I think this is a great approach to lighting a dark scene like this-- and bouncing lights with focusing lenses allows a lot of flexibility in placement. For a scene that's mean to be more high key, you could use some of the same tricks, but you might try to introduce some practical light sources (such as lamps or more windows) and use similar techniques to build on or extend that practical lighting (overhead tube lights and bounces are great, you can also use thin, lightweight lights like Litemats). If you're using windows for "daylight," then it's also common to use high-powered sources to pump a lot of light through them (such as an HMI or the Aputure 600D).

4MINUTEFILMSCHOOL?? Ah well… the more the better I guess

3 жыл бұрын

20 minute film School 🤣

Love this Kevin+team! I'm personally a sucker for large soft overhead sources for lighting big spaces. Especially for lighting large studio environments (like lighting a car), or even outdoor environments (using a blimp), big soft overhead sources can look great. Awesome tips guys, great video as always!

the crls system is soooo amazing and paired with the 60d it's game changing !! lighting from above is always amazing, love using my 7ft umbrella !!

@aputurelighting

3 жыл бұрын

Right?!

I have my very first one take commercial coming up next weekend! This was super useful and will definitely be applying some things I learnt. Can't wait to share!

Definitely a great look. Though I had a few suggestions for the format of the video itself. At times, it was a bit difficult to follow and to narrow down what each light was doing. This was made especially challenging when the flashlight was introduced. I would have loved to have seen it light-by-light and also without the flashlight, so that we could get a feel for all the individual components. It was only really clear to me what all was going on and how the space was oriented after the diagram came up.

This is one of the best ones you guys have done. Nice work!

Wow! So many good tidbits in here! LOVED the chalk bits in the air. I’ve always wanted to know how you get atmosphere with “specks” in the air.

@aputurelighting

3 жыл бұрын

Our production designer Day knows what's up!

My first instinct would be to use flex lights (Aladdin, LiteMat, FalconEyes, etc) up in the ceilings and connect them via DMX to have full control.

Love the mirrors used to spread out the light, yet keep it directional. I probably would have had more hard light coming straight down here and there to walk in and out of and make some truly darker areas, but that's just me.

@aputurelighting

3 жыл бұрын

Great suggestion!

I’m a big fan of using a lantern overhead for more high key scenes, but I’m really loving the idea of combining spotlights with bounce for more pooled looks. I wonder how different this scene would have looked if the spotlights bounced had have had some organic/random gobos in the attachment? Happy birthday :)

@aputurelighting

3 жыл бұрын

Will definitely do a video in the future playing around with those new gobos!

C500 + the kowas fare so good together. Great job Kev!

Very good video with clear explanation...I just lit an indoor scene where I replaced two overhead tungsten lamps with 2 B7c's and the final lamp that was around a corner with a one foot bicolor quasar mounted on a stand with a dimmer bouncing off the ceiling. I placed two Aputure MC accent lights facing wall artwork on a table and blocked by a chair or hidden and one Aputure AL MX as another wall art illuminator...the subjects were lit with two bicolor panels...all were set to daylight to be motivated by patio door. I learned about Aputure from my son...who has a large amount of Aputure gear in Atlanta. On the next day's shoot I used the Aputure 60D with some Rosco diffusion as key light outside with two batteries with overcast sky with a panel on the fill side...my HMI's did not leave the truck...the future is here...lighter and less complicated with control and power...plus bicolor or multicolor...

Awesome content! Can't wait to try out some of these techniques.

What a complex setup and a dynamic scene. Thanks a ton for this. How would I light a big space? I would have to use natural light because I don't have the crew or budget to do all this cool ass stuff.

the clt killed it

My preferred way of lighting large spaces (assuming location has large windows) is by setting up something like a 600D Pro outside for each available window - pointed towards its own white bounce with its reflected light going through a white curtain set piece acting as a diffusion. Inside, I like setting up as many practicals (floor lamps, etc.) as the script will allow so I have more options to motivate light on my actors.

@aputurelighting

3 жыл бұрын

That's a great way to go

@braxtonwoullard1188

8 ай бұрын

Interesting 🤔

I love the broken look of windows with blinds and other window shapes. I'd definitely use this idea if the room had windows, either by lighting from the outside or by mimicking the shadows of the blinds. Even when there's no window, I like the idea of some lights lighting just the eyes in some parts of the shot. Something just like what a blind would do in the right position.

Thank you kevin

Going into a large space I would be sure to use the aputure 600d with a lantern and then another 600d through a silk for a key. Then I would place mc’s in the back for back lighting. Amazing video!! I always learn so much!

Lighting, cake, twist at the end, oh, and cake! Excellent breakdown

@aputurelighting

2 жыл бұрын

Glad you enjoyed it!

Another great vid with at least a couple of highly useful tips. Love to see these. I’ve been at this for a while but we can always learn new techniques from each other no matter how long. Since you asked, for a scene like this, I would’ve focused on pulling the overall ambient down. Not only is it ok to lose your character for just a brief moment, but it heightens suspense as well as giving the editor options should evil production forces at work cause you to not have the time to get the perfect oner. Single frame of black in the same place or two can give you the opportunity in edit to comp your single gel, should you feel the beginning of one take was crisper than he end, and the end of another was better…you get my meaning - a while ago I’m sure. So moving from a light pool to another or into even just some motivated moon light edge lighting and not being afraid to be more judicious with the ambient would likely be how I might approach this particular situation - but I pick up me info from every video of yours I’ve seen, so please keep at it. Kudos to the teams involved in putting here together!

The cake is not a lie.

Happy birthday....and thank you very much....

My god this was so interesting.

I was hoping it was the dead end cake haha

Overhead definitely seems to be the move for multiple large spaces

Great educational videos from you guys...Please never stop them coming:) Just wondering what kind of bulb you had in the Flashlight? Did you try to find one that was more accurate in colour temperature?

I’d love to try lighting up a big space with a ton of mirrors like in cartoons!

love this series! I know you guys are teaching lighting but the bad audio is reaaaaallly killing the good vibes. maybe get your Diety buddies to help out or at least level up to 32-bit float to help things out. But thanks for sharing this stuff - learning lots ✌️

Love your content. Sometimes I would love to see some "raw" footage and a real quick overview over the grading. This time the grading to me looks better than some work you did with the Alexa. Keep doing great work! Thank you from Berlin!

Would you still bag the camera when using haze? I've been using haze for years and have never thought to bag my camera setup. So far so good. I can certainly understand chalk particles though.

@harpenfluit

5 ай бұрын

Haze is used all the time on sets and DPs never bag there cameras.

happy birthdayyy

My camera records 8 bit. So with this limited amount of dynamic range and to see details in zone 2 & 3, I bounce light from the ceiling which ups the ambience a bit and also works as a fill .Also bounce off of silver reflector, bead board ,mirror or the likes.

lets gooooo

I will light it from outside and haze the room, and I will have some tube lights on the roof. Also, I might have someone to Hollywood a fill light or a bounce board to the subject

for me i would have done what you did but worked on tubes mostly the same set of lights but most led tubes

Nice

I'd probably just tell the talent to have a lot of really good ideas, 💡 and throw a softbox on that light bulb that pops up. 😉

Concerning safely rigging onto drop ceiling in the future, can you show how to move the panels and look into the ceiling to see where the support wires are? This is the safest way to approach rigging things to drop ceiling, as you want to rig the clamp within 8-12 inches of where that wire support attaches. If there is not a nearby support, you can use your own wire and add another one, and then rig where you wanted to, safely.

Loved the end and all the tricks taught on this, but one thing that really bothered me was the flare on the anamorphic, everytime her lantern flared there was a HUGE white vignette on the corners. Why is that?

@Onyeakak

3 жыл бұрын

@Aaron Beasley Cinematography Exactly what he said. I believe Atlas has an adapter that allows the lens to cover the full frame image. That's what I used on the c500 which eliminates the vignette and gives you full control on how much image loss you want when cropping. That would of helped with this matter, but I'm not sure if they would be compatible with Kowa anamorphic lenses or just the Atlas.

😍😍😍😍

I like using the natural sources of light to justify my lanterns, normaly i use windows as a way of getting shape from the light and with bounce bring up some of the blacks that tend to get lost in camera (this thinking on most DSLR), i like simple difusion because allowme to keep the cuality of the light and throw it further on the space.

i would love to use led palens with a big lantern

The surprise he was talking about on 1:00 is revealed by steady cam operator on 6:09

I would bring more spotlights, in combination with practicals and windows to extend the lights. But it's a pretty broad question, what's the scene? Same as this one but bigger?

For how long did the chalk hang in the air? Like, did you just puff it around and then it worked its magic for an hour or did someone walk just ahead of the camera and add more?

@aputurelighting

3 жыл бұрын

We would puff more chalk in the air before each take.

Great video! How do you call this oversize shower cap? :D Wanna buy some for rain cover.

4:37 and how did you clean studio after you chalked it all, obviously if you are protecting your gear it is pretty bad stuff but what about studio are all people after you have those particles in the air even if they don't want them ?

Like🔥

Could you guys make a video on how to set exposure for night shots? I never understand how to meter a dark shot.

3 жыл бұрын

I'm not that pro, but my answere is make the expo on that you would see. The background sometimes over- or underexposed but the main theme must be visible. And ofcourse depends on the mood.

Lots of lights with each lighting a specific item or space.

a lot of lights, smaller lights for key spaces and have some reflective surfaces to add production value.

For large scenes, I prefer, hard lights bursting though the windows and a haze inside to soften and create shafts of light, I use the Amaran 200d which is a really strong light. Then I add pockets of light using Quasars overhead and practicals. And I also use lantterns t follow the subject around

Did he says Maggart Studios? I’d love to check out the location but I can’t find it!

First, see the natural light in the environment and put the best Aputure lightings in the places where my characters have more volumen. Then I would try to generate the camera movement according the mood of the scene. "Wherever is a light, there will be an Aputure" #TurnTheLightFoward.

@aputurelighting

3 жыл бұрын

Good looks!

Whats the name of the studio? I tried Google it but can't find it.

What kind of flashlight is it?

When's apurtue gonna make an 18k?

Wait… how does bagging the camera not cause it to overheat? Isn’t it just recycling air at that point?

@aputurelighting

2 жыл бұрын

Make sure there's some circulation and to take the bag off between takes!

4 minute (x5) film school

I feel like using the 60d lights against a bounce board is pointless… Couldn’t you just use a flexible LED light panel and put some diffusion over it? I feel like you’d have more control that way and you already have something up there you have to keep out of frame anyways…. Seems like the bounce technique isn’t really the best option there. Am I missing something?

@Onyeakak

3 жыл бұрын

I believe these bounces, the CRLS, don't lose that much of light which is why they are different from a regular bounce board. This is the info I got from the website www.thelightbridge.com/. They look very interesting to use. I'm curious to see how effective they are myself.

I would light a large scene by hiring you. ez

with no budget... i would have a strong guy walk with a boom behind camera.

You know?

Chalkdust Torture. I'm sure the rental house will be thrilled to have their glass returned from a chalk shoot. Sony's going to get 100 returns with chalk in the gears cuz KZreadrs put a Motel 6 Shower Cap on their ZV-1

That guy talks fast lol.

Ya'll should be ashamed by the exclusive amount of WHITE MEN working on your sets

@tylorsweet2972

3 жыл бұрын

AGREE

@angelikabibikova857

3 жыл бұрын

Very very that

Why do so many KZread "DPs" look like homeless people?

I love the broken look of windows with blinds and other window shapes. I'd definitely use this idea if the room had windows, either by lighting from the outside or by mimicking the shadows of the blinds. Even when there's no window, I like the idea of some lights lighting just the eyes in some parts of the shot. Something just like what a blind would do in the right position.