Nice retrofit, cool bike..

That thing hauls!

As exciting as it is to install performance parts, it was very smart not to do the transmission mods, until you tested your engine mods. Had you modded the engine and transmission at the same time and had problems, it could’ve really muddied the water trying to diagnose the problem. 01:15

dude i just love the colors on that met, that pearl white is like Mercedes pearl white lol

I would love to see a metropolitan ii build. An informative video on the difference between the regular metro the metro ii and the ruckus would also be very helpful. Thanks Dave

😳🤯 Wow what a difference! 00:44 00:55

Awesome!

Hello I’m in need of some piston rings for the Malossi 70cc cast iron bbk for my 94 Honda elite. Do you carry them?

How much snd where did you get the parts?

That speedo looks fast

can you put a cold air intake in a metro?

We put 80 big bore kits in many of our wolf scooter and get 48mph out of them for the cost of under$200. that's parts and labor. R-3

I need a big bore for a 2005 honda metro II. I can't find anything online. Do you have one?

What can I do to get my 2020 metropolitan faster

What is the best gears to put into a 150 GY6 in the rear end

@RollingWrench

5 жыл бұрын

8% www.rollingwrenchdenver.com/products/gy6-gear-up-kit

Goodnight. I have a doubt since about a month ago I installed a new battery to my Honda Metropolitan 2005 and it was running two days and then stopped turning on by button. so it forces me to charge the battery constantly or turn it on by the pedal. How can you solve this problem?

I wish I could have someone like you help me with this modification; I'm handy but afraid... you're not kidding the top speed is about 35-38 mph GOING DOWN HILL AND WIND AT YOUR BACK.... the state made me get a motorcycle license for this slug... barely goes 32mph to 35mph. ONly 1500 miles since I bought it new too... and starting this back up again. Quick question: this was the first time I tried to fill it with air and I can't because the wheel rim gets in the way. I have just ordered a right angle inflator adapter.

I have a 2015 honda metropolitan and want my scooter to have better performance. Should I do the cdi/ coil combo or the big bore kit??? It is so weak right now. Even on the streets the cars are always passing me with my 35 mph scooter. Guidance please!

@RollingWrench

5 жыл бұрын

Unfortunately the 2013-2015 metros are the slowest on the planet! Buuuuut they are the only metros that accept a big bore kit, and the most upgradable. Definitely do our performance package. A big bore kit alone won’t satisfy. This is the kit you need to put a smile on your face: www.rollingwrenchdenver.com/products/honda-metropolitan-81cc-big-bore-kit-performance-package-2013-2015

I have a 2009 GET Metro. GPS said 47 mph with only a custom variator, custom filter using UNI foam and Moto-seal using the stock airbox and intake (I used the original air filters metal frame so it drops right in), small filter on crankcase breather tube, Gates power belt and a step up on the main jet. Lucas oils and fuel conditioner. Cruises at 35 and still gets around 90 mpg. Cost was about $100 USD. Edit: carburetor restrictor was removed as well. Also.. Keep your lifter shims in spec!!

@RollingWrench

3 жыл бұрын

Heck ya!!! But your comparing two different engines. The 2013-2015 engines are the slowest. The one in this vid. Your engine is referred to as a GET engine. Those are great as well

@TheSinkingGarage

3 жыл бұрын

@@RollingWrench I wasn't comparing anything ;) Only possibly helping others :)

@RollingWrench

3 жыл бұрын

@@TheSinkingGarage I just wanted to be sure you and other readers understand the difference:-)

@TheSinkingGarage

3 жыл бұрын

With my enthusiasm I neglected to mention that top speed is only increased 3ish mph. However the acceleration is great with stock 6 gram roller weights. Rider weight 170 with additional gear. 5.5 to 5.0 rollers would likely put it right in peak torque/nm in conjuntion with the Polini white spring on the clutch end of the transmission (the "shift" point,). No noticeable wear on the "ramps" with the increased spring pressure. With the valves adjusted and in spec I have experienced valve float. This is using the stock US spec CDI (rev limiter programmed into the CDI is relevant). This happened with a 8 year old engine with tons of high speed riding. I would definitely refresh/replace valve springs if the engine needed service for something else or if the engine was removed.

Does a big bore kit make it no longer a 50cc and thus you’d need a motorcycle license for the locations who need one if the cc the exceeds 50?

@noahgullion2

2 жыл бұрын

Yes, but it’s unlikely that anyone would know you modified the engine

What's the total cost?

Denver*

Do you sell that tuning device separately? And is it pretty easy to install? I have the variation and final gear drive already, no big bore, was wondering if the tuner combined with my current setup will show more gains

@RollingWrench

6 жыл бұрын

We can sell the tuner separately. It's $225. I wish I installed the variator and final drive gears before the big bore kit to see the difference. How does the 50 handle the final drive gears? What is the top speed. The big bore kit with out the final drive gears it would wheelie!

@nickklein9715

6 жыл бұрын

Rolling Wrench ATV Scooter & Motorcycle Repair I don't see a huge difference with the upgrades except for the low end, I want it to go at least 43mph and I'm at 38 on flat crouched over at 150lbs

@RollingWrench

6 жыл бұрын

Nick Klein I can tell you at a mile above sea level (we loose 20% of our power) I can do 50 mph on a flat with this upgrade. Brakes at that speed need to be upgraded I will say. Still stops but not like I would like.

@nickklein9715

6 жыл бұрын

Rolling Wrench ATV Scooter & Motorcycle Repair give me a link to buy the ecu tuner

@RollingWrench

6 жыл бұрын

Nick Klein www.rollingwrenchdenver.com/products/honda-metropolitan-fuel-injection-tuner-2013-2015

Okay pretty cool but what about those tiny ole wheels? Does she go flying when she hits bump in the road?

@RollingWrench

2 жыл бұрын

The wheels are not to big of a deal. Same size as old Vespas 10 inch. The drum brakes could use a little work :-)

I have a 2015 met and I have been looking since I bought it to make it faster. Where did you get.your parts and how hard was it to install?

@RollingWrench

6 жыл бұрын

Dennis Gilby we sell the parts. The install is basically the exact same as the qmb139. It took about an hour and a half to install it. www.rollingwrenchdenver.com/products/honda-metropolitan-95cc-big-bore-kit-performance-package-2013-2015

@benjaminharrell6345

3 жыл бұрын

@@RollingWrench I have a2013 what do I do to take restriction off my metropolitan

@RollingWrench

3 жыл бұрын

@@benjaminharrell6345 there really isn’t any restrictions. They are just slow. Big bore it.. problem solved

@jayrichman9643

Жыл бұрын

@@RollingWrench do you have an online shop? I have a 2009 Honda Metro, I’d like it to go faster, thanks!

Been looking at getting one of these for the girlfriend

Is it true that doing this basically ruins the bike where it doesnt want to start anymore?

@samarmstrong4328

4 жыл бұрын

No it will be bored so it makes it way more likely to blow up it’s pretty much a ticking time bomb

I just want to get 40mph, any tips without being so costly?

How much do the one you just put in on your wife moped cost for the whole kit

Could this work on a 2009 Honda metropolitan?

@RollingWrench

3 жыл бұрын

No :-( different engine

I cant fine the rear gear would any body know the name of it and or the link to it amd the variator and what rollers

@RollingWrench

5 жыл бұрын

We sell all these parts email us

@RollingWrench

5 жыл бұрын

www.rollingwrenchdenver.com/products/honda-metropolitan-81cc-big-bore-kit-performance-package-2013-2015

I'll just keep it Reginal and see how long it lasts😊

would this work with the metropolitan 2002?

@RollingWrench

6 жыл бұрын

Unfortunately no

@anconamariah808

5 жыл бұрын

Why not?-! And what about a 2009 thatbobly goes like 15 but the speedometer numbers go up to 70mph never gotten above 15

How does this new kit 81cc still perform as good as the 95 with the small valve stock head? Very confused. Kit shown is discontinued but identical description for a smaller kit with stock head.

@RollingWrench

5 жыл бұрын

It performs very well. I have videos of both kits. They don’t have the same description. The 81cc comes with less parts. They are both capable of 50 mph. It doesn’t have as much low end power as the 95cc, but still very impressive. Check out the other videos for comparison

how much did it all cost?

@RollingWrench

6 жыл бұрын

Dom $875 half the price of the scooter :-) www.rollingwrenchdenver.com/products/honda-metropolitan-95cc-big-bore-kit-performance-package-2013-2015

Understandable,but if everybody could make a bike do 50 with no license we would all be rich

How do you know it goes 50mph if the speedometer only goes up to 40?

@RollingWrench

2 жыл бұрын

GPS on my phone

If you install the longer gears without the kit could you go faster

@RollingWrench

6 жыл бұрын

Carolina fishing and outdoors o ya for sure! I wish I tried that out before the big bore. Let us know we can sell you the gears

@NINJUNK00

6 жыл бұрын

I think Ill need them im buying a metro with the hope to throw in a forza 300 engine in it but if that fails I'm gonna build a 150 to 200cc with a bb kit

@07350zhr

6 жыл бұрын

Rolling Wrench ATV Scooter & Motorcycle how much are the gears and will it work without the bore kit? Have you tried it yet.

so this wont work on post 2015 models at all?

@RollingWrench

5 жыл бұрын

Yes it will: 2013-2015

@browntigercat

3 жыл бұрын

@@RollingWrench my 2014 Metropolitan is Liquid Cooled. Can I still use your tuner to eliminate rev speed limiter?

@RollingWrench

3 жыл бұрын

@@browntigercat it would probably work, however the metro tuner doesn’t delete the rev limit :-(

I don't understand why Honda made the Metropolitan slower. I have two 2009 Metropolitans and they both will do 40 m.p.h. easily. They are the CHF 50. Some of my friends have older Metro's and they will do 40 m.p.h. as well. Now these new Metropolitan scooters will only go 35 m.p.h. What's with that?

@RollingWrench

4 жыл бұрын

Ya, I don’t know what’s up with that. I will say my favorite metro is 2013-2015 since they are upgradable

@Joe_shmoe1

Жыл бұрын

State laws on mopeds

@darcychu9652

5 ай бұрын

Emissions control regulations also restricted the performance of bikes!

@kellyroyal9579

14 күн бұрын

Ye I got one from some guy off fb marketplace and it’s like 2005 maybe and it hits 40 np if not more but I’m new so I’m worried about going faster lol

Why no GPS proof?

@RollingWrench

10 ай бұрын

I guess I thought you would trust me.

Why not just swap out with a ch80 motor, and build up from there?

@RollingWrench

3 жыл бұрын

That’s an option:-) probably would require fab work

The Honda scooter sure looks boring, but it sounds good.

Did your wife notice that you put a kit to it?

But lets not forget that a crash at 50 mph is no different just because you're in a scooter. "Just a helmet" is not applicable here. You will be seriously maimed crashing at 50 mph without proper protective gear. Also- they may not have designed the moped to properly brake (with control) at 50 mph. Think safety!

@fishmonger1526

5 жыл бұрын

I agree, these Metros really don't have the braking power to slow down great from 50mph, let alone 40mph. A bike with larger tires and disc brakes like an Aprilia would be better suited.

2.4.23 no war

My zuma can go 55 mph and it cost me 3k out the door

@RollingWrench

6 жыл бұрын

That is the better option :-) however I see it everyday. Someone buys a scooter they didn’t expect to be so slow. Here is my fix for that :-) plus I have a Honda infatuation

i had two 1985 50cc honda scooter they had more power.

50mph on a metro is flying i bet it’s sketch at those speeds. I know I can get to 45mph and that feels little sketchy but ok!

Video literally shows you begining and end result. Nothing on how the process actually was changed or install. Pretty dissapointing.

@RollingWrench

3 жыл бұрын

If you want that you can use this video same process kzread.info/dash/bejne/ppyrx7CgfZrTj84.html

Just get a license and buy a 110 cc

@RollingWrench

7 жыл бұрын

Derek Boseley I think you are missing the point. 50cc scooters: park on the sidewalk downtown, don't need to plate it, and don't have to have a motorcycle license. Plus how fast can I get a metro to go !!! :-)

@damianbartlett1536

5 жыл бұрын

Rolling Wrench Bingo.

all for 14 extra MPH......

@RollingWrench

5 жыл бұрын

And like 3 times the power

@sjohnson7735

5 жыл бұрын

Double the horse power for about 12 extra mph?

@RollingWrench

5 жыл бұрын

Steve Johnson probably 3 times 🤷‍♂️

$900 a bit steep to increase a dozen miles an hour on this scooter. Just buy a used 150 scooter .

@RollingWrench

3 жыл бұрын

The reason not to upgrade to a larger scooter is because the laws change when your scooter is registered above 49cc

@TheSkyPod

3 жыл бұрын

@@RollingWrench Gotcha . Has anyone ever been pulled over (cop) and had there bike checked for big bore kit ?

@RollingWrench

3 жыл бұрын

@@TheSkyPod I haven’t heard of it

Plus downtown girls are pathetic.but I see your pount.i would do that then get caught .Nice mods

$875 for the kit? it would be cheaper swap in a gy6 150cc motor.

@RollingWrench

6 жыл бұрын

No one make a mount, you would need a harness, it would look stretched, waaaay more work, no longer a Honda motor, and it wouldn’t be fuel injected. Bad idea in my opinion.