That 70's pmusic really sets the tone.

I wish I had watched this video before I put the washer on the pedestal.

This music is glorious.

Your video and list of tools had me confused...maybe it's the language lol The first bullet needs to remove the "1".... in the video and above. It described using an open ended wrench to tighten the feet but used what I would call box wrench but it definitely wasn't an open ended wrench. All that trivial stuff aside, a very helpful video. I want to remove the pedestal before my installers get rid of my Duets.

the hinges on my pedestal are totally messed up making opening and closing the drawer nearly impossible. I wish they had showed how to attach the hinge to the back of the drawer unit. Also, how to get the ball bearings lined up correctly.

Tendrán algún video de cómo convertir la Secadora de gas natural a gas LP?

I thought tipping the washer machine over will cause the strings of the drum to fall loose

Hi so I purchased my pedestals used from an individual and the screws to install it to the washer and dryer did not come with it. What size screws and what kind of screws would I need?

@whirlpoolcanada

Жыл бұрын

Hello, Genna. What is the model number of your pedestals? We would be more than happy to look into this for you. Thanks! ~Holly

Do you have a video showing how to convert from natural gas to propane?

@whirlpoolcanada

Жыл бұрын

Hi, Jose! Thank you for reaching out to us. We do not have video. Please refer to a certified technician to perform the conversion. Regards, -Eric

If manufacturer would cut a large circle in the top of the drawer unit, one could remove the drawer, and slide under and make simple repairs.

I purchased my washer and pedestal separately. What and what do I need to install it?

@whirlpoolcanada

4 жыл бұрын

Hey Aturu! All parts should be provided with the purchase of your pedestal. If you have any additional questions please let us know. Thank you -Cody

No mention of transport bolts...

I have a duet whirlpool older model. Lost the screws to install the pedestal. What type if screws are needed

@whirlpoolcanada

4 жыл бұрын

Hi Marly! We are so sorry to hear this. We are here to help! Please email us with your model and serial number so that we can get the most accurate information for your unit. We do also ask that you provide your youtube handle in your email as well. Our email address is canadasocial@whirlpool.com. We look forward to hearing from you! -Jenni

@wadebentlie9045

2 жыл бұрын

@@whirlpoolcanada er

Do the shipping bolts need to be in place when you lay it on it's side? What if I don't have the shipping bolts?

@犬用下着ソース入り消臭剤

3 жыл бұрын

THE DEUM WILL SHAKE. IT WILL MAYBE DAMAGE ITSELF

With my permission, I use your video for my site

How and where can I order the support pads for the washer? Do I even need them when I put the pedestal on ?

@whirlpoolcanada

4 жыл бұрын

Hello Charles! The black rubber support pads should have been provided with your purchase of the new pedestal. If for some reason these were not received please send us an email to canadasocial@Whirlpool.com. Please include your best contact number and the model number of your pedestal. Thank you -Cody

Cheap and overpriced...still bought one lol 👍

What type of screws are those ?

@whirlpoolcanada

4 жыл бұрын

Hi, Crispierjmoney1! For more information on your model, please visit our Whirlpool parts website support.whr.pl/f3sGwH. Thank you so much! -Kelcey

@leonaking5387

4 жыл бұрын

@@whirlpoolcanada ⁰fbdhdygdd

That was the closed end not open end of the wrench

Terrible instructions for top load.washer for someone who had.old machine and how much liquid he to use . No booklet just a.cheap quality paper