Tip when you check your oil don’t screw the dip stick in then pull out just put it in till it touches then remove and check level.

“I apologize in advance if my methods are fucked” 😂 good video man really clear and straight forward

I like it when people take care of their rides, even if they are "cheap pitbikes"

Love the vid should definitely make some pitbike adventures or of you just riding around and talking

Little tip I learned is to use thicker oil, I’ve used 20-50 in my little tao tao and it runs amazing. I’ve also learned it works well for hot weather on air cooled bikes

My Chinese pitbike is a thumpstar.190 Another tip don't ride it like I ride mine and break 3rd gear off 😁. One good thing about having to rebuild my motor is finding out zongshen uses junk valve stem seals. Luckily for me 2018 KTM 250sxf valve seals fit. 😲. While valves apart I ported intake mildly and polished exhaust side and smoothed valve guide mounds. Next wet sanded squish area in valve pocket area to remove any casting dimples to eliminate hot spots and detonation. Cleaned valves and lapped them in being they were never lapped from factory. I also welded a mounting point for an upper chain roller instead of the junk rubber bumber these bikes come with

Will crf50 style plastics fit on the bike?

do u add that gas to both tanks? and that is 4 stroke gas right

Wat size is your rear swing bolt ??

very helpful

I put 20w 50 sinthtic in mine and it seems to run a lot better it seems quicker and sounds better I would suggest using it

Adjust the chain by having weight on the bike. When there is no weight there is suppose to be a little slack

What’s the spark plug gapped at??

What is the yearly maintenance cost? Roughly?

I heard the ngk 9 to 7 was the best

can you use 10w-30?

Change the oil like every 4 or three months hours of use not every summer and put a plastic grocery bag over The air filter Or else you were going get water in your carb

Thank you

That oil doesn’t have “JASO MA”

Nice video, great professional job