How To Lower And Rust Treat Your Mk7 Ford Transit!
Автокөліктер мен көлік құралдары
In This Episode I Try To Show Case How To Lower And Rust Treat You Mk7 Ford Transit With A Step By Step Guide, Sort Of Lol.
Hopefully This Video Has Helped You If You're Wanting To Lower Your Transit, If It Has, Please Let Us Know By Giving The Video A Like And A Share So Hopefully It Can Help Others To.
If You Like This Video And You're Not Already A Subscriber, Please Consider Subscribing To The Channel To Keep up To Date With The Progress On The Van Or The Other Projects.
Check out The Links Below For The Suspension Parts Iv Used:
Leaf Spring: www.modyourconnect.co.uk/prod...
Gaz Shocks: www.modyourconnect.co.uk/prod...
And Click This Link If You'd Like To Protect Your Van With Lanoguard And Save A Few Quid:
snwbl.io/lanoguard/TERRY25980
Below Is Some Links To Some Of The Tools You See Me Using In My Videos
Milwaukee Grinder:
amzn.to/3PnXhjI
Milwaukee Die Grinder:
amzn.to/3sEo2rl
Milwaukee Belt Sander:
amzn.to/4822TaY
Roloc Sanding Disc:
amzn.to/3sN6Gsc
Sanding Belts:
amzn.to/3R7MzPB
R-Tech Mig 180:
amzn.to/3R55ZEU
Zinc Weld Through Primer:
amzn.to/45RgEam
Crimped Wire Brush For Angle Grinder:
amzn.to/45TBHco
You Can Also Find Me On Instagram @t_devil
if you'd like but me a coffee check out the link here... www.buymeacoffee.com/Terrymoore
For Any Business Enquiries Email Me @: Tdevil1@hotmail.co.uk
As Always, Thanks For Watching And Hopefully ill See You In The Next One.
#ford #rust #rusttreating #milwaukeetools #rtechwelder #mk7lowering #vanlife #workvan #mk7transit #fordtransit #builtnotbought #lanoguard #howto
Пікірлер: 42
Looks wicked fella 👌
@Tdevil86
2 ай бұрын
Thank you mate 🍻
Nice job Tel. Shes looking smart!
@Tdevil86
2 ай бұрын
Thank you George
Looks cool Terry I do like them looking lower 👌and a wise and smart move trying to get more longevity out of your work vehicle I’d say . So I guess a wide arch kit next then 🤔🤣
@Tdevil86
2 ай бұрын
No no no, no wide arch stuff on this, I need paint it next and then leave it alone before it gets out of hand and ends up on a rotisserie lol
Actually glad i watched this one, was going to get some Lanoguard a few weeks back for the Golf. Ill probably get some the end of the month using the code if i can swing some time on the ramp. Always wondered what it applied like.
@Tdevil86
2 ай бұрын
It’s good stuff to be fair, it’s so easy to apply, the worst bit is cleaning the underside and rubbing off all loose rust, underseal etc, well worth it in the long run though if it’s going to protect your car… I wish I could have used a ramp though, that would have been amazing!
Crackin video Terry. All the things I want/need to do to my mk7
@Tdevil86
2 ай бұрын
Cheers buddy, you should do it, lowering mine has definitely made it feel less boat like around the corners etc!
@paulhaybyrne
2 ай бұрын
@@Tdevil86 Imagine how I feel tottering round on bog standard 15 inch rims 😁 it’s like driving round in a shopping trolleynew wheels and lowering are on my list thanks to your vids
@Tdevil86
2 ай бұрын
Haha, I know that feeling all to well! I do still have the other banded 16” steels here if they’re of interest to you? They do need a couple of tires, and a good rub down/paint etc
Awesome fella looks shweeeet AF 👍 especially with the banded wheels. Can't believe how simple the front is to do
@Tdevil86
2 ай бұрын
Can’t go wrong with banded steels, I still need to sell the other set i have yet lol Front is stupid easy and takes no time at all, the rear was surprisingly straight forward aswel to be fair
I've got the L2 H2, full toys 140-330.. totally love it but yeah, she likes to rust underneath. Would love to make it look cooler, but I need that travel because my loads need it, Love a Mk 7, even though they don't handle in the wet..
@Tdevil86
25 күн бұрын
I’d highly recommend the lanoguard mate, even now the underside on mine looks spot on! You can still make them look decent with travel, get some off-road style wheels, a guy on Facebook has a lifted 330 on nobbly tires and that looks pretty damn menacing to be honest lol
Loving the video buddy can't wait to get mine done. Where in the country are u .
@Tdevil86
Ай бұрын
Get it done mate! I’m down south around Eastbourne
They normally lower themselves when the suspension collapses through the rust 😂😂😂😂❤
@Tdevil86
2 ай бұрын
Ain’t that the truth 🤣
looks 10 x better mate 👌
@Tdevil86
2 ай бұрын
100% mate, I’m well happy with how it’s coming together now, repaint next though 🙈😅
Love the lowering !! Terry, do the tyres clear the arches when the van is loaded ??
@Tdevil86
Ай бұрын
Hello mate, iv had some very very minor scrubbing on the rear when loaded, I think ideally I need a 60 side wall on the tires rather than 65. The front has been the worse but I am planing on rolling the arches a little before I paint the van
getting hot + sweaty under an old tranny, good weekend for some... i now have an idea of how to raise front suspension on my brother's ecosport... in the old days, if your leaf springs were flat, you got done for over-loading, regardless of what weight was in the back, i would be tempted to keep the reciept for springs in van...
@Tdevil86
2 ай бұрын
Haha, atleast this is then right kind of tranny to have spent my weekend with lol Because the van does lean back a little I have been fully expecting to be pulled over but thankfully that’s it been the case yet. I think it’s abit more ‘normal’ to see a lowered van with aftermarket type wheels these days so maybe they’re not to bothered anymore?
Great video mate. What size are you wheels?
@Tdevil86
20 күн бұрын
Thank you mate, mine are 16x8 on the front and 16x8.5 on the rear. You can go 9j on the rear but Anything wider on the rear you run into issues with the side door opening properly.
@mke1984
19 күн бұрын
@@Tdevil86 thanks Terry. You know the part where you did the sills. You said u sanded, rust treated, primed and then stone chip sprayed. Was the stone chip just on underneath or on outside of van, did you get stone chip colour matched? Thanks
What’s happening to the escort van mate? To many projects?
@Tdevil86
2 ай бұрын
Actually been contemplating selling the van but I think il fix it first and use it for abit before I make any decisions. The money from the van could go a decent way towards one of the cars…
Wondering if those 2nd set of banded wheels are still up for grabs
@Tdevil86
Ай бұрын
They certainly are, 300 takes them
@deanmichael3558
Ай бұрын
@@Tdevil86 ok are they balanced
@deanmichael3558
Ай бұрын
How can I contact you
@Tdevil86
Ай бұрын
@@deanmichael3558 I think they’re ok for balancing to be honest, they could with a rub down and repaint though ideally, as you’ll see in the video they’re painted badly with chips all over… Bung us a msg on instagram if you want them chap instagram.com/t_devil?igsh=eXZyaDJwamczeXpm&
Why would you want to lower a transit
@-Astro--
2 ай бұрын
Are you new here? 😂
@Tdevil86
2 ай бұрын
To keep myself entertained lol
@shauncourty4208
2 ай бұрын
Everything needs lowered ……..
@stephenbradley5805
2 ай бұрын
And why not lower it, I lowered my Nissan navara np300
@stuartrobson4891
2 ай бұрын
I think the question you should ask is...... why wouldn't you lower it?