That exhaust sounds freaking awesome! Some people commented that it's not loud? Love the low deep tone personally.

Damn man that exhaust looks great and your car sounds awesome

Sounds awesome

Damn my fbody looks like it’s been through the ocean underneath and his is just mint

@clutchergarage

3 жыл бұрын

Perks of living in the south man lol

Does someone know if this exhaust differs in tone compared with the tsp true duals out the back?

🔥

What’s all done to the motor is there a cam in it as well besides a exhaust

Sik as car men badass sound to it as well what cam are u running if u dnt mind me asking

Nice you also have the infinity tailights. I made some for my Trans am

It has the CME valance, I would love to see the exhaust with CME tips on. Sounds perfect!

@clutchergarage

3 жыл бұрын

It’s in the works!

@chevy19699

11 ай бұрын

​@@clutchergarageever got the cme set up with this exhaust?

What cam was in it at the time this vid was shot?

Can u build me a set of pipes like that, I have 99 fire bird trans am I'm trying to do like that.

Just recently purchased a 02 firebird trans am and I’m trying to upgrade my exhaust. Can I get the specs on yours. Also I’m from Mississippi as well and I travel to the Jackson area a lot. Hopefully we can connect and you could help me get my fbody right

Where’d you get your taillights from??

What sway bar and trac bar kit do you have

Love the sound!! I have a 2000 Z28 . What tail lights are those?

@clutchergarage

3 жыл бұрын

They are custom made. I’m thinking about trading them for some oems that are in good condition

What cam?

Did you mod your tail lights?

Whats size are the headers 1¾ or ⅞

I have the same exhaust and I'm having clearance issues after it passes over the axle and over the PHB relocation kit. It still doesn't have enough clearance and I've adjusted it about 5 times. It rattles like crazy off the PHB relocation bar.

@joshjernigan3595

9 ай бұрын

The bar that comes with it kinda sucks for clearance. The umi brand relocation bars works better

@vincentmirdala6536

5 ай бұрын

What exhaust is this?

Is that a cammed ls1???😮

Did you take the heat shield off above the axle I can’t see in the video looks like you have the gas tank one still

@tylerdirden3416

Ай бұрын

Do you have to pull the heat shield off?

I noticed non-OEM rear springs. Is the car lowered? If so, how much?

@clutchergarage

3 жыл бұрын

Inch an a quarter

Cool vid. I’m in Tupelo, MS

@clutchergarage

3 жыл бұрын

Cool deal man! Hattiesburg

@badas95Z

2 жыл бұрын

@@clutchergarage I’m up the highway from you, nice sounding car! Is it loud enough to have problems with the law?

@clutchergarage

2 жыл бұрын

@@badas95Z I haven’t had any issues so far. It’s loud but nothing terrible

@badas95Z

2 жыл бұрын

@@clutchergarage is yours a auto or manual?

What motor /cam 😳

Damn that sounds sweet, Does it sit real low? I'm thinking of getting this exhaust.My car isn't lowered.

@clutchergarage

3 жыл бұрын

Yes it’s low but my car is also lowered so I imagine it’ll do even better on yours.

@alexandermcdole8464

3 жыл бұрын

@@clutchergarage Thanks for the info

did you use the stock clamps it came with? i read they were not that good and if you changed clamps which ones did you go with?

@clutchergarage

3 жыл бұрын

I did at first but yeah they’re trash. Definitely upgrade them. I got the clamps from O’reillys bc they are ten times better. They have two bolts on them and help seal exhaust leaks a lot better

@t0mmyxgunn

3 жыл бұрын

@@clutchergarage thanks for the info

@flexo.__

2 жыл бұрын

@@clutchergarage Have A Link To Those Clamps ?

I'll ask Incase anyone knows, does the differing exhaust lengths matter when it comes to power? I would think that each side of the headers would need an equal length of exhaust piping to run efficiently. Or I could be wrong and the extra exhaust piping on the left side doesn't impact anything if anyone knows the answer that would be cool.

@clutchergarage

2 жыл бұрын

Nah man. If it makes a difference at all, it isn’t enough to even notice a slight difference in power. But good question

@_wenjo

2 жыл бұрын

@@clutchergarage thanks man, That was the one thing I was never able to get an answer on.

@clutchergarage

2 жыл бұрын

@@_wenjo no problem at all

@swappedoutZ71

2 жыл бұрын

@@_wenjo this is what the x pipe is for. The x pipe helps to balance flow between the two pipes. H pipe can serve a similar purpose as well but it provides a different sound than an x. You can also have a double x pipe

Headers ?

Hello! Question….debating on getting true duals, but how bad is the exhaust smell inside the car w/o cats?

@brianaholmes2178

Жыл бұрын

Inside ain’t bad I drive a truck with no cats and down turns before the axle its only bad when you idling and just sitting there and the wind blows it but when your drivin you won’t notice it just everyone else

@jamess.7415

Жыл бұрын

Appreciate it

Where is your shop located

How exactly did you mount that hanger by the drive shaft cause I'm missing that part from my kit???

@angel1320.

3 жыл бұрын

Or was that custom?

@clutchergarage

3 жыл бұрын

It comes with the kit. You have to go inside the car and pull up the seat and undo the seatbelt lock and use the bolt and hanger provided

@angel1320.

3 жыл бұрын

@@clutchergarage thanks for responding, guess I'm giving TSP a call

@clutchergarage

3 жыл бұрын

@@angel1320. this is the speed engineering kit so it may be a tad different. I’d call customer service and ask about it.

Sounds killer. Much better than the y pipe setup. Do you plan to run a cme?

@clutchergarage

3 жыл бұрын

Yes I do. Prolly gonna run it like a corvette with quad tips instead of the factory cme tips. I’ll have to try it out. If I don’t like it, I’ll change it back

@bhcamaro2002

3 жыл бұрын

Check out Google ls1tech couple people have done it before. I'd recommend the 3inch cme I have if you can find them

Which Panhard bar relocation are you using

@clutchergarage

3 жыл бұрын

Speed engineering

Where did you get that exhaust Kit?..Did you make it yourself!?

@clutchergarage

3 жыл бұрын

www.speed-engineering.com/shop-by-vehicle/1998-02-camaro-firebird/exhaust/true-dual-exhaust-kits/ls1-camaro-firebird-true-dual-exhaust-rear-exit.html

Work torque arm is that you are using?

@dustinwalker9368

Жыл бұрын

Umi

Great set up but i think those bullet mufflers are taking away from the sound . it doesn't sound very loud at all

@trevonwilson1

3 жыл бұрын

That's funny because i was thinking the same thing. Why isn't it loud? 🤔

@clutchergarage

2 жыл бұрын

I promise you man it’s loud. Video doesn’t do justice

Can. You put cutouts on the x pipe ?

@clutchergarage

2 жыл бұрын

Prolly could. Really need a good exhaust guy. More than likely would be a pain in the tail. Lol

@derekwhite6135

2 жыл бұрын

@@clutchergarage oh Yeahh looks like it would may do that eventually later on just looking get true true dual x pipe set up curently have excel rock header stock cat back setup with btr stage4 cam defently needs a good exhaust set up needs gears with this cam

Tail lights? Where can I get them?

@clutchergarage

10 ай бұрын

Smokey Customs built mine! He’s on instagram!

What exhaust kit was this? Texas speed?

@clutchergarage

2 жыл бұрын

Link in description

Isn't he rear bumper aftermarket?

@clutchergarage

2 жыл бұрын

Nah it’s factory only on slp models

I bet if you replace those bullet mufflers with just a three inch pipe your car would be alot louder 👌

@clutchergarage

3 жыл бұрын

I honestly about being loud. Just wanted a clean tone. I’m more than likely going to change from this setup. It scrapes on everything

@howardthedon9310

Жыл бұрын

@@clutchergarage can I run this same setup on an 83 third gen Camaro ?

@somebody2409

11 ай бұрын

​@@howardthedon9310 No

Is this speed engineering true duals? How much is your car lowered and how much ground clearance do you have?

@clutchergarage

3 жыл бұрын

1 1/2 inches and honestly maybe 5 inches. It isn’t much at all. I’m going to try and tuck it up higher but I haven’t had time here lately

@austinma62

3 жыл бұрын

@@clutchergarage thanks for responding. Would you recommend it?