👉Fiber Optic Ambient Light Amazon: amzn.to/3pVtm6f

@iAmsha

9 күн бұрын

How many amps should the mini fuse be for the Chasing ambient dreamlight strip LED's?

@AutoSensation

9 күн бұрын

@@iAmsha 5amp should be good

It looks good, I also want to buy.

Guys, avoid bending fiber optic wire greater than 90 degrees as it will affect light brightness after some time. It has to be as straight as possible for the best effect and just if you need to bend it a little bit.

@Solar-Atlas

Жыл бұрын

Can you trim it if needed?

Nice job again - you are a true gadget guy. If I didn’t hate my wife’s Pilot(19 touring, electrical issues) I would do this.

@AutoSensation

2 жыл бұрын

Thanks.

@DogsSnipes

Жыл бұрын

It's not bright enough for a corolla cuz u gotta bend it a lot :(

Pretty nice job Sir

@AutoSensation

Жыл бұрын

Thank You

good job man

@AutoSensation

14 күн бұрын

Thanks

Thank for the video! Does the app/Bluetooth have to open for the music function to work? Or can I just set it once and forget about it?

@AutoSensation

Жыл бұрын

Set and forget

What happens if your car doesn't have a foot well lighting in the car, would I would have to use the fuse box to hardwire for the front cig. lighter slot. But not sure if i need to use a 22-16 awg connection to crimp and connect the wires or use a 16-14 awg.

@AutoSensation

2 жыл бұрын

22-16 awg should be fine.

This is a great video, very useful information. Also, when it's hard-wired does it always turn on when you start the car, or can you set it to be off when you turn the key?

@AutoSensation

2 жыл бұрын

You can set it to turn off when the key is off. You just connect the power wire to a fuse that shuts off when the keys is off.

@bradleylovej

2 жыл бұрын

@@AutoSensation Cool, thanks!

These products are more complicated to me than installing a double din apple car stereo

@dannylopez528

Жыл бұрын

Lol I thought I was the only one. I can drop an engine and tranny but can’t seem to stuff the wire in my interior

@wb8131

Жыл бұрын

@@dannylopez528 lol takes a lil i’m getting used to but basically just shove that shit up under there

@wb8131

Жыл бұрын

@@dannylopez528 you kind of want to get that little scraper thing in there and then push the plastic bit in as you’re pulling the scraper along

Can I just use the 12v cigarette adapter to power it on? So I can manually turn them on and off without being hardwire.

@AutoSensation

2 жыл бұрын

Yes you can

you said that you used two led heads to avoid hotspots; i can see the hot spots are mostly in the bends and curves of the cable, but using two heads? what does that mean?

@AutoSensation

2 жыл бұрын

Using two led source head. One on each end.

A little trick leave the tube in the sun or heatgun it a little makes corners much easier

@AutoSensation

2 ай бұрын

Yes that is a great tip. It does get difficult in tight corners. Thanks

How do you like this over the EL wire? Which one do you recommend?

@AutoSensation

2 жыл бұрын

I love these over the el wire. The ability to change colors and control brightness did it for me.

@PeteyPablo408

2 жыл бұрын

@@AutoSensation thanks glad I seen your videos

Does this drain car battery!

@AutoSensation

8 ай бұрын

No it does not as long as you don't connect directly to the battery.

I’m this vid you only use 1 head? If you put one on each end would you avoid those hot spots? I want to do the front and back of a crew cab Ram. Not sure if 5 heads will cover it. But at the price I can get 2 kits. You think this kit compares to the more expensive fiber optic kits like Xk or oracle? Thanks. Good vid👍

@AutoSensation

2 жыл бұрын

Yes. I actually went back and used two heads. One on each end and it turned out excellent.

@AutoSensation

2 жыл бұрын

@@jaredgonzalez8421 two of the led head source connected to each end. You would not need it for the doors if your fiber optic line is short.

@jaredgonzalez8421

2 жыл бұрын

@@AutoSensation is there a certain way to connect them ?

@AutoSensation

2 жыл бұрын

@@jaredgonzalez8421 no not really. Just connect two heads to one long fiber optic wire.

Question: can you see the reflection of the light on the windshield or side windows?

@AutoSensation

2 жыл бұрын

For this set up not on the windsheild. Low enough that it does not reflect. On the side windows yes but not much. Only at night and only the corners.

@brindaswiss1516

2 жыл бұрын

I Saw a cuttable light set on internet today.for for doors etc...

Is it the same process to ground the wires to the car? I drive a 2014 scion tC

@AutoSensation

8 ай бұрын

Yes

How meters was it? So you didnt cut the wire at well, you just went on all arrround the front with out cutting it? Dont you use cigg cable?

@AutoSensation

2 жыл бұрын

The kit comes with 6 meters. At first I didn't cut but I ended up cutting so I can use some for the doors. No cigarette cable. I connected to my existing footwell lights.

@SomaliNewMusic

2 жыл бұрын

@@AutoSensation when it comes the doors, where do you connect them thoughe?

@AutoSensation

2 жыл бұрын

I have not done them yet. I have that on my to do list.

@SomaliNewMusic

2 жыл бұрын

@@AutoSensation but its diffcuilt when cut it, doors not nessecery, you can just do all areound the front of the car and use cigg cable, otherwise some exprienced told me when you are takin off them, it will be hard work!

@AutoSensation

2 жыл бұрын

Not hard at all. I will order another kit and upload a video.

I don't have the footwell lighting, how would I connect the wires? I've only seen people use the cigarette lighter, but that is ugly

@AutoSensation

Жыл бұрын

You can tap into the fuse box. You will need to figure out which fuse is the cigarette plug fuse and tap into that.

How do you connect app with installation? In my car it’s manually on /off via 12V socket but now it’s flashing all colors red green blue all the time it is very annoying..

@AutoSensation

Жыл бұрын

If it's the same lighting I have. Download the Happylighting app. Make sure you lights are on. Wait a few seconds for the Bluetooth to turn on from the controller box. Turn on Bluetooth on phone and connect to the controller. Then open the app. On the top left side menu make sure you are connected to the controller. Now you can control the lights. Hope that helps

@alex_garage

Жыл бұрын

@@AutoSensation what is the controller name for the lights to connect via bluetooth?

@AutoSensation

Жыл бұрын

@@alex_garage Triones or something like that

Can i have a link for this product to buy

@AutoSensation

Жыл бұрын

amzn.to/3pVtm6f

Does this work on 2016-2018 as well?

@AutoSensation

Жыл бұрын

Yes. It's universal

Could you please do a door video please

@AutoSensation

2 жыл бұрын

Yes. It is next on the list. Give me about a week or so. Subscribe so you know when I post the video. Thanks

Can someone send me the link to this product

@AutoSensation

Жыл бұрын

amzn.to/3pVtm6f

Can they be wired into the door switches. So when you open the door and close it they turn on and fade when the car is started. Then turned on when desired??

@AutoSensation

2 жыл бұрын

Yes they can be wired to the door switches. But will not turn on when desired. Will only turn on with whatever power source you decide.

@chrisperry9002

2 жыл бұрын

@@AutoSensation thanks, wondering if you could use another switch wired in to use them for both door entry then switch at will when wanted. Really want the factory look of lights when entering and at will when parked. Was the install difficult? I have a corvette and there aren't many gaps to tuck anything in to. And most factory lights are hidden by a shelf above like a recessed lamp where as you don't actually see the bulb. You just get that beautiful light coming down from under the shelf without actually seeing the bulbs themselves. My father's Mercedes e400 had well hidden lights and looked awesome except for the ugly burnt orange color they were. But the layout looked great. Thanks again.

@AutoSensation

2 жыл бұрын

@@chrisperry9002 yes. Use this kind of switch. I did it for my underlights. kzread.info/dash/bejne/fZWXwceDp8fdiNY.html here is part two of the video kzread.info/dash/bejne/hqOnlpeuYsbaZbw.html

@chrisperry9002

2 жыл бұрын

@@AutoSensation great. Thanks again. Another project for the list.

Where can i purchase the ambient lights from?

@AutoSensation

Жыл бұрын

amzn.to/3pVtm6f

@tnamen1307

Жыл бұрын

@@AutoSensation are those el wires??

Where can I buy it Bro

@AutoSensation

2 жыл бұрын

amzn.to/3gF3eXC

What app can I use?

@AutoSensation

2 жыл бұрын

Happy Lighting. If you have the same kit I have.

Why does it only laminate at night

@AutoSensation

10 ай бұрын

I connected to the parking lights which automatically turns on at night or when I manually yurn them on.

What is the 12 volt doesn’t work ..

@AutoSensation

2 жыл бұрын

What do you mean if the 12v doesn't work?

@stocke5060

2 жыл бұрын

@@AutoSensation it comes with a 12volt cigarette thing and I plugged it because I thought that how it would turn on but it doesn’t work

@AutoSensation

2 жыл бұрын

@@stocke5060 on the back of the cigarette plug is a button. Push that. Make sure it's connected to the control box.

What’s the name of the product?

@AutoSensation

2 жыл бұрын

Everbrightt third brake light strip amzn.to/3yaRovY

Is there another place I can hardwire ?

@AutoSensation

2 жыл бұрын

Yes. The fuse box. Look for INST PANEL LIGHTS in the Honda pilot.

@jonathanj.rodriguez1469

2 жыл бұрын

@@AutoSensation thank you !

in daylight the installation looks awful for me

This type of lighting is good,, but don't over do it, like you did here.... try to keep it more ""OEM style "" I seem videos where they wrap the entire interior of the car..

@AutoSensation

7 ай бұрын

Thanks

Pilot ugh how bout a civic!

@AutoSensation

Жыл бұрын

It will work on a Civic too

N y h

Ttaps are garbage as they're unreliable just use butt or plug connectors

@AutoSensation

Жыл бұрын

Agreed