I'm a proud owner of an '06 and I've taken mine through some rough places. it struggles at times but there's no way to beat how roomy they are and how much attention it gets. 😁

@sloburnjo

Жыл бұрын

except for driver's legroom ! i am 6'5" TOO BAD it is tight.

@hermanwhite6549

Жыл бұрын

Where do I send them for the swivel seat bracket

Ok my 03 Element is in need of this, all this and more. Love the lighting you use on your videos so great to see everything you do so clearly! Going to check out your products on line, thanks.

Installed the HRG 1" lift kit with KRB and Swift springs on my 04 Element. Thanks for the video, it was very helpful!

Keep in mind that if you go more than 1.5 in odds are you going to need a subframe drop kit. If not you're going to have all kinds of crazy vibrations from the driveshafts. Especially if you have aftermarket cv's. Also, this is NOT a 2 hour job. Depending on how frozen the bolts are, this can take all day. Especially the rear lower shock bolts. I've done 7 element lifts and the quickest one took 4 hours with two people and a lift. The rear is easier but if you go more than 2 inches, call all the fat people you know. They are going to have to hang on the rear control arms so you can get the struts in.

OMg, im blown away with the knowledge this guy is providing!!!

Man... you're videos are so damn helpful. thank you so much

Love the vid and especially lifted E's. Those tires are BOSS!!!!

Ordered my beast 6” kit for my 06 element yesterday, would love to see a video on it so i know what i’m getting myself into! Very excited

@snicklefritzd3612

2 жыл бұрын

Ben!! Beast kit!! Man, sure would like you to showcase this kit, and the install.

@AlbeeSoaring

Жыл бұрын

Did you end up installing the beast kit on your element? If so did you have to replace the drive shafts?

@paulsoriano6060

4 ай бұрын

Can you send me pics of your element with the 6" lift that's the lift I want on my 08 sc

I have an 03 E with ~330k miles. Looking forward to seeing that 6inch beast kit install vid.

Great video bro....I like the way you expain things in detail! I need to start doing more of that in my videos! LOL

@hrg_tv

2 жыл бұрын

Thanks. I am trying to get better at this!

definitely want to see this on the trails

Thanks for the video! Nice job!

Looking to purchase this lift from you guys. But I would love to see a subrame how to video from you guys. Just so I know what I’m getting myself into. Thank you in advance. Great video !!

Great Demo! Thanks

jr_moto_91 Hrg engine and sub drop (front and rear) Awesome quality, zero complaints. Great set of hardware, everything is labeled correctly, instructions make sense. Highly recommend. Check out the build

Redo on the rear was beyond worthy enough for the like/subscribe

I seen someone on here have a 17 on one plus with a little bump lift on it too, he could put his fist between the tire and the fender. pretty cool stuff! I'd like to put a 400 watt solar panel on the top then a inverter in the back to put a eco flow pro hooked up.

Honda Elements are known to blown out the rear struts prematurely. Especially if you carry a lot of weight in the rear.

I really didn't intend to watch the whole thing, but he's so CUTE i just couldn't help myself. Subscribed :)

This is why I want an element

Ordered mine yesterday for my 2010

How does lifting affect the CV joints over time? Also, thanks for redoing the lost parts of the video.

It would be awesome to see the 6” beast lift!!

@hrg_tv

2 жыл бұрын

We have done several 02-06 CRV beast kits and will be dropping the install video on the E very soon.

I'd like to see what the Element can do on some trails

HECKS YEAH!!!! Super Cool stuff indeed.

Thanks so much for the camber bolt explanation. That really helped me out a lot.

Get yourself a new camera for your KZread vids. I love my GoPro 7 black but use it for outdoor trike vids and road drives. There are othe cameras out there that are tiny and cheep. Learned a bit from. this for sure. Already did the camber upper control arms in the back before I put tires on mine. Have to put front struts on mine and will do FVP ready struts as I get wholesale frome the Zone. I'm a parts guy at a dealership. But I was glad to learn from you that I can get a camber bolt kit for the front. My alignment guy said this Element must have curb checked pretty bad and bent the strut on one side. New ready struts will fix that bent part and the camber bolt kit will dial in my front and rear wheels. I can't stand seeing any car that has the wheels tilted in, especially Elements. Makes me crazy when they aren't straight up and down. Been in the car business for almost 40 years and my father was a mechanical Engineer for Ford on the 60's and 70's. That's where I got involved in all the car stuff. Thanks for the vid. I enjoyed it over a brew and sidecar this evening 10/18/22 before the world ends. =)

How many hours can a professional expect to spend to install the 3" lift? Awesome video!!!!

Great video! You made it look so easy 😅. He mentions shaking while accelerating and my '10 LX is getting that when i hit 3k rpm on the highway. What causes that?

Those tie rods never had castle nuts. Older honda tie rods did tho.

Please take it on the trail. I have an 04

Great content 👌Quebec corrosion would make this a longer video, lol

Good day I would like to see a vid of a full install of a 3inch lift kit on a element do to the kit has a lote of bolt and spacers would like to know where they go thank you have a great day

so no Torqueing any of the bolts requried?

Yo Ben! Cooooooool Shirt!

Does the engine and sub frame drop with the 2in?

Did you do a subframe drop?

What about the front tie rods ? I saw another video where they cut the pinch weld so it would fit right.

Did you use the subframe drop kit as well?

Older vid I know, but was it not considered to include an Sbend type tie rod to help with the extremes angle of the tie rod? Or some type of tie rod spacer?

After I added a lift kit 3in in front and 2in in the back my front right tire shacks a little until I gain speed then it settles. What do I need to purchase from you to eliminate that from happening? Thank you!

what's the tire set up for the crv at 1:38 ?

Will the struts bottom out since you're pushing them down?

Honest question ive put two of these kits on whys it nesscary to put spacers on the carbon filter seems like it wpuld do fine without it.

What type of wheels and tires are these and the tire size?

How much does it cost for a 2” lift on this element?

I want to put some turbo chargers in my 2004 is this feasible and okay for this small engine?

Is there any way to make the car ride like a sedan ?

How can i order just the front spacers for the element 2 inches. I only see you guys sell them as kits. But not the 2 inch spacers

Hi can you help me find shock absorbers for a Honda Crossroad 2008. it's a model sold in japan and europe. they didn't bring it to the US bcuz they didn't want to compete with the element. I can find stabilizer bars and links and tie rod ends but can't find shocks or something compatible. I also want put a lift kit on my own. I also think I can use the same kit u have. I thought i could use the element or crv rear absorber in mine but they are shorter than man by two inches and the bolts on top are about half inch further apart on both sides than mine so they don't line up.

you mention its sits a little lower in the rear prior to the lift. Did you fix that or just ignore it.

Went with KYB struts and Swift springs in the rear,squat is gone.

What would it cost to purchase and have this installed?

No Subframe drop though????

IM free to be a “helper”

Was the Honda Fit lift kit idea scrapped? I don't see the Honda Fit tab on your webpage anymore. My followers and I would like to know. :)

@texomahondaelement3722

Жыл бұрын

Mine too

@HondaFit4Adventure

Жыл бұрын

@@texomahondaelement3722 #LiftTheFit

Looks like Ninth. ....wish ya know he beat so the owner can enjoy their element

Awesome video. With the element 3" and beast 6" lift do you have to change out the drive shafts or can you still keep stock?

@texomahondaelement3722

Жыл бұрын

Great question

@NinthElement

Жыл бұрын

@@texomahondaelement3722 I just had my 2003 Honda Element lifted. Check it out! Cheers!

@NinthElement

Жыл бұрын

I just had my 2003 Honda Element lifted. Check it out! Cheers!

@texomahondaelement3722

Жыл бұрын

@@NinthElement wow. I haven't done my 3" lift yet, i understand its best to drop the motor though

@NinthElement

Жыл бұрын

@@texomahondaelement3722 Texoma, reach out to my guy in Portland to discuss your lift before you do it. he is super knowledgeable and you do not want to mess it up. His details are in my description of "Lifting my Honda Element" video. No shade @HRG TV, just sharing the Honda Element knowledge Bro! Cheers!

Fits for a 2wd?

The lift comes with the subframe kit just so yall know dont order an extra like I did but the cistomer service was on point sent me a label and refunded me. *I didnt open any of the packaging on the return.

Hello . Do you need drop engine or something like that when you fit 2 inch lift kit ?

@NinthElement

Жыл бұрын

Yes, check out my lift. Cheers!

If you have to grab the sway bar end links to tighten them . Then they aren't any good anymore...

How come you never took it off road?

If I buy the kit can I just drop mine off for you to install it? I’m not too far away.

Does this screw up the ride quality by taking away the factory travel range?

@mikej238

Жыл бұрын

" ride quality" 😂 its a Honda Element

Fam if you do this kit go ahead and put in the aerogenics swift springs in the rear when you do it. Thank me later.

On the 1st gen CRV's I know the CV axles will wear out 10x faster if lifted more than an inch and a half. How long do the CV axles last with a 2" lift? Anyone with over 50k miles on one that can report back? All i see are vids of fresh installs.

@hrg_tv

2 жыл бұрын

One of our first Element kits we filmed back in 2017 is still on the same axles. 60k miles later. 3 inch ultimate kit. It's the orange E from one of our really old videos. With that said, in order to gain ground clearance, the axles must be at a greater angle by necessity. This indeed will shorten the life of the axles. This is true whether we're talking about a Ford F150 or a Honda Element. It is a trade-off that not everyone is willing to make.

@texomahondaelement3722

Жыл бұрын

Can you send a link on how the axels wear out?

はじめましてよろしくお願いします 私もｙｈ2に乗ってます ｈｒｇの動画はかなり楽しく拝見させていただいております。

What torques???no big deal lo

Just a tip, you should work more professionally. You are pulling the whole hub trying to get the CVaxle out without having released the caliper and abs wire. You can really damage them easily.

What is your wheel/tire combo. Any recommendations for wheel/tire combo without spacers for 3” kit? I’m looking at the Black Rhino Archers

@NinthElement

Жыл бұрын

Check out mine! Cheers!

@applepoop10

Жыл бұрын

225/75/R16.

That element needs to be preload before tightening those nuts and bolts

Must be a Honda thing. My 01’ civic had the same issue as well.

Yea sure it's much easier with a helper but they drink up all your beer!

'we're not doing dumb stuff - now lets do dumb stuff !👍

HRG lift kit are bàd I installed on my pilot 2015 and bad bad vibrates did everything.. called HRG guy spoke with him and he don't have solution for it

@CHUNIOR05

2 жыл бұрын

Interesting… I had a similar experience on my element but with aerogenics… and since then I recommended ppl to HRG

@nobodynoone2500

2 жыл бұрын

Any lift will put more stress on your cv axles. I hear the NAPA axles are a tad longer and can sometimes help. Otherwise look up subframe drops to correct your CV angle.

@hrg_tv

2 жыл бұрын

darel we both know that's not true. Do you even have an HRG kit? our records (going back to 2018) show you have never bought anything from us. If you did call, with or without an HRG kit, this is what I would have told you: Check your tires to be sure they're not out of balance wheel alignment matters solution 1 subframe kit solution 2 new axles solution 3 take the lift kit off These are standard answers that I tell everyone who has the axle vibe. Good luck and I hope you get your Pilot sorted out.

@texomahondaelement3722

Жыл бұрын

Isnt the pilot the same chassis same as Elements?

@chuckb9867

Жыл бұрын

@@hrg_tv I don't see a 2-in lift kit for sale 1.5 in or 3 in low 2-in lift kits am I missing something

why would you offer 6 inch lift element buy not pilots wich sell 10x more 🤦🏽‍♂️. sorry thats mad annoying

@hrg_tv

2 жыл бұрын

Pilots sell more because the Element has been out of production for 11 years. Besides that, there are major and I do mean major, hurdles to lifting a Pilot more than 3 inches. The Element lends itself to being lifted much more easily. Keep an eye out in the coming weeks for the 6 inch kit install video, and I'll go into detail as to why.

@texomahondaelement3722

Жыл бұрын

Tell me more

As a Honda Element owner, the element is not an off road vehicle. Mine is an AWD car. The Honda manual plainly states that it is not an off road vehicle. Proceed at your own risk.

I was considering this product but after watching this video I will absolutely take my business else where. For starters you re-used a cotter pin. absolute no no especially for the dollar or less cost on one. Second not properly torqueing to spec with a proper calibrated torque wrench potentially causing early wear and possible damage to the other already clearly well used suspension components. Oh yea and not to mention using power tools to draw in the part with the nut/bolt. Great way to cross thread and damage a pretty crucial components of a safe riding vehicle. This just shows the lack of care attention to detail and professionalism lets me know what kind of quality these parts will end up being. Thanks but no thanks.

How much does this lift kit cost?

Please take it on the trail. I have an 08