Can’t wait just got a Prius! And this videos helps a lot!!

Thanks for making this. Watched your dynamic white video and this answers all my connection questions!

@AutoSensation

Жыл бұрын

Glad this video was helpful

update, after owning these in the uk, the easiest way to install is red to positive on battery and black to negative, constant power and simply turn on and off with your phone app when needed, i did manage to program some nice effects, you go into the screen to change what mode and click on the + then for example, add number 46 (forward trailing red) and then + 47 (backward trailing red) the two modes will then loop and you have your own Knight Rider effect. hope this helps.

@AutoSensation

7 ай бұрын

Awesome. Thanks for the info

@zsavage1820

2 ай бұрын

connect to battery....lol make sure the fire department is near by...

Awesome detailed video!

@AutoSensation

Жыл бұрын

Thanks

Great videos. Thank you

@AutoSensation

2 ай бұрын

Thanks

I like the video, however I wished you showed the process of conecting the positive cable into the fuse adapter.

Amazing

I have a question about the led lamp app, is there a way you could share with me how you connected yours because mine doesn’t work well and I don’t know why. Thank you

I wonder what inside the box when you order it. Mine has just the light, there are no other components.??

How can you tell where the ACC fuse is by reading the diagram, because the diagram itself doesn’t make sense

hi i need help i have audi a3 2019 year model can you advise me or send me any videos how i can install easily?

Do u have a install for jeep gladiator because I need it for me jeep gladiator 2022

I brought a few of these waiting for delivery I'm so gonna fuck this up somehow 🤣

@AutoSensation

8 ай бұрын

Nah. You'll be fine.

Thanks for the videos. Does it hurt the light at all when the hood closes down on it? Seems like it would crush the light.

@AutoSensation

Жыл бұрын

It does touch but does not crush it.

SilverHolder Hood LED Strip - m.silverholder.com/ref/23/ Coupon Code 10% Use autosensation10 Fuse taps Amazon: amzn.to/3LIZ8MY

I have a 2023 Elantra. I have found the correct wire at the headlamp harness to tap for DRL, but both sides are independent and shut off when the turn signal is on. I think I have to tap both lamp assemblies and use diodes to prevent back feeding. Thinking it will be a good idea to use a relay too.

@kelvinhumphrey7718

Жыл бұрын

Bro I have a 2022 Elantra, can I see your finished project?

@NighthawkMcKenzie

Жыл бұрын

@@kelvinhumphrey7718 Got 'er done today. Had to install the strip to the hood itself as the cowl has a huge 'drop off' where the hood rests. kzread.info/dash/bejne/hXil0bSoks_eZMo.html

Thanks

@AutoSensation

Жыл бұрын

Your welcome

What is the real name of the “Piggy Back” for fuses part name? Where can I find one?

@AutoSensation

Жыл бұрын

Add a circuit amzn.to/42QXyzq

ive just purchased these from silverholder. question... can you add custom modes for the lighting, the inward flow 7 colours and pick which colours etc.. or make a single colour knight rider effect. also, walk away from car after setting the mode,, and light stay on.. until u return and turn off with the app ?

@-neuro

10 ай бұрын

have you figured this out yet? i want to make my own color cycle of green/white but i dont know how

could you had powered the lights to the 7.5 fuse #18 (daylight running lights) giving you an option to turn the DRL off and the LED strip from inside the car when need to?

@AutoSensation

Жыл бұрын

Yes

I have a 2021 wrangler would this work for it also?

Question about the fuse, how about if I want to connect the hood light strip to my DRL and the fuse is 7.5 amp? Would I need it to replace it for a higher amp fuse ?

@AutoSensation

Жыл бұрын

No. Use a piggy back fuse or add on.

I just order silverholder light from link you provided how maney days it will take to deliver?

@AutoSensation

3 ай бұрын

I'm not sure.

How to connect it to a 2011 cruze 1.4l engine as idont have those kit to connect to the fuse..Can i just tap it to what ever fuse that it doesnt have power when the engine is off?

@AutoSensation

Жыл бұрын

Yes. Any fuse will do. I will try to stay between 7.5 amp to 15amps.

Hi how can I find ACC fuse inside my fuses box for my Lexus RS 450hl year 2020? Pls help . Thanks

@AutoSensation

Жыл бұрын

I would use fuse #55 DRL

Is it possible to set a timer? so after it lights up, it turns off after 10-20 seconds, like a welcome light

@AutoSensation

7 ай бұрын

Unfortunately, not with this app.

I got my light strip’s delivered and I was wondering from that black box I have 5 (thin cables) 2 X yellow, 1 X black, 1 X Green and 1 X Red. Where do they connect? Thanks

@AutoSensation

Жыл бұрын

Are you sure you got the Hood LED strip? You should only have two wires. Black and Red.

Great video! Question about these lights though. Silver Holder also has a "Dynamic Startup" light strip that is just white and has a pretty cool look to it at startup. Will these lights that are colored do the same?

@AutoSensation

Жыл бұрын

No. The multicolor ones does not have the scanning feature.

@MrElrond330

Жыл бұрын

@@AutoSensation thanks. That’s too bad

@borinkenyankee

Жыл бұрын

@@MrElrond330 what did you end up going with? Thinking the same..

Are those fuses also called add a circuit 😅😊 i just learned about those handy lil guys 😂

@AutoSensation

Жыл бұрын

Yes they are. Very easy to use.

Does it affect the seal strip or the water proofing of the car’s hood when the light is installed?

@AutoSensation

Жыл бұрын

No. Just a tighter fit.

How can I ACC fuse inside my fuse box Ford Ranger 2019??? Any help W/B appreciated

@AutoSensation

Жыл бұрын

You should have one under your hood. Try using the Horn #48 or #29 USB charge port

Does the piggyback come in the kit? Mine is on is way and I want to have everything I need when it arrives. Thanks.

@AutoSensation

Жыл бұрын

No. Here is the link. amzn.to/3LIZ8MY

is the white on this the same as dynamic white on the single color version ?

@AutoSensation

Жыл бұрын

No. The dynamic is true white. This one uses RGB to make white.

Strange question, is it possible to install another one on top of the first one? I'd like to have the thickness of the light more thicker? Thanks

@AutoSensation

Жыл бұрын

Depending on the gap between the hood and the car. Each car is different but very possible. I have the led turn signal strips and the hood led strip on top.

@markp8686

Жыл бұрын

@@AutoSensation I just looked at it at night, it's bright enough, but did the same, put the led turn signals on too, will get ones in the back, very happy about the product! Thank you for your help!

Need help, no matter the fuse I plug it into. It turns on right away and won’t turn off, anyone have this issue

@Bigdogpunisher

10 ай бұрын

Someone help plz

Please help! I have 2015 altima and all fuses are hot all the time so what do i do..

@AutoSensation

Жыл бұрын

I'm not familiar with the Altima but try shutting off the engine and test again after 5 or so minutes with all the doors closed. The fuses maybe on a time delay.

I've ordered it, but wondering.. If the scan feature starts in the center and scans outward left and right, how will that change if you need to shorten the strip? I know starting in the middle and working your way left and right is the way to install, but does that mean you have to "hide" the longer end of the power side?

@AutoSensation

Жыл бұрын

Yes. Not recommended to cut because the center will not change. If you cut make sure you seal tight for water proof and you must hide the power side to even out.

@mattdeluna3869

6 ай бұрын

Just wrap black electrical tape on the ends

Hello how do I install brighter led on 2019 pilot licence plate.

@AutoSensation

6 ай бұрын

I'm not sure as they are already LED's in a fixture. Need to find a replacement including the housing.

Can u please do a video on a dodge charger scatpack please

i have the same app how do i set it to do my own 2 color combination of either flashing or cycling? like if i want to do green and white is that possible? to make it cycle from green and white or another color combination?

@AutoSensation

10 ай бұрын

Yes it's possible. On the bottom of your app button second from the right is your custom feature.

@-neuro

10 ай бұрын

@@AutoSensation thank you so much

did you leave the red adhesive cover on the other side?

@AutoSensation

Жыл бұрын

Yes I did as it didn't bother me. Others have removed it.

I ordered mine but I'm afraid of installing them. LOL... I'm going to have to waste money and have a pro do it. :( I don't have so much experience with cars so I'm a little nervous.

Front of car, with acumulator i dont have fuse box and what can i do with negative pole

@AutoSensation

7 ай бұрын

You can ground the negative to the chassis with a bolt or look for an unpainted bolt.

@BestGadgetsFromAliexspre-zw8zf

7 ай бұрын

@@AutoSensation on Mercedes sprinter there is not fuse box with acumulator what can i do

@BestGadgetsFromAliexspre-zw8zf

7 ай бұрын

@@AutoSensation what can i do with negative wire

Hi therr i recently got this installed my friend installed it for me, i think he did it backwards the leds light up the engine bay and not thru the grill , as its already connected is there a way to remove it and correct it? If so how would i re stickmit down as both red tapes have been removed ... thanks

@AutoSensation

Жыл бұрын

Yes. Just pulled out gently and flip the LED strip. You will need to remove th old adhesive and put a new one on. Use this amzn.to/3JpGxFF

@aminjaffer3825

Жыл бұрын

Thank you for the advise and information

What color wire did you connect it too??

@AutoSensation

Жыл бұрын

Black wire to ground. i used an unpainted bolt. Red wire to my ignition fuse.

Big mistake using a red wire for ground

@AutoSensation

Жыл бұрын

Yes you are 100% correct. I didn't have the black automotive wire at the time of recording and wanted to finish the video. It has been switched to avoid confusion. Thanks

I would like to install this on my Hyundai and i see the LED strip sits on hood seal (aka hood weather strip). Is this going obstruct what the seal is supposed to do or does this break Hyundai warranty as far as you know?

@AutoSensation

Жыл бұрын

Mine does not sit on the weather strip. i don't think it will stick on the strip.

@user-nx9rg4xm2o

Жыл бұрын

@autosensation Does the strip glue let us undo and re-stick in case we mess up the first time?

@AutoSensation

Жыл бұрын

@@user-nx9rg4xm2o No not really. If you don't press in and just layout first you may be able to realign. If you pull completely off. It may not stick well the secind time. The adhesive is strong. I transfered to a different vehicle and used this. amzn.to/3Uo7fCB

Is another model with multifunction effect. & Turning signals....on aliexpress...

@AutoSensation

Жыл бұрын

Lots on aliexpress however, quality is a 50/50 shot.

Thanks for the informative video. When trying to order the light there are 3 sizes 59", 70", & 79". Can you explain the size differences?

@AutoSensation

Жыл бұрын

Different sizes in inches for different vehicles

Can the red wire be connected to the rear power outlet fuse?

@AutoSensation

Жыл бұрын

Yes as long as the fuse will have no current when vehicle is off

@duaneshadd777

Жыл бұрын

@@AutoSensation even if it's a 20 Amp fuses.

Question where do you buy the strip light ,does it is come with the fuse connect with wire. that you show on the video

@AutoSensation

Жыл бұрын

Purchase strip here. m.silverholder.com/ref/23/ No it does not come with the fuse tap. amzn.to/3DZGhdx

I installed my dynamic white strip today but my car shows “headlight problem” error on the dash. Do I just need to clear codes?

@AutoSensation

Жыл бұрын

What kind of car? Most likely you just need a reset. Disconnect the battery, wait a few seconds then connect it again.

@medicdavid1

Жыл бұрын

Posted on the wrong video, but it’s on 2019 Pilot

@AutoSensation

Жыл бұрын

@@medicdavid1 disconnect the battery for a few seconds then reconnect. That should clear codes up

Would it work for seat ibiza?

@AutoSensation

Жыл бұрын

Yes. It's universal. Just have the find the right fuse to tap into.

In my car manual the fuse box diagram tells me there are a few 10A fuses that are marked as 'spare'. I'm guessing that's the one I'm using when connecting the red wire?

@AutoSensation

Жыл бұрын

No. That is your spare fuse in case something goes out. It's not connected to anything.

@WilldaBear

Жыл бұрын

@@AutoSensation Oh okay, I understand now. I looked over it again and see that my ACC fuse is a 40A. So I'll need a piggyback fuse adapter to plug that ACC and this new red wire from the LED set like you did.

@AutoSensation

Жыл бұрын

@@WilldaBear yes.

@WilldaBear

Жыл бұрын

@@AutoSensation Thank you. Is there another fuse that you recommend I can use if I want to add a lightbar? Since the ACC fuse will be already taken by this LED strip. Or should that be hooked up to the car's battery?

@AutoSensation

Жыл бұрын

@Will depending on how much power your light bar is taking, I would use the battery. Best if you use a switch and a rely.

How can I change the color from white to red as soon as the engine is on ?

@AutoSensation

Жыл бұрын

You can set it to red and it will start at red. As far as transitioning to red from white, I'm not sure that would be possible with this kit.

I didn't get the Bluetooth module with my kit!?!? How do I get one?

@AutoSensation

8 ай бұрын

m.silverholder.com/ref/23/ contact support and let them know. support@silverholder.com

What is the name of the app?

Hello. My question is, although these lights are multi colored, can they be set to do the startup scan mode, and if so, can you please do a follow up walkthrough video? Thanks for your time.

@AutoSensation

Жыл бұрын

No. The multicolor ones does not have the start up feature.

@nailed2ax_126

8 ай бұрын

​@AutoSensation that's dumb

@subzrodagr8689

8 ай бұрын

@@nailed2ax_126 Why?

@nailed2ax_126

8 ай бұрын

@subzrodagr8689 because I like the start up lights thing, I brought the multi colour one. Hasn't arrived yet. Should have looked on KZread first before buying them 🤣

@subzrodagr8689

8 ай бұрын

@@nailed2ax_126 ohh. Right. I’m actually in the same boat. I thought you were trying to say my question was dumb. Personally, I believe the only dumb question, is the one that you don’t ask, and assume. They definitely look cool on my vehicle though!💪🏾👍🏾🫡

Greg I think you should have stepped back with the camera so that you could see the whole hood as the corners on the front are a very sharp turn . I have a Prius and it didn't look the best so I finished at the first sharp corners I blacked out the original light with moving it in towards the center then blocked off the light coming from the strip with black duct tape definitely looked a lot better I bought from the internet and sent it back they sent me 1.2m light strip so I only had to block off a few cm each side with the black tape but it made it look a lot better that first bend makes it very difficult to bend the light strip. Anyhow whatever suits each go particular person

Does this have the start sequence

@AutoSensation

Жыл бұрын

No. Only the dynamic white or blue.

Debating to go with silverholder or fluxgeare. Where is silverholder located or where they ship from?

@AutoSensation

Жыл бұрын

They do ship from China however they also do have US warehouse as well. If they have stock in US they will ship from there.

@TheOnishinobi

Жыл бұрын

@@AutoSensation much appreciated

Use green or black for ground extension

@AutoSensation

Жыл бұрын

I bough more black automotive wire as I ran out during installation and was lazy. I have now switch the wiring to avoid confusion.

I bought the one that is only one color, Dynamic LED strip, the package did not include any instructions to follow for safety, you know. I understand black goes to ground and red to ACC the same way you did it with a Piggyback fuse , so I guess the installation is the same for both types of led strip.

@AutoSensation

Жыл бұрын

Yes. The installation is the same.

Is this compatible for tesla or any electric car ?

@AutoSensation

Жыл бұрын

Yes. It's universal. You just need to find a good acc fuse to tap into.

Just received one, how can I connect it in order to have it on during the day and also during the night, please.

@AutoSensation

Жыл бұрын

Go to your fuse box. Look for a fuse that is stays on when the vehicle is on and is off when the vehicle is off. Use a piggy back fuse to tap into it and connect the red wire. The black wire will connect to an unpainted bolt.

@markp8686

Жыл бұрын

@@AutoSensation thank you for your swift response

@markp8686

Жыл бұрын

@@AutoSensation can you please let me know name of the ideal fuse, like,, start,, or,, engine module,, etc. Thank you

@AutoSensation

Жыл бұрын

@@markp8686 it is labeled ignition

@markp8686

Жыл бұрын

@@AutoSensation thank you so much!

You probably don’t know this but in automotive and in a lot of other cases you do not make a red wire a ground it’s just safer that way what you can do to fix your problem is wrap it in black electrical tape

@AutoSensation

Жыл бұрын

Yes. I have been told by another fellow subscriber. I learned and changed it to black. I was out of black wire that day of the installation and was lazy to buy more black ones. Now I understand it has some importance. Thanks for letting me know. 😊

you make no mention on where to find our how to find the APP etc

Why is there adhesive tape on both sides?

@AutoSensation

Жыл бұрын

The wires come out on one end. With tape on both sides you can have the wires either on the left side or the right side of your vehicle. Closer to where your battery or fuse box is.

@willyb507

Жыл бұрын

@@AutoSensation so you just leave the unused side with that tacky looking tape on it?

@AutoSensation

Жыл бұрын

@Willy B you can remove it. A bit tidious but can be removed. I'm lazy and just left mine. I've heard other put black tape over it but I think that makes it worse.

In u.s.a?

How are these lights lasting after several months?

@AutoSensation

Жыл бұрын

After 3 months of normal use. Still runs great. No complaints so far. If I were to change something it will get the dynamic white. Looks better IMO.

@sumeetlal1

Жыл бұрын

@@AutoSensation, Yes I’m planning to order the dynamic white for my 2022 BMW X3. Only thing I purchase besides the led strips is the piggyback fuse right?? In that way I don’t need to do any wire splicing/cutting. Really don’t wanna cut any wires and mess with the electrical stuff on my BMW.

@AutoSensation

Жыл бұрын

@@sumeetlal1 yes. That is correct

@sumeetlal1

Жыл бұрын

@@AutoSensation, Awesome thank you.

@basmatic_rice

7 ай бұрын

I've gone through 3 of the dynamic ones and they've all failed in less than 3 months. They look great but the wires are extremely thin. How are yours holding up?

What is the name of the app? There are a few in the Play store.

@AutoSensation

Жыл бұрын

LED Lamp

@eltroubador

Жыл бұрын

By Tanguixing?

@AutoSensation

Жыл бұрын

@@eltroubador yes. That's what I'm using.

@tookool4skool98

Жыл бұрын

@@AutoSensation how do you connect the app to the car? i installed the app and can’t get the colour changing to work.

You did not show how to connect with your phone I am having prob with that

@AutoSensation

Жыл бұрын

Download LED LAMP app. On the home page hit the plus sign on the top right. Then on the left tap CAR. Then select RGB DMX

Is this street legal? A $200 ticket for $20 strip would be stupid

@AutoSensation

9 ай бұрын

Depending on state. Legal here in WA only if not flashing and in white or amber color

The light strip is wobbly at the center. Not good.

I think you inserted the piggyback into the fuse box the wrong way. The line out needs to be on the opposite side of the fuse terminal. The easiest way to tell if it's wrong is by removing the bottom fuse and seeing if the light strip stops working.

@AutoSensation

Жыл бұрын

You might be right. I'll have to double check. The piggyback fuse can't turn the other way because of the wire. I might need to look for a different fuse. Thanks

@ausprime

Жыл бұрын

​@@AutoSensation I just edited my comment. I meant to say bottom (factory fuse). The factory fuse can blow. But the light strip will still be working.

This guy's "gonna go ahead" an awful lot

Looks awful

Sorry man... looks horrible on that car.. especially during the day, can hardly see it even with a cloudy day.. bought this and sent it back same day...

No thanks looks like poop

Lol red wire for ground

@AutoSensation

Жыл бұрын

Yup. Ran out of black wire and was lazy to go the the store.

Where does this ship from usa or china?

@AutoSensation

Жыл бұрын

I'm not sure, but I believe there have some warehouses in the USA.

@metyner

Жыл бұрын

Amazon carry this product.

@AutoSensation

Жыл бұрын

@@metyner Yes