Love this!! I'm so in love with the puff, I'm starting to collect most of the colors. Thank you very much Corinne!!! 💙💙💙💙💙💙

Cute

Thank you for this tutorial video Corinne. Can I press the puff vinyl with a Cricut Easy Press 2 as I don’t own a heat press? Thanks! 🌸

@CorinneBlackstone

Жыл бұрын

You sure can!

I really enjoyed your video. I loved the way the project turned out especially that puff. I tried using it for a T-shirt for my granddaughters for Christmas but I put the glossy side down and it didn't turn out right. When using puff do you need to put more pressure when cutting the image. I'm going to try it again after looking at your video.

@CorinneBlackstone

7 ай бұрын

No I cut puff on the everyday iron on setting. Make sure you check which side is the actual htv shiny side down is not correct for htv anymore it should be carrier sheet side dowb

Thank you cant wait till I can order it ;) Can we order a bundle of all colours ?

@CorinneBlackstone

Жыл бұрын

They don’t sell a bundle but you can of course add them all to your cart

Oh my god!!! I love Harry potter ( I'm in my 30s so it was my childhood ) And I LOVE ELF I'm obsessed with the elf movie I way cry in the ending and I can watch it at least 4 times over Christmas!!!! I had to pause you video to comment lol. I just saw one of your svg is voldemort dressed as Elf??? Nooooò!! What did u do????

@CorinneBlackstone

Жыл бұрын

Hahaha he was a funny mashup design from twiddy designs and I was cracking up over him!

Do you have instructions on cut settings for silhouette as well?

@CorinneBlackstone

Жыл бұрын

You can find silhouette cut settings here www.143vinyl.com/material-cutter-settings-document.html?partner=196113

Is there a way to fix or prevent the bubble issue? Really awesome effect, will have to get some for holiday projects.

@CorinneBlackstone

Жыл бұрын

Make sure you have the htv fully on the pressing pillow. That’s why mine bubbled

@riggsvsoliver

7 күн бұрын

Another few tips if it bubbles - Moisture is your enemy with puff, so when you plan on using puff, it’s generally good practice to prepress for 40 seconds to ensure it’s super dry PRESSURE IS EVERYTHING, it you’re pressing too hard or too light, it’ll do that ugly wrinkle too

great content, how many washes can it handle before it cracks?

@CorinneBlackstone

Жыл бұрын

So far I have a shirt I’ve washed mine 9 times zero cracks

@patrickselala5614

Жыл бұрын

@@CorinneBlackstone that's Great gonna try that

I enjoyed your.video. I was wondering what is the difference between 3D Puff, Easy Puff Htv and Stripflock? Please help me

@CorinneBlackstone

Жыл бұрын

Strip flock is soft like fleece not puffy but slightly raised. 3D puff requires two pressings and only comes in black and white and easy puff is a one press multi colored option

@yolandabranner6200

Жыл бұрын

@@CorinneBlackstone thank you for replying back

@sebas-hm2ju

Жыл бұрын

Where to order 3d puff HTV and also can I cut it out with my silhouette and which setting. That would help me.

Can you use anything other than this big press to press puff vinyl? I don’t have space in my house for a press like this!

@CorinneBlackstone

11 ай бұрын

It’s not recommended. Puff needs even firm pressure which things like an easy press or home iron can’t give

Does not doing a full press at the recommended temp for the EasyWeed affect the life of it? (I'm referring to tacking down the EasyWeed at 305 but then lowering the temp to do the puff, so the EasyWeed doesn't get a full press time at the 305).

@CorinneBlackstone

Жыл бұрын

No it doesn’t

@stephanier9054

Жыл бұрын

@@CorinneBlackstone Thank you!

I'm new to cricut qnd had been using cricut only materials. I've just bought siser easyweed online and I've never used it, I bought htv. Is siser better than cricut?

@CorinneBlackstone

Жыл бұрын

Literally anything for the most part is better than Cricut. I find the Cricut vinyl and HTV to be difficult to work with and not as high quality as it should be. I recommend Siser, Starcraft and Styletech most but I also love Teckwrap

Is there a way to lay easypuff yellow inside of easypuff red and press both with no gaps in between them? I’m trying to make a flame but I know you can only press the puff once. Thx!

@CorinneBlackstone

10 ай бұрын

Slice the smaller from the larger. Remove the smaller from the carrier sheet and place it on to the larger carrier sheet

@CorinneBlackstone

10 ай бұрын

This video shows the concept kzread.info/dash/bejne/moSDtJNyfbmsiLw.htmlsi=SR5Q_wiugGgAp-BS

@FeelgoodThreads

10 ай бұрын

@@CorinneBlackstone got it! So the easy puff won’t warp when you peel it off? Because that glitter looks pretty solid. Thx for the quick reply!

@CorinneBlackstone

10 ай бұрын

@@FeelgoodThreads nope it shouldn’t just go slow

Hello, What setting are you using for the Siser Easy Puff? I had a hard time cutting it. When I used cardstock light, it cut out the vinyl completely

@CorinneBlackstone

11 ай бұрын

Everyday iron on

@getitboont

11 ай бұрын

@@CorinneBlackstone I used that and it didn’t work but I’ll give it another try

@getitboont

11 ай бұрын

@@CorinneBlackstone thank you

Does anyone know to tell puff vinyl from iron iron..mine not labelled so HELPPPP

@CorinneBlackstone

11 ай бұрын

There isn’t a good way to tell. I would cut off a small corner and press it and see if it puffs

i absolutely CANNOT stand to waste so much vinyl!!! If I do a 2 color design, i always try to make 2 totes, or tees or whatever. (3 Colors=maybe 3 totes) I cut the entire design out of each color. Then I simply reverse the design colors on the 2nd item. This way I am not wasting all those large areas of uncut HTV.