hi every time I write "brew install cmake protobuf rust python@3.10 git wget" on the terminal it says "command not found" I'm blocked I can not install stable diffusion.

@LaCarnevali

Жыл бұрын

Hey, I assume you installed Homebrew. If so, it can be that Homebrew was installed in another directory - you can check that when you run the Homebrew installation on your terminal. In my case, Homebrew was installed into /opt/homebrew: " ==> This script will install: /opt/homebrew/bin/brew /opt/homebrew/share/doc/homebrew /opt/homebrew/share/man/man1/brew.1 /opt/homebrew/share/zsh/site-functions/_brew " If you get another directory, you have to run brew from its origin. For macOS Intel, the directory is /usr/local, so in that case, you should run the below: /usr/local/bin/brew install cmake protobuf rust python@3.10 git wget Then follow NEXT STEPS shown on command line, it should show something like this ==> Next steps: - Add Homebrew to your PATH in /Users/$USER/.zprofile: echo 'eval $(/opt/homebrew/bin/brew shellenv)' >> /Users/$USER/.zprofile eval $(/opt/homebrew/bin/brew shellenv) Copy and paste the first line on the same terminal window, then hit enter echo 'eval $(/opt/homebrew/bin/brew shellenv)' >> /Users/$USER/.zprofile Then Copy and paste the last line on the same terminal window, then hit enter eval $(/opt/homebrew/bin/brew shellenv) Finally you should be able to use brew help and if that works, it means that brew was installed properly and running from ZSH.

@soumayaseghir4177

Жыл бұрын

@@LaCarnevali hi thank you very much for your answer. I followed your instruction and your video for installing stable diffusion and it worked. it took little bit time but it's done. 🥰

@LaCarnevali

Жыл бұрын

@@soumayaseghir4177 Happy it worked!! 😄🥰

@WildWorldTravelers

Жыл бұрын

@@LaCarnevali can you help me?? How you did it??

@enocorxl

Жыл бұрын

i have the same problem

Hey Laura Carnevali! I am from Brazil. Just wanted to say a big thank you for all your help. Your channel is awesome, and I've been telling my friends about it. Keep up the great work!

Though there were some hiccups during the installation process due to network connectivity issues, I managed to complete it successfully by following the video step by step. It's fantastic! Thank you!

Thank you Laura for this tutorial. I couldn't have installed Stable Diffusion on my Mac without your video! Just subscribed to your channel!

I looked in many different places to find good download instructions, your video is by far the best one, great job!

Thank you so, so much for this tutorial! Terminal usually terrifies me, but I was able to follow the steps and install it like a pro, thanks to you!

@ShadowbannedMedia

10 ай бұрын

How do you reopen it after you save it to the browser? Thanks in advance

Thank you for making this. You approach was very detailed and simple. It's rare that things like this are so easy. You have a wonderful day.

thank u laura, your instruction to use Warp to install made this very easy!

worked like a charm! best explanation straight to the point, thanks!👏

Hey, it's really helpfull and works perfect as well, I've been tried many tutorials on mac always failed and complicated, your tutorial are simple, clear, easy and amazing, thanks a lot

Thank you, Laura, it worked perfectly. I needed to go for details and links to your page :)

thank you so much. Laura, i finally installed sd on my mac. it's working perfectly. many thanks.Best to you.

Worked perfectly. Thank you very much!

Wow thank you very much for sharing the amazing tutorial! It worked perfectly😊

Worked exactly as you instructed. Thank you!

woo. your article help me a lot! I have searched KZread for week. Thanks a lot!

Thank you, your clear instructions worked for me.

Managed to get it done after a few errors but got there at the end. Thank you for your video. Very helpful.

After hours and hours .... also several times trying.. trial and error , 😭😭😭finally it works because of you!!thank you Laura 🔥🔥🔥

You have just gained a new follower, Laura 😊 thanks for a very nice tutorial

Thank you so much Laura I spent so much time but it works 🙏

After several hours and several attempts BOOM...mil GRACIAS. Without you I would not have succeeded ☺

Amazing video, it worked perfectly on my end as well

Thank you so much! Most effective tutorial ever on yt! :)

Muchas gracias Laura, me ayudaste un montón!!!

Thank you so much, so clear and easy to follow :)

Thank you ! Your video is very helpful :D

this was so helpful thanks so much!!!

It works perfect, thank you so much!

You are an angel. Worked like a charm. Thank you so much from Switzerland

Thank you! 2024 and it still works!

Awesome tutorial! Thank u Laura 🤗

Thank you. This is what I was looking for. I want to create some of the liquid, dreamy, animations.

Excellent tutorial thank you :)

Great Video! Thank you so much!

Very very nice and helpful ! Thx 😊

Thank you so much for the video

Grazie mille Laura!! Tutorial perfetto!

Thank you so much. It works without a problem.

Laura, you help me so much! thank you !

Hi Laura, thanks for the video. Have you considered making a video on how to create an alias application to run stable diffusion? that would allow users to click an icon from the dock instead of manually navigating to the terminal and running the .sh command

@VoxerArt

Жыл бұрын

could you guide me how to do this?

Super easy and useful. Thanks

Thank you, very helpful.

Thanks! That's really interesting!

thank you so much! it works perfectly even on m2 Max apple

Big Thanks!I can really install stable diffusion on mac! Yayyyy

Thanks a lot for your explanation ! You're so cool !

Thanks a lot great tutorial ! Time to unleash my creativity :D

Great video!

Great video, thank you

Hi Laura! Thank you for instruction! just installed on my MacBook Pro 14 m1 Pro according to your instructions. everything is working! there was just a warning "Torch not compiled with CUDA enabled". and there was also a notice "A new release of pop is available: 23.0.1 - 23.1.2" to update run: pip instal --upgrade pip (and after installation I typed this but nothing happened.. maybe it has updated already? thank you for your work Laura!

@LaCarnevali

Жыл бұрын

Hi, these are just warnings and are not relevant for Mac users. For more info >>> kzread.info/dash/bejne/p5lhwaSNYKjambw.html

It worked thank youuuuu😁😁😁

thank you so much, it took me almost like an hour lol but yeahhh thanks to you it worked !!!

thank you sooo much!

great video!

Thank you very much!

Great video. Let us know if you have any feedback or questions while using the Warp terminal!

thank you for the tutorial :))

awesome thank you !

Thank you so muchhhhhhhh i subbed and liked

THX for this video... 🙂

Thank you, have a great day :-)

You are a gem.

Laura! You are amazing, I subscribed as thanks for taking the time to post and respond. EDIT UPDATE: I was getting an error message that "ERROR: Could not find a version that satisfies the requirement torch==1.12.1" ---- Turns out I uploaded Python 3.11 which is not supported and when I uploaded 3.10 it seems to be working. Still looking forward to more tutorials if you get into detail about different model packages. THX!

@LaCarnevali

Жыл бұрын

Thank you, Carlos! I m going to post soon a video to fix these small warnings when running SD! Happy you sorted :)

thank you laura

So so thankful for this video installation tutorials. Appreciate. Warp terminal works!! Everything else works, except my stable diffusion doesn't generate any image hahaha...

@LaCarnevali

Жыл бұрын

Lol, Hi! What error is showing on the terminal when you press the generate button?

@EdvvinWang

Жыл бұрын

So thankful dear. If it wasn't you. None of this would happen.

Thanks for a very clear and simple video Laura. Is the Core ML version o stable diffusion faster than the PyTorch version. I am using Apple MacBook Pro with M2 chip. If so, how do I also install CoreML version of SD 1.5? Thank You

@LaCarnevali

Жыл бұрын

Hi, same here as per Mochi. I need to test them before being able to say something about them. They can be faster, but not sure in terms of flexibility?

Thank you ! ;)

thankyou so much

Thank you so much

Hey Laura, thanks for the tuto, I was wondering what was the performance on the m1/m2

@LaCarnevali

Жыл бұрын

It can be very slow. Although there are some steps you could take to improve the performance when starting SD. I would recommend to use google colab

Hi, I just finished watching your video about LoRAs and it was really helpful, and same with this one! I am wondering if you could help me, what specs does the mac have that you use for Stable Diffusion? Would a MacBook Pro M2 13" do the job?

@LaCarnevali

11 ай бұрын

I m not using my mac as mine (M1) is not powerful enough. M2 should be fine though!

Thank you for your video, it allowed me to install Stab-eDiffusion on my M1 Macbook Air. I have also installed Deforum + Automatic111 and have been using it for about 1 week. The 3D option does not work for me, starts to render and quits. Did you happen to solve this issue? Seems to be an issue with memory and I probably will need a more powerful computer. Thanks again.

great vid thank you very much for taking time and your effort, not many smart and pretty ladies in tech business :) thanks

Hello thank you very much for the tutorial. but every time I am installing it I run into this error" TypeError: unsupported operand type(s) for |: 'type' and 'NoneType'. may I know how to resolve it?

i don't have a mac, and i have stable-diffusion for now installed on a debian PC, i watch the video only because i like you :)

@LaCarnevali

10 ай бұрын

lol

Hey laura! Do you get gpu utilization while training models? This has been my longest running issue with the web-ui, wondering if anyone else has come across it?

@LaCarnevali

Жыл бұрын

You can via MPS - but would recommend to use Colab or Linux/Windows with CUDA GPU

Hi, thanks for sharing. I've however ran into an error stating that "ERROR: Could not find a version that satisfies the requirement torch==1.12.1 (from versions: none) ERROR: No matching distribution found for torch==1.12.1" how to I trouble shoot this?

@LaCarnevali

Жыл бұрын

Hi Joanna, you need to upgrade torch (probably need change environment). You can watch this video at min 6:30 as I am looking into this error and solving it: kzread.info/dash/bejne/p5lhwaSNYKjambw.html

Hi laura, Thanks for the instructions. Does the same process work for Intel Macs? I have an Intel i9 processor with 32GB ram & AMD Radeon Pro 5500M 4 GB graphic card.

Can I ask you about refreshing checkpoints ? I have only one in stable diffusion but I was download more. Restart the process doesn't work :(

GRANDISSIMA, Grazie!

thank you for this very helpful tutorial. i do wonder how i can set up with cloud GPU such as lambda, just for better flexibility with extensions and i cannot seem to find tutorial online

@LaCarnevali

Жыл бұрын

You can use Google Colab (colab.research.google.com/github/TheLastBen/fast-stable-diffusion/blob/main/fast_stable_diffusion_AUTOMATIC1111.ipynb) I ll make a video next week ;)

Hi Laura, the installation went smooth, but I could get the stable diffusion page just the first time I ran it then, when I put the IP address ,says "unable to connect"... Do I have to install it on documents folder? I installed it on another partition. Thanks!

@LaCarnevali

Жыл бұрын

Hi Alessandro. Can you see any error popping up on your terminal?

Thank you Luara just installed. How can I link my output folder to export to my external drive?

Question, what's the first line of code I need to type in the Terminal, after everything worked fine? Because now I all the time need to redo the whole installation process, while most files are already in place of course. I guess my question is very similar to the one from Laura Carnevali, but I didn't manage so far...

@LaCarnevali

Жыл бұрын

Hi, you don't need to rerun the all file, unless you want to update the folder from gitHub. To run Stable Diffusion you need to go into the main directory: >>> cd desktop/stable-diffusion/stable-diffusion-webui (cd ) then run the ./webui.sh file >>> ./webui.sh

@GerhardDerksen

Жыл бұрын

@@LaCarnevali That worked, thank you very much Laura! Being a graphic designer, the Terminal and Warp are a bit of unknown territory for me. But thanks to you I managed :)

This did not work out as expected. But it has been a big help! I'm having issues with git saying files can't be checked out and many other problems. Now I'm stuck with the Clip file not loading. Looks like there is something not quite right at Git. It takes a lot longer to download all these files too, about three hours and the video is only 7:18 just so you know. But thanks for the video, I would have never known how to even try this.

@LaCarnevali

Жыл бұрын

Hi Micheal, very weird. You might want to try Colab? See link below. kzread.info/dash/bejne/p3qC3JayaKjIqpc.html

Do you know how to increase the generating speed? Seems like my M1 is not processing the GPU to generate picture. any help will be appreciated

@LaCarnevali

Жыл бұрын

Hi Ryoma, you can use Colab, it will be faster as is using GPU. See this link on how to do it. kzread.info/dash/bejne/p3qC3JayaKjIqpc.html

hello! thanks for the info, this is some of the best out there right now. Just a heads up, when I try to copy code from your Warp console its hard to see what the commands are. This only comes up when I'm paused tho. Cheers!

@LaCarnevali

Жыл бұрын

Thank you, Jeremiah! Noted :)

NansException: A tensor with all NaNs was produced in Unet. This could be either because there's not enough precision to represent the picture, or because your video card does not support half type. Try setting the "Upcast cross attention layer to float32" option in Settings > Stable Diffusion or using the --no-half commandline argument to fix this. Use --disable-nan-check commandline argument to disable this check. Time taken: 37.6 sec.

@LaCarnevali

7 ай бұрын

try running the webui with the --no-half argument: ./webui.sh --no-half

Thank you so much for this! Unfortunately im getting right to the end and then it says RuntimeError: "LayerNormKernelImpl" not implemented for 'Half' ...any ideas :(?

@LaCarnevali

11 ай бұрын

Hi, run the code adding the --no-half option, i.e., ./webui.sh --no-half

Hey Laura! Thank you for so detailing instruction. On the final step terminal runs into error: Stable diffusion model failed to load. What might be the reason? By the way URL to run SB has been generated.

@LaCarnevali

10 ай бұрын

What's the exact error in the terminal?

@digital.mente.

8 ай бұрын

@@LaCarnevali Error: 'NoneType' object has no attribute 'sd_checkpoint_info'. Please, check your schedules/ init values.

Hi, thanks for the video! Just want to know if Databricks Dolly 2.0 can be installed in a similar way on Mac M1?

@LaCarnevali

Жыл бұрын

Hi, I have never tried it, so not sure. I would recommend reading the instructions on GitHub.

@Shanku_13

Жыл бұрын

@@LaCarnevali thank you for your reply! 😊 I did read it and also looked it up online, but unfortunately this topic was not available. Do let me know if you come across anything on this or perhaps do a video?😁

Thanks you again for all your tutorials on Mac. I have some trouble with SD and re-install SD. it seems like SD is much slower than my previous install following your tutorial, now lam on "python: 3.10.11  •  torch: 2.0.0 " . Laura do you idea why it like it ?

@LaCarnevali

Жыл бұрын

Hi Jean, not sure, but many people are saying that SD has slowed down recently. You can try the below (this is from Github): If performance is poor (if it takes more than a minute to generate a 512x512 image with 20 steps with any sampler) first try starting with the --opt-split-attention-v1 command line option (i.e. ./webui.sh --opt-split-attention-v1) and see if that helps. If that doesn't make much difference, then open the Activity Monitor application located in /Applications/Utilities and check the memory pressure graph under the Memory tab. If memory pressure is being displayed in red when an image is generated, close the web UI process and then add the --medvram command line option (i.e. ./webui.sh --opt-split-attention-v1 --medvram). If performance is still poor and memory pressure still red with that option, then instead try --lowvram (i.e. ./webui.sh --opt-split-attention-v1 --lowvram). If it still takes more than a few minutes to generate a 512x512 image with 20 steps with with any sampler, then you may need to turn off GPU acceleration. Open webui-user.sh in Xcode and change #export COMMANDLINE_ARGS="" to export COMMANDLINE_ARGS="--skip-torch-cuda-test --no-half --use-cpu all" Otherwise, you might need to SD on external GPU (i.e., Colab)

@Jeanjean-nq8lk

Жыл бұрын

Thanks for your reply, actually iam using: export COMMANDLINE_ARGS=“ -skip-torch-cuda-test -no-half” and it’s going much faster for example before it was 80s now it’s 20-24s.

Does the quality is it better than diffusionBee osx app?

Grazie grazie ❤

What is the best settings to improve velocity of work for Mac M1?

Hi Laura. Many thanks for sharing. How can I know my github version and how to update it on Mac M1?

I love you. thank you.

Very cool! Thanks. Do you know if it is possible to train a Lora using this app on Mac?

@LaCarnevali

Жыл бұрын

Hi Miguel, training a model requires lot of power, so probably best using Colab or similar.

Hello, i have a question, how can i start stable diffusion second time after close the terminal, i need to repeat this steps again or have short way?

@LaCarnevali

Жыл бұрын

Hi, you will only need to "cd stable-diffusion-webui" folder and run the "./webui.sh" file. Note that if there are any updates on GitHub, and you want to update the folder to the latest version, you need to do the following before running the webui.sh file: - cd stable-diffusion-webui - git pull