How to Make a Kopernicus Planet | Kerbal Space Program
Ойындар
Example config: pastebin.com/e4uXdbkp
Tangram Heightmapper: tangrams.github.io/heightmapp...
Kopernicus wiki: kopernicus.github.io/wiki/
Orbit node: kopernicus.github.io/wiki/con...
Material node: kopernicus.github.io/wiki/con...
KittopiaDumps: github.com/Kopernicus/kittopi...
PQS/Scaled fade explanation:
ScaledVersion's fadeStart is when the fade from scaledversion to PQS begins, it should be the lowest value.
ScaledVersion's fadeEnd is when ScaledVersion is fully faded out, it should be higher than ScaledVersion's fadeStart.
PQS fadeStart is when PQS fades in, it should be the same as ScaledVersion's fadeEnd.
PQS fadeEnd is when PQS is done fading in, it should be higher than PQS fadeStart.
For example...
ScaledVersion
{
fadeStart = 10000
fadeEnd = 20000
}
PQS
{
fadeStart = 20000
fadeEnd = 30000
}
Music Used:
RetroFuture Clean - Kevin MacLeod
The Show Must Be Go - Kevin MacLeod
Пікірлер: 134
If you didn't understand this (I don't blame you) just use the example config pastebin.com/e4uXdbkp
@uohhhhh-sob-
Жыл бұрын
you forgor to put link for tangram
@oliverjudson1834
10 ай бұрын
can i download the planet
@Sushut
10 ай бұрын
@@oliverjudson1834 not this one specifically, though i do have an example system: spacedock.info/mod/3445/Example%20Star%20System
@undeadvoxel
Ай бұрын
Can you tell more about DDS? Which settings better for ring textures?
@Sushut
Ай бұрын
@@undeadvoxel DXT5 compression for rings. mipmaps are optional
Finally a modern how to make a planet in kopernicus video! Great job! 👍
instructions unclear: i made a planet called tyler that has an orbital period of 5 seconds
@liamjones8532
Жыл бұрын
(i copied tylo and changed it)
@Voice_from_the_Void
Ай бұрын
your just flying your craft and suddenly it just gets fucking slammed by tyler
@finnokeefe189
29 күн бұрын
@@Voice_from_the_Voidnow make giant bowling pins
@notjebbutstillakerbal
23 күн бұрын
@@Voice_from_the_Void strike 😂
Very nice! About as simple as it'll probably ever get for explaining even if it's a bit breakneck!
Finally an actual tutorial that isn't garbage.
Kevin always participating in the video with his songs
Wow! Looks easy, which is just what I need. I have big plans for a system, but had no idea where to start until now.
The texturing tutorial is super helpful, I might use that to mod some planets into Outer Wilds!
Semimajor axis is actually the mean of the periapsis and apoapsis, the lowest and highest points of the orbit respectively. (Really it's half the length of the widest dimension of the ellipse, but the geometry works out the same if you measure the periapsis and apoapsis from the very center of the parent body).
kyle: rotates 20 times a second
Cool! I always thought that a planet with mountains that extended above the atmosphere would be great in ksp2, but now I can have it in ksp until ksp2 gets interstellar travel in a few years
This is really good Sushut, love this!
Very cool! I doubt that i myself will make a mod/planetpack but i might just do it! I would love other videos about stars, and black holes!
a bit of advice is you should use a lot more samples than the ones used here because planet terrain is much more low scale and you dont see planet sized mountains and rivers really you can also do this heal tooling with coastal images to take more control of the continent shapes
@Sushut
Жыл бұрын
i entirely agree, i just used less for the sake of simplifying (and because i'm incredibly lazy)
I played with Haegemonia (old space RTS, love it) it has some great planet textures. I'll try to implement them into ksp
Thank you Lord Sushut for this wonderful knowledge that will make everyone like and subscribe
Very useful ❤
Can't wait for next video about Kopernicus! it would be interesting to see the same about scatterer and eve, and possibly singularity. Upd: I understand correctly that the red giants from infinite discoveries have relief due to height maps?
@Sushut
Жыл бұрын
Infinite discoveries red giants are a bit tricky since heightmaps don't work on stars. What you do to get heightmaps on stars is: 1. Make a regular planet (doesn't need a color map or normal map, just height. 2. Copy the cache of the planet (usually generated in the Kopernicus mod folder if not specified elsewhere) 3. Set the cache of the star to the planets cache folder. Since the mesh of the planet is stored in the cache, the star will take on that shape.
@undeadvoxel
Жыл бұрын
@@Sushut when i made my planet i used atmospheric calculator. but i not see this crowd of numbers in Zive system planet configs. does amtospheric calculator no more actual?
@undeadvoxel
Жыл бұрын
@@Sushut why my heightmap not working? i used .dds L8 format but planet is just smooth sphere.
Thank you so much! I was looking for a newer Kopernicus tutorial to start making my own planets! But I have a question, could you maybe do a video like this but for planets that done have surfaces, like gas giants or stars? Was wondering how to do that.
@Sushut
Жыл бұрын
for gas giants you just remove the PQS node
@thespacedinos4037
Жыл бұрын
@@Sushut thanks
HE FINALY MADE IT
This video makes me want to make KSP planet pack
I have to download this secret magic!
Hey, great tutorial! Really appreciate how concisely you show how to do this, because all of the other tutorials are really... dense, lol. I'm having an issue though, when I launch the game with my custom planet Kopernicus gives me an error message ("wasn't able to load the custom planetary system due to an exception"). I tried copy+pasting one of the Quackpack planets to make sure all the syntax was correct (overwriting texture files and orbit etc), still wouldn't work. Re-exported all the images from GIMP double checking it was done correctly. Still isn't working. I'm wondering if you know anything else I could try to get my planet in the game? Thanks!
@Sushut
4 ай бұрын
there's so many causes for this error, do you have any way to send me the kopernicus logs?
@shaddaboop7998
4 ай бұрын
@@Sushut I could send them to you over Steam or Discord if you'd like
@shaddaboop7998
4 ай бұрын
@@Sushut Just looked at the logs, modified Quackpack has a very strange error saying "failed to read to end of stream", the standalone mod I made says "Value cannot be null. Parameter: type". Type is set to Vacuum and I've double checked spelling and syntax so I'm assuming there's another issue here.
@Sushut
4 ай бұрын
@@shaddaboop7998 you could do it over discord, my username is luckily just sushut (I'd also like to read over the config myself)
@shaddaboop7998
4 ай бұрын
@@Sushut I think I've (sort of) resolved it. Seems to be that it didn't like me changing the extension on a .txt file to .cfg. Instead I can copy+paste a Quackpack .cfg file, completely remove the code, and then write in my code, and it doesn't give me any errors. Planet's implemented and working now, thank you so much for the tutorial and your offer to help me personally, really appreciate it!
I AINT DOIN ALLAT🔥
Day 1 of asking for part 2 about rings
I'm a consol player so I don't know how to do sh*t 😂 I love your content, keep up the great work!
he is the messiah!
i want to now. Ty.
Tried it twice and the first time, it didnt show up at all and the second time (Which I used the pastebin one you made and just changed it to my folder names) the game gets stuck loading when I try load up or start a new save.
@Sushut
Ай бұрын
double check if the paths are correct, it should only be forward slashes / and not backslashes \
noted.
cool! can you also make stars with this?
@Sushut
Жыл бұрын
yeah
Can you make a tutorial on how to make custom parts mod. Adding your own parts to the game.
@Sushut
8 ай бұрын
i myself barely know how, so I'm not ready to teach others
yooo bro made this
Next video: 142 hour tutorial on how to get a new brain
I will test space engine planet textures
What version of Gimp do you use? I have 2.10.18 and I don't have the DXT5nm format for normal maps.
@Sushut
Жыл бұрын
i can't remember, but some of them are in the "compression" drop-down menu if that helps
@sudantarescosmonautics9422
Жыл бұрын
@@Sushut first of all, you probably use the 2.10.34 version of Gimp, just downloaded it. Secondly, you were right. For the export of normal maps, the named format is under the drop-down menu "Compression", named BC 3nm/DXT5nm. Thanks man! 👏👍
Is there a way to add moons, I'm quite new to doing stuff like this but I would assume to put a smaller planet or moon near the same orbit?
@Sushut
8 ай бұрын
you set the referenceBody in the orbit node to whatever you want it to orbit
@shuffless4780
8 ай бұрын
@@Sushut Oh, that should have been obvious to me haha, thanks!
What version of KSP did you use?
@Sushut
Жыл бұрын
1.12.5
i am waiting for part 2
@Sushut
11 ай бұрын
same
interesting
hi, i didn't find the material node, were is it? i know that it is in the wiki, but where?
@Sushut
Жыл бұрын
under PQS, there should be some mention of it, if you cant find it anyway, just use the config i made in the description
@spacetimporal
Жыл бұрын
@@Sushut i solve it, thx
Juno new orgins is much easier and has a lot more options for building planets bro
@Sushut
6 ай бұрын
But the funny little green men!!!!!
@bigstock21
6 ай бұрын
Sorry I just like Juno
Could you explain why i dont have any terrain and my planet is pure red? (i used your pastebin code and i cant change the color, i use my own textures but still need help)
@Sushut
3 ай бұрын
can you explain with a bit more detail? i don't understand
@MrMonkey3
3 ай бұрын
@@Sushut Basically, I go to my planet its completely red when i teleport on it its completely black i cant change the color and its flat so i need help if posssible!
@Sushut
3 ай бұрын
@@MrMonkey3 Do you have any way to send me screenshots and your planet's config?
@MrMonkey3
3 ай бұрын
@@Sushut i could use the ksp forums ill dm you
@Sushut
3 ай бұрын
@@MrMonkey3aight
may i ask as how one would make a star? edit: figured it out
@Sushut
Жыл бұрын
tutorials take a long time to make, you want you can ask in the intercept discord
@comedyatitsworst
Жыл бұрын
@@Sushut aright, thank you!
Hey i used the config and made the planet diameter 30000 but its around 100000 diameter and all glitchy. the close up terrain is all huge low res squares. Plz help
@Sushut
Жыл бұрын
it's radius, not diameter. there's a lot of ways it can break so I'd recommend sending some screenshots of the issue to me on discord (if you can)
@a_coloradan8689
Жыл бұрын
Alr ill send some in a couple hours im on a trip rn
Hey guys, I need help with Infinite Discoveries. I know it's not to the vid it self but I'm strugguling to make galaxies using the mod... I moved the InfinteGalaxy_Mode to the GameData folder but nothing happened... what am I doing wrong?
@Sushut
Жыл бұрын
Infinite discoveries galaxy mode only moves it's own stars, if i'm understanding correctly you're trying to move non-infinite discoveries stars?
@michaelkuba1180
Жыл бұрын
@@Sushut no no I tried the usual setup for generating stars, and expected that I'll form a galaxy. But it didn't function even with the InfiniteDiscoveries mod in the GameData folder and generated stars by the mod. I have 3 folders in my GameData folder, Infinite_DeflateStars, Infinite_GalaxyMode and InfiniteDiscoveries. I had used the program, I have Imagemagik installed, I don't see where the problem is.
@Sushut
Жыл бұрын
@@michaelkuba1180 it might have worked but have been more subtle, not too sure exactly what's wrong though
@michaelkuba1180
Жыл бұрын
@@Sushut Well I tried only 3 stars in my galaxy so that might be it, idk if there's any minimum limit. Though thanks for the support! Keep it up we all love your work!!
4:57 I know what you are.
I want to make a ocean world lol
That's such a cool and well made video sure would be a shame if someone used it to turn Obama into a planet
I cant blend the pictures together because it will fully erase it
@Sushut
Жыл бұрын
are you using gimp? if so then reduce the eraser's hardness in the tool options menu
@keylaneproductions1977
Жыл бұрын
@@Sushut oh
Waulta
Am I able to use this same code to make a custom planet of my own?
@Sushut
Жыл бұрын
yes, the config provided in the description is free to use
@carcrasher2970
Жыл бұрын
@@Sushut how do I download the modding software tho
@Sushut
Жыл бұрын
@@carcrasher2970 i don't understand, all you need is something to edit images, a text editing program and a mod for ksp called "kopernicus?"
@carcrasher2970
Жыл бұрын
@@Sushut I know I’m saying a download link for the kopernicus mod
@Sushut
Жыл бұрын
@@carcrasher2970 github.com/Kopernicus/Kopernicus/releases
Is it possible to replace planet/moon textures without mods?
@videosresubidos1926
Жыл бұрын
In KSP 1
@Sushut
Жыл бұрын
@@videosresubidos1926 no, you can't edit the game without some form of modding involved
@videosresubidos1926
Жыл бұрын
@@Sushut ok, Wich mod do i need?
@Sushut
Жыл бұрын
@@videosresubidos1926 kopernicus, i suggest you ask somewhere other than youtube comments tho since it's very difficult to explain here
@videosresubidos1926
Жыл бұрын
@@Sushutyo ik i should ask somewhere but, you know the bug that doesn't let you open a world?
song?
@Sushut
Жыл бұрын
in the description
@june474
Жыл бұрын
thanks
I wonder if ChatGPT could do this?
@Sushut
6 ай бұрын
people tried, it usually doesnt do well with anything other than python
more
Why does it have to be so complicated I just want to make a skrunkly little garbage planet 😭
@Sushut
5 ай бұрын
ksp is very stubborn i guess
not work. not in game
@june474
Жыл бұрын
but thanks
i understood nothing 🔥🔥🔥
ok so i followed your tutorial exactly (other then the textures, name, etc) and the hightmap would not load without compressing it to dxt1, then when i load a save it loads for a while and then crashes, and in kopronicus.log it seems like nothing was wrong edit: i accidentally misspelt "plugindata" and now that i corrected that i have a white sphere floating around jool in a polar orbit named "werlo"
@Sushut
10 ай бұрын
that's strange, can you send me the full kopernicus logs on discord? (the zip in KSP/Logs/Logs-Kopernicus .zip or something) (My discord is Sushut)
If you dont wanna type it, copy it from here AtmosphericTriplanarZoomRotation
@arandomyoutuber1785
11 ай бұрын
triplanar*
@Sushut
11 ай бұрын
you can edit comments