I wish they had a demo video comparing lap times and slalom maneuvering as well as a g force test.

if Sam Strano says It Rocks, then It Rocks! cause when it comes to suspension, Sam Strano is the MAN! ...hes won so flippin many trophies, numerous awards, & has built, designed, & drove more 4th gen f-bodies than anybody else i, & probaly u, know. hes probably forgotten more about f-body suspensions than the rest of us will ever know or learn. & he has his own "mom & pops" (& i say that as a compliment, because as a small buisnessman, i always try to support small buisnesses whenever possible) suspension buisness. & hes a great guy to do buisness with. i discovered him thru the LS1Tech forums & hes a super cool dude & is always willing to help a fellow gearhead! sounds like a great partnership with 2 powerhouses... & on that note, a sincere thanx to sam & umi for all the parts, advice, & help with building my 98 formula!

I absolutely love their products! I cannot wait to get my new torque arm.

I wish I worked for UMI. I have so many ideas

I have your panhard bar,lca's, sfc's and your adjustable torque arm on my 95 Z28 Camaro! It handles much better than stock. Going to get your sway bar kit next. 👍💪💪💪

@aldo5658

3 жыл бұрын

I just installed panhard bar, LCA and sway bars. Haven't driven it due to work and can't wait too. So I haven't compare before and after yet. Just need SFC and torque arm

@Wsssi6

Ай бұрын

How did it drive?

I was just looking on the website and the Corner Max Kit does not list the rear suspension parts as part of its kit. Did you guys change the kit layout?

Is the box control arm stronger than the tubular design?

Hello! Very nice you Camaro! what size tires do you use and what brand are your wheels?

I can only imagine this kit probably costs more than these cars are worth

@jakelucid9650

3 жыл бұрын

im satisfied my 1995 z28 convertible 6speed, which i bought for 8k with 63000 miles, and 5000 into parts LE2 heads and cam and suspension upgrade - so 13k....will keep up with and even out run most cars that can be bought now for 2-3x as much as i have into my camaro....cheaper car maybe....leaves more room in the budget to work up the LT1. only thing out of my reach at 400~hp are the top tier new camaros and mopars. everything else in the line up is fair game. so...i guess it depends on your outlook. pay 35000 for a newer camaro...or 15000 to eat new camaro :)

@bpebler

2 жыл бұрын

It’s just shy of 4k, not a bad price at all. You could dump just 8-10k into a 4th gen and make it perform better than a modern day diva muscle car. Then turn around and sell it for 30+K depending on many other factors. But as far as “worth” is considered, you’d make money instead of lose it. Plus, there’s a video of a TA with a setup like this totally dusting a top of line 100+k Porsche in a road race. 😉

@Ballen1182

3 ай бұрын

Not anymore 😄

Website says 98 to 02, does the kit fit 93 to 97 as well ?

Is the roll cage necessary? Is it possible to substitute it with just a roll bar?

Will the kit work in a drag racing daily driving application

Okay I got a '94 Z28 that I'm using a BMRK member my question is can I use my stock A arms on that tubular BMRK member?

Anything for a 3rd gen Camaro?

Install videos please.

Everything is rusted to crap on my 4th gen Camaro. I would really like to know how much this whole set costs and if I can do it without modifying cutting the original components that are left behind. Also, does someone have an instructional video on how to install the aetup?

@davidbiles1236

3 жыл бұрын

Me to

@aldo5658

3 жыл бұрын

Sams here, but I just looked up f body (insert suspension part) installed and it's pretty straight forward

How about sending us this kit for our Lemons/champcar race car? We'll plaster Umi on every inch of the car!

Looks like a sweet setup!!

@pistoncount

4 жыл бұрын

Went to your site.....looks like it has to be pieced together....do you have a kit ?

Unfortunately, the stock size clamshell motor mounts are resting on the k member gusset on my build. I even got new mounts to avoid the possibility of something like this. Real shame, its a nice piece otherwise. I now have to convince the shop that is helping me with the install that this is something that requires attention. They weren't willing to take my suggestion that we take everything back out and grind something to make these clear, but we have to do something, not real interested in proceeding with this build with metal on metal contact in the motor mounts.

you have install vids

I ordered your front sway bar kit for my 95 Z28 Camaro from Summit Racing. I heard you were way behind on your orders. 😐

What's the wheel and tire setup on the 4th gen behind you? It looks perfect 👌

@umiperformance

3 жыл бұрын

Sorry for the delay. 315/30-18 tires on 18x11 wheels. +35mm offset.

Have you guys considered making new uprights with dual tie rod holes for more steering ackerman / drift capable? Could even incorperate C7 Vette Caliper spacing for 18" and up wheel sizes as an option as well as the stronger Corvette hubs. Ive gone through a few sets of Timken hubs on my 1LE.

@CamaroRick

5 жыл бұрын

@ Thanks for the reply. I never would have thought they would come apart like that. I got adapter plates to mount C5/6 SKF hubs. I did hear about the hoosiers as well as the coleman ones. I dont think the hoosierPE ones are available right now.

5 жыл бұрын

@Camaro Rick...Brad here again I was thinking about you the other day, did my first track day weekend over memorial weekend, before it was over both of the HPE hubs broke, and you are correct they seem to be out of business, just installed the SKF and adaptor setup you spoke of, God I hope this cures this problem, 2,600 bucks into two sets of wheel bearings plus going through two or three sets a year for the last 26 years, tens of thousands of dollars, shit I better stop thinking about this, I'm just glad you didn't get the Hoosiers, good luck, lets hope for the best

@CamaroRick

5 жыл бұрын

@ Sounds like your gonna put them through their paces. Good luck man! Yea I try not to think about that either. If your not breaking stuff your not having enough fun with it! What size tires are you running on the front?

@mikecastleberry9671

4 жыл бұрын

Cost more than the cars worth

@noahwalton9811

6 ай бұрын

I think that's kind of the point. why bang up an expensive car drifting when there's thousands of f bodies@@mikecastleberry9671

I'm looking for a street racing and no-prep setup. 99 f body firebird

@umiperformance

Жыл бұрын

Hi MetalWorks. Sorry for the delay. Hit me at ramey at umiperformance dot com and I can work with you on a no prep quote.

Is there a such thing as a after market angle kit for f body’s ?

@umiperformance

2 жыл бұрын

Hi Austin. For drifting you mean? If so, maybe but we don't make one yet.

Is their a kit for the 3rd camaro?

@umiperformance

3 жыл бұрын

Hi Michael. Thanks for the question. We don't have a full kit with a single part number but we are happy to build a kit for you. Just hit us at support@umiperformance.com with your request. Include p/n's, color choice, name address phone, etc. and we can hit it pretty close. Also, let us know how you plan to use your car. Thanks!

What size tires are you running on the camaro, and what did you have to do to the front end for the wide tires

@THANOSTHEEXPLORER

5 жыл бұрын

The car can fit a 315 In the front with no mods.

@heavychevy383

4 жыл бұрын

...315's?!?!? ...square?!? ...ok...im officially drooling!!!

How much for the full kit

@umiperformance

4 жыл бұрын

Hi Sawyer. Email sales@umiperformance.com for a quote and links.

What rims were those in the video?

@umiperformance

Жыл бұрын

Forgestar F14 18 x 11. Not sure of backspace. We buy them from stranoparts dot com

Donate some of them parts and I’ll put a big UMI decal on my WS.6

@slowpoke96Z28

3 жыл бұрын

Right??

Will it work on a 94 convertible?

@umiperformance

2 жыл бұрын

Yessir. Give us a shout at support@umiperformance.com to order or get tech info.

G numbers??

@umiperformance

3 жыл бұрын

We've seen 1.5 on telemetry but haven't really published numbers as there are so many variables.

If I only had 6 grand laying around to buy all this

Great video! I'm seriously looking into this kit for my fbody! Subscribed! Check me out!

Over $3,000 for this system wow

@garyking9496

4 жыл бұрын

This kit is over $3000 ?

@adamweaver6351

4 жыл бұрын

Most of these cars arent worth 3000 with a built motor. Just get the 150 dollar rear control arms and panhard bar like me haha.

@aldo5658

3 жыл бұрын

😲🥺😭

Drop the music in the background. Annoying. Good info on suspension.

Would like to hear you talk not music noise.

@umiperformance

3 жыл бұрын

We are working on improving future videos. Thanks for the feedback.

nice set up.to bad you ruined that SS without modern dogshit wheels and headlights housings

Lose the music, it's annoying AF.