Did you find this video helpful with your installation process? I am not an armorer or gunsmith but I felt pretty comfortable doing this project myself. If I did anything wrong, any suggestions or advice is well received. Here is an interesting article about the service life of AR-15's and their components: bravocompanyusa.com/content/Filthy%2014%20bravo_swat_10.pdf Also, videos like this are not monetized due to guidelines. If you want to support this channel directly, feel free to hit the Thanks button above or consider joining my SubscribeStar page here: www.subscribestar.com/magic-prepper

@joeoliveira9745

4 ай бұрын

Need a link to the video where the rifle fails brand new,please

@LovesM855A1

4 ай бұрын

Its helpful but wrong, with those springs you either use the inner rubber or doughnut but not both!

@MagicPrepper

4 ай бұрын

@Badass5.0yote556 it's my understanding that it's supposed to be both. Which is why the extractor I replaced also had both.

@vashstampede5774

4 ай бұрын

I've been using AR-15s for years and didn't even know this was an option until you pointed it out, thanks a bunch as always Magic!

@LovesM855A1

4 ай бұрын

@@MagicPrepper No check into it, Sprinco and all will tell you WITHOUT a high pressure spring sure use both, but high strength its a no no

If you own an AR you need to know how to work on these parts, Gets spare parts, they do break. Videos like this are invaluable. Get some good quality tools, you will not regret it.

To anybody that has problem re-installing the pin---A standarp pipe clamp will make the pin slide right in easy!

It really was a good video. Having these parts on hand is very important. In last video, you could actually tell a difference as the bolt carriers were being retracted, the original had a substantial drag sound versus the BCM bolt.

@MagicPrepper

4 ай бұрын

Substantial difference for sure!

Had to use this kit on an aderson bolt a few years back. The extractor sheered off after a couple rounds while sighting it in.

@MagicPrepper

4 ай бұрын

How is it holding up?

@kj8756

4 ай бұрын

@@MagicPrepper that bolt hasn't had any issues since.

Great video! Perhaps you could do a similar video on changing the Ejector pin, spring and plunger. This is what I would call a "practical video" because it teaches you something you can actually apply in real life. Thank you, Magic.

Saved the video for future reference. Thank you

@MagicPrepper

4 ай бұрын

Thank you as well!

going to grab a couple to have in the parts bag. Thank you.

Thanks for the info.

Good refresher

gotta have my walmart glasses for that. You need a plastic pecker for that pin. sorry couldn't resist...lol

Never use the plastic insert and the rubber O-ring together..Dump the rubber O-ring, it is not needed..It fact it will over tension the extractor which caused your extraction and ejection problems on your rifle from the last video..Get a Springco 5 coil extractor spring and use the plastic insert if you want the best upgrade..It should last the life of your barrel..O-rings are used with inferior springs..If the carrier passed the gas ring test, then there was no need to replace them..It is pointless to try and keep the gas rings gaps from lining up..They move around all the time and if your rifle fails because they were lined up then your rifle has other problems..

@MagicPrepper

4 ай бұрын

So I checked with those who know more than I and I was told that with this particular kit you are indeed supposed to install the insert and the o-ring together.

@hairydogstail

4 ай бұрын

You need to talk to better people..The rubber O-ring was part of the SOPMOD groups upgrade they made when Colt had some M4's that had improper chrome chambers causing malfunctions..The rubber O-ring is used in cheaper bolts with inferior extractor springs..If you ever received a new BCM BCG, you will notice they leave the rubber O-ring out of it for a reason..kzread.info/dash/bejne/kWGXpNmliMXSnc4.htmlsi=lSFC4DrcNotdNirR&t=665@@MagicPrepper

@hairydogstail

4 ай бұрын

kzread.info/dash/bejne/loSurdZyZ7fQlso.htmlsi=6_Z5LieCpBxoF3ec&t=292@@MagicPrepper

@hairydogstail

4 ай бұрын

Your welcome..@@MagicPrepper

Good job

Small tip for the content, Thanks!

@MagicPrepper

4 ай бұрын

Thank you!

Very helpful

@MagicPrepper

4 ай бұрын

I figured, why not?

With those heavy duty springs you don’t use both the doughnut and center rubber, you pick one or the other…… both are to much

@copshelpamericans.period.1712

4 ай бұрын

The system as developed by Crane required both. The spring guide prevents kink in the top coil, while the donut extends spring consistency over the life of the part to prevent declining pressure of lifespan.

Back ground music sounds like porn music.

@MagicPrepper

4 ай бұрын

You would know 😉

@jerold8908

4 ай бұрын

Commonly called Gun porn LOL

Good video thanks for sharing YAH bless !

Bro love you and your videos......but that hanky music😮🧐

Are you more likely to break an extractor with all 3 parts instead of just say an upgraded spring ? Thanks for the vid.

In my opinion, it looks to be more of a replacement kit instead of upgrade kit. Nothing substantially that different to justify changing out unless there are defects in the current parts.

@msquared9605

4 ай бұрын

Except for the extractor spring. That’s a huge upgrade in this kit

Iv got a like new bcg from RTB. First it has issue extracting steel case. Installed a BCM extractor spring kit. After that seemed to fix that issue. Now I noticed some malfunctioning where I get extraction but no ejecting causing a major malfunction!!! Wtf Some was steel case. Tan some brass Did it on the first round then didn’t at all till last round So the spent shell stays in the extractor Any ideas !? Im thinking maybe the extractor could have a problem or a gas issue ? Idk. It’s a midlength gas 16 inch. Carbine bufffer. Standard stuff never had this many problems

Should showed this to Reno May on his Bear Creek uppers. 😂

@MagicPrepper

4 ай бұрын

Bruh haha

"You could have just boughten..."..."boughten..." LOL

@MagicPrepper

4 ай бұрын

I just say words sometimes.

Can you do a video on all the tools you use to build parts kits? A lot of people who would love to build kits themselves don't because they dont know what all they'd need to buy other than the rifle's parts themselves.

@MagicPrepper

4 ай бұрын

So I have a video like that already actually. I'll post a link.

@MagicPrepper

4 ай бұрын

kzread.info/dash/bejne/ZIdn1rCspKmYYKg.htmlsi=78kEinFoTCZewBzK

@warlordjjj2111

4 ай бұрын

@MagicPrepper oh thanks I didn't see it when looking through you're videos

Did you ever figure out what was wrong with your budget bcg?

@kevinhullinger8743

4 ай бұрын

He needs to send the BCG to “school of American rifle” for an autopsy. Its a great channel

Wow 😂

Lots of bots today!! 🤖👙

@MagicPrepper

4 ай бұрын

For real

No ads. I wonder what that means. 😅😂😅😂

First to like and comment. My reward is a big chocolate chip cookie...lol😊

@majesticlion5598

4 ай бұрын

🍪 here ya go!!

Pepe la PEW. I’m a dork for this comment

@MagicPrepper

4 ай бұрын

I'll allow it

Should have got the Smith and Wesson M&P instead. You wouldn't have that problem

you didn't even needed a punch you could have used the firing pin, that make me think you never served in the military, plus your firing pin is dirty..

First lol

Bub...you do too much gun fondling. Tell Midway to start making good quality powdered eggs at a great price. All the powdered eggs have skyrocketed in cost. Nothing affordable. Back in the day, 1990s, Midway always had stupendous deals. Then they got greedy and all that was gone. Tell Midway to go back to its roots.

@MagicPrepper

4 ай бұрын

*not enough

@Imtheeyeti

4 ай бұрын

@@MagicPreppergrammar nazi

@HC-qc5rp

4 ай бұрын

Everything’s more expensive one way or another. I don’t know how much of this is Midway’s fault.

@TacticalRabbit42

4 ай бұрын

Everything is more expensive. How are you going to make more affordable powder eggs after Western government spent years culling millions of them at a time? Personally I'd just get some chickens of my own if you can

@texasfrontiersman8245

4 ай бұрын

Lol fat finger syndrome...