May be you looking the same valve with PEX installation ? Shower valve to PEX pipe kzread.info/dash/bejne/i5iMzsGApdjAgag.html

@patricksamano8409

2 жыл бұрын

Yes

He makes the best videos! Fast, great footage, very helpful and done right! Thank you sir!

@FixitAll

5 жыл бұрын

Thank you for watching my channel !

I am installing that exact faucet ! So helpful to see the copper work - thank you!

@FixitAll

3 жыл бұрын

Nice, you welcome.

@coryparker9614

2 жыл бұрын

How did you seal it. I only see the circle valve sealers

This is what I need. No long dialogues and straight to the point. Thank you!

@FixitAll

Жыл бұрын

Thank you so much!

@victorenriquecarrilloorteg5093

Жыл бұрын

Bien con el fondo de la musica.

@victorenriquecarrilloorteg5093

Жыл бұрын

Y sin palabras.

Your a beast 💪 my plumber got jealous because I showed him your videos , admit your really good. Thanks for your videos it helped him.

@FixitAll

5 жыл бұрын

Thank you.

Perfect!!! Showed exactly the steps without all the wordy “look at me” stuff.

@FixitAll

Жыл бұрын

Thank you 😊

Thank you, Sir! This is exactly what I needed to see! I had an idea but you made it happen for real!

@FixitAll

Жыл бұрын

Glad I could help!

Thank you for showing us.

@FixitAll

4 жыл бұрын

My pleasure

I'm a plumber and hice been a lot of help thanks

Excellent instructions. Better than the instruction manual and video offered by Home Depot.

@FixitAll

2 жыл бұрын

Thanks 😊

Awesome video mister !! straight to the point

@FixitAll

Жыл бұрын

Thank you!

Bravo, muy buen video ,muy bien explicado👏👏

you are still the best 4 years later! this is coming to you from an engineer

@FixitAll

2 жыл бұрын

Thank you.

Thank you for the video. Спасибо. I have a similar shower but mine has a tub spout. After installation I have a knocking sound in the valve area once you close the water. I am assuming this is two story house on the video as your pipes go up to the ceiling. So the " hammers" are not installed?

@FixitAll

4 жыл бұрын

No Hammers.

Nicely done!! 👍

@FixitAll

3 жыл бұрын

Thank you! 👍

Thank you comrade!

@FixitAll

2 жыл бұрын

Thank you too!

Spasibo I just bought this system , that;s an awesome video

@FixitAll

4 жыл бұрын

Спсибо!

Nice job!

thanks for the help👍

@FixitAll

5 ай бұрын

Happy to help

thanks for the great video , what is the range of depth this system has? consider 1/4 cement board and 1/4 tile ? thanks

@FixitAll

4 жыл бұрын

Can't remember. Manual book has diagram of installation dimensions.

Thank you buddy

Thanks friend!!

@FixitAll

3 жыл бұрын

Any time

That was awsome 👌👍

@FixitAll

3 жыл бұрын

Thank you 😊

Мастер!

Thanks for the video. is there a way to adjust the water temperature on the POP faucet?

@FixitAll

9 ай бұрын

I am not sure, I didn't see inside some temperature adjustment ring, like some models has. You need to Google this question to this model.

Thanks!!

@FixitAll

2 ай бұрын

You bet!

Good video, I have a question how far do you put the orange box out of the wall ,,, because I dont want the box to be inside the wall to much when I put the tile on

@FixitAll

4 жыл бұрын

I read manual, it says how far. And box has some marks for depth installation.

Good job buddy

Thank you

@FixitAll

3 жыл бұрын

You're welcome!

Cool stuff

I got a question, Did you cut the cement board around the orange box?, or did you trim the orange box and left just the round valve striking out of the wall?

@FixitAll

3 жыл бұрын

I just install it. Cement board and tile was done by other company.

Nice video! How much did you make the cartridge stick out from the framing? Should the plastic trim come flush with the finish tile or stick out more? Thanks

@FixitAll

Жыл бұрын

Im not remember. Manual usually says it. Or better to fully assemble the walve with trim and measure it. In this way measurement you must know the future wall, thinset and tile thickness .

Hi, few pointers....You need to remove any cartridge before you weld and let the copper cool off ...plus I personally would go for a welded connection to the mixing box if available...that's leak free.

@FixitAll

2 жыл бұрын

You right, but, remove cartridge only need if you will solder directly to the brass body inlet, in my way no necessary to remove it. Like in this my video I removed cartridge kzread.info/dash/bejne/ZWSNspmMZ87ZlpM.html Thank you for this tip!

Perfect 😊

@FixitAll

Жыл бұрын

Thank you!

I just installed one of these,put my shower head and wand nipple 7/8 out wall for tile,i hope it works out,there is no room for error with this rough in.

@richardtorres1293

3 жыл бұрын

I just bought a set for shower bath combo with the wand. Instructions were useless. Set the ear elbows flush with my 1/2" cement board. How did the 7/8" work for you?

@TheMemo1776

2 жыл бұрын

i put my flush to the 2x4 plus 1/2 inc of cement bord n tile i hope my shower head goes in

Cool

Watching at 1/2 speed and much easier to follow

@FixitAll

2 жыл бұрын

Thank you, you got it!

awesome video! does the valve need to be near the wall?

@FixitAll

Жыл бұрын

Check the manual. The manual show diagram how it must stay from front tile finish line.

Do the drop ears for the shower head and the handheld shower need to be flush with the face of the finished tile, or do does the shower arm go into the finished wall partially? Thanks!

@FixitAll

2 жыл бұрын

Hard to say without knowing model and pictures of the shower parts. Usually the manual book shown how to install and all dimensions.

@FixitAll

2 жыл бұрын

I install the 90 degree shower arm elbow mostly close to the tiles or even in to tile hole and seal around the Hardy wall/tile, in case water leak water will flow into the room rather than in/between the walls. Watch this short episodes of seal example in my remodeling video : kzread.info/dash/bejne/aWRhpcxqod2dl7g.html kzread.info/dash/bejne/aWRhpcxqod2dl7g.html And hire the video what can be happen if 90 elbow not in tile and not sealed to the tile edges - water leak between wall - kzread.info/dash/bejne/qYp7r5ORYrK8gLg.html

@ahjuns

2 жыл бұрын

@@FixitAll thanks for the info! How much of your threads from the shower arm actually screw into the drop ear? I can only get mine to go in about half way. Is that correct?

@FixitAll

2 жыл бұрын

@@ahjunsWas never checked it, I think its ok halfway becouse there is pipe tapered thread, not regular straight, so just apply Teflon tape and screw as much as you can.

How far is the shower valve extended out beyond the studs? I’m installing the same system and I’m not sure on the proper depth

@FixitAll

Жыл бұрын

You need fully assembly valve and check how far you need move valve with face plate to get flash with tile.

Todos los videos que he visto los comentarios tienen problemas con el manual en las especificaciones de grosor de la pared

What was the glue/paste on the brush you put in the copper fittings and the copper pipes before soldering them?

@FixitAll

2 жыл бұрын

Check online in your country/city paste for soldering copper pipe. I was used here in US this one - www.amazon.com/Oatea-Oatey-53017-Paste-Flux/dp/B000UTSSQO/ref=asc_df_B000UTSSQO/?tag=hyprod-20&linkCode=df0&hvadid=198093934741&hvpos=&hvnetw=g&hvrand=17832351563548866503&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9033288&hvtargid=pla-350674583024&psc=1 www.homedepot.com/p/OATEY-H-20-1-7-oz-Lead-Free-Water-Soluble-Solder-Flux-Paste-301302/100177185?source=shoppingads&locale=en-US&&mtc=SHOPPING-CM-CML-GGL-D26P-026_001_PIPE_FITTING-NA-NA-NA-SMART-2998850-NA-NA-NA-NBR-NA-NA-NEW-PL3_Live&cm_mmc=SHOPPING-CM-CML-GGL-D26P-026_001_PIPE_FITTING-NA-NA-NA-SMART-2998850-NA-NA-NA-NBR-NA-NA-NEW-PL3_Live-71700000094213694-58700007814434200-92700071019453829&gclid=Cj0KCQjwxIOXBhCrARIsAL1QFCYYLM7GpbiA2hsYPlhPQeFQumQmRIqQqaPtl5Q7NdTjfAtLHmBMNqwaAg1mEALw_wcB&gclsrc=aw.ds

@ADmeditate

2 жыл бұрын

@@FixitAll thank you!

Hi, this valves can get certified approval for inspection new bathroom installation in New Jersey?

@FixitAll

2 жыл бұрын

I dont know.

on the threads, i see you sued both Teflon tape and some sort of paste. What was the paste and why use both?

@FixitAll

3 жыл бұрын

Just for sure it will newer leaking. I dont want come back for rebuilding this shower if it leaking from bad sealing.

@FixitAll

3 жыл бұрын

Here is a paste - www.homedepot.com/p/RectorSeal-T-Plus-2-1-75-oz-Non-Stick-Thread-Sealant-23710/100116773

@anthonyvigliaturo8894

3 жыл бұрын

Thank you sir

I have the same valve. Is there a way to adjust the cartridge temperature?

@FixitAll

2 жыл бұрын

I dont know. Read instructions.

How long it should stick out from the finishing wall ?

@FixitAll

Ай бұрын

The manual book shows itt. Im not remember.

Hey, do you know how to adjust the temperature of the water to a maximum temp like 110 Farenheit with this system? Other valves are easy to adjust but I'm having trouble with this one.

@FixitAll

3 жыл бұрын

Hi. Never done it. And the ovner never complained about temperature. So i just install it from the box like it was in factory setting.

@JSIBachata

3 жыл бұрын

@@FixitAll thank you. Where I live it's code to set it at 112 or bellow. If it goes higher than that, the inspector won't pass it

@FixitAll

3 жыл бұрын

Oh, i see.

@clementejr2001

2 жыл бұрын

Have someone find out how to get warmer water from this system?

I saw you didn't pull out any plastic from inside the valve. No problem with melting when you soldered it?

@FixitAll

2 жыл бұрын

As you can see, I'm not solder thread connectors on body, it was done on side. Then only elbow was done, and it's no problem. What can I say, practice and experience and not to overheating!

@patricksamano8409

2 жыл бұрын

Thanks

@patricksamano8409

2 жыл бұрын

First timer here.

@FixitAll

2 жыл бұрын

Well, in this case, you better to remove all inner parts before soldering.

Прикольно.класс

How did you know the depth to mount the mixer valve?

@FixitAll

2 жыл бұрын

You need to know full wall thickness - Hardy Backer wall + tile thin set + tile.

@FixitAll

2 жыл бұрын

Instruction shows all preparation and installation direction.

hello, i have same product. After installing, the pressure reduced a lot. Is there a way to fix it?

@FixitAll

3 жыл бұрын

I can't say anything. I just install it. How it work later can't say. But customers not call bak, so looks like all work perfect.

@jasonrobinson9242

2 жыл бұрын

Im having problems with the same set up pressure is low and the hot water won't get hot just warm

can you tell me the sizes for the copper pipe pieces you used?

@FixitAll

3 жыл бұрын

Standard 1/2 inch.

@Moriahcs1

3 жыл бұрын

@@FixitAll thank you

Untuk jalur air panas klo pake pipa paralon rucika aman ga bang

@FixitAll

3 жыл бұрын

Semua pipa terbuat dari tembaga.

Добрый день, какого-то диаметра pex pipe рекомендуете использовать для такой работы? 1/2 дюйм имеет меньше диаметр внутри чем медная.

@FixitAll

3 жыл бұрын

Да но 1/2 PEX это стандарт для всей проводки по дому. Никогда не видел чтобы в стенах было 3/4. 3/4 или 1 дюйм используется только для подвода воды от улицы к водяному нагревателю. После бойлера все трубы только 1/2. И не важно то медь или PEX.

@samutya77

3 жыл бұрын

@@FixitAll в комментариях у специалистов видел рекомендации для душа поставить больше диаметр🤔 не охота паять хочу pex попробовать

@FixitAll

3 жыл бұрын

@Joseph Bukalov можно поставить и 3/4, но только если вы будите их тянуть начиная от бойлера воды. А иначе смысл и как это будет работать? От бойлера идет 1/2, потом в душе у вас будет 3/4 ? И что 3/4 дадут , если подача к душевой комнате все равно идет по 1/2 ? В трубе 1/2 PEX давление воды такое что выбрасывает наружу 14 галлонов в минуту !!! А душевая головка выдаст всего 2-3 галлона в минуту. И зачем тогда спрашивается 3/4" труба, которая выдает 23 галлона в минуту?

@FixitAll

3 жыл бұрын

@@samutya77 Вот на PEX тоже самое, Shower valve to PEX pipe kzread.info/dash/bejne/i5iMzsGApdjAgag.html

How do you water proof it?? I can only find circle valve seals

@FixitAll

2 жыл бұрын

In this project owner ask me to install valve only, rest of the work was done by other people. So i don't know what they done. Usually after tile valve covered by face decorative plate (circle or square) and seal by silicone around plate to the tile.

@FixitAll

2 жыл бұрын

Hire is what the owner has with this valve. In link you can find many different finish color option. So try to find from this seller just a face plate. www.amazon.com/Esnbia-Brushed-Systems-Mounted-Bathroom/dp/B07RM348YC?th=1

Gut

@FixitAll

2 жыл бұрын

Thank you!

No air chambers?

@FixitAll

Жыл бұрын

No. Its not necessary there.

My is created a lot of noise from faucet. Does anyone know how to fix it. Thanks.

@FixitAll

2 жыл бұрын

Check water pressure in the house. Some times it may reflect. Standard water pressure should be 50-60 psi.

Can I trade the euro dance music for any idea how deep to the finished wall?

@FixitAll

Жыл бұрын

Depend on thicknesses of the finished wall. The valve came with an installation instruction book.

How to adjust hot water temperature on these

@godwinsamuel9821

Жыл бұрын

Can you help with this?

@FixitAll

Жыл бұрын

@@godwinsamuel9821 I am not done it. But. You can see the RED ring inside the handle. Remove it and reposition to left or right more or less.

how is this chines made shower kit that u had installed any problem leakage or anything ??? it is way cheaper than Moen and delta thx

@FixitAll

3 жыл бұрын

Never heard about problem. Not just this one - All faucets in America market made in China.

@FixitAll

3 жыл бұрын

I would say all what you can see in American stores made in China.

@johnal4560

3 жыл бұрын

@@FixitAll I bought some other sink faucet after a while the top chrome plated part start getting dots on it but I scare of leaking since i do new washroom and scare if i install one and it leaks than i have to remove the tiles that is gonna be costly Is this your own house that you are installing this ? and since you installed it there is no leakage or so ??? Do you have the link for this item thx

@FixitAll

3 жыл бұрын

@@johnal4560 Not my, customers. But they used it and no problem.

@FixitAll

3 жыл бұрын

Here is a link - www.amazon.com/Esnbia-Brushed-Systems-Mounted-Bathroom/dp/B07CZB8KY2

I did a Sunrise Shower looks similar. I ran the pipe for the shower vertically and the threaded drop ear was too deep in the wall. In the instructions they say the ear should be recessed .2 inches which is about 3/16 but if you run it plumb from the valve with the valve in the proper position relative to the wall it is recessed like an inch. If you tilt the pipe forward to get the drop ear to the proper depth then the bar that holds the shower head is tilted down. I bent the pipe forward and then back to plumb. Now the ear is the proper depth but the pipe is proud of the studs. Arrrgh! I need a threaded thing with ears and screw holes that is straight and not an elbow but only elbows at box stores and plumbing stores don't open til Monday. Arrrgh! THere are male to female adapter things i could use to bring the pipe back into the wall and the threads for the shower head arm out but not the preferred method. Very good job with the torch. No burn marks on wall in tight spaces. I was afraid to weld so close to the valve so i did the elbows a few inches farther away and took out the cartridge. I got a smaller flame torch after watching you. Thanks for making this video.

@FixitAll

4 жыл бұрын

Thank you so much!

@madashell2

3 жыл бұрын

I had the same problem. I had to buy nipples and couplers to get the extra length. I'm still worried about getting it just right becuase I'm doing tile and if the depth is off at all it won't work right.

@MrBeast561055

2 жыл бұрын

How’s it holding up?

@YOURBOSS

11 ай бұрын

How is that sunrize shower holding up. did you need to change the cartridge?

No explico cunto debe quedar afuera por si floteas las paredes

@FixitAll

3 жыл бұрын

Muy individual. Depende del espesor de paredes y azulejos.

Were is the water hammer?!!!

@FixitAll

2 жыл бұрын

Not important things for the shower.

Hy i im palmbar i need saeting grhoe shwar box Installation

@FixitAll

4 жыл бұрын

And?

why not pex? why copper over pex?

@FixitAll

3 жыл бұрын

Owners choose.

Tiled before mounting ?

@FixitAll

4 жыл бұрын

Tile? Where the tile?

@viajes80

4 жыл бұрын

Fix it All , I just notice that the shower kit need to be installed before tiling the wall, there is some Allen screws that it can’t be accessed after tiling...

@FixitAll

4 жыл бұрын

@@viajes80 yes in my video its installed before tile.

@viajes80

4 жыл бұрын

Fix it All thank you

all the videos I have seen in the comments they have manual issues with wall thickness measurements

@emmanuel7899

3 жыл бұрын

Especially the drop ear 90°

@FixitAll

3 жыл бұрын

First what i do - assemble all/whole parts together on the valve - face plate, handle, knob and check where is they and how deep sit. Than add wall HardieBacker board thickness and tile thickness + 1/8 tile glue/mortar. Now you know how far to step the valve box from the studs. Done.

@emmanuel7899

3 жыл бұрын

@@FixitAll yes thank you I saw your video and help me a lot. Is for a client that I have, is first time I see this kind of valve they did tile already tomorrow I'm going to cut drywall and make adjustments

@emmanuel7899

3 жыл бұрын

@@FixitAll you have my like and subscription I have some plumbing videos in Spanish thank you so much.

@FixitAll

3 жыл бұрын

@@emmanuel7899 Glad it helps you, Thanks !

Hola podrías comunicarte conmigo, necesito instalar una llave iguala esta del video uno tengo quien me lo haga, vivo en Miami, por favor ayúdeme.

@FixitAll

2 жыл бұрын

I live in Seattle area.

What brand valve is that?

@FixitAll

5 жыл бұрын

I post it in descriptions under video.

@apex007

5 жыл бұрын

@@FixitAll sorry. Never look at description

@BlahBlahManYeah

5 жыл бұрын

chinesium, there are tons of the on Amazon with variety of names. Feature wise seems similar to some of x7-x10 times expensive Grohe sets.

@apex007

5 жыл бұрын

@@BlahBlahManYeah the rectangular design made me think of grohe, but it looked way cheaper. I believe the grohe ones are much larger.

@lopee161

5 жыл бұрын

@@apex007 I bought one from amazon brand name is Sunrise seems well made works great and the packaging is amazing someone made an unpacking video check it out at kzread.info/dash/bejne/ho2ho859lsfInZM.html

The installation was solid but what sux about this system is that the square housing where the cartridge installs doesn't rotate so you MUST ensure that is aligns with the tile direction once the tiles are installed over the plumbing and the estucheon plate is installed over the assembly. That seems very short sighted by this manufacturer. I had this installed in my home and it can't be fixed without ripping out the tile. That is totally unacceptable. I've designed a workaround but it requires that I get a custom estucheon plate created. ugh.

@FixitAll

Жыл бұрын

Usually manual book says the approximate distance to the finish surface. So, you must know the wall and tile thickness before installation of the valve box.

It’d been helpful if you did talk though

@FixitAll

2 жыл бұрын

I don't know what to talk about here. How to spread the paste and how to solder? It makes no sense to give any dimensions because it is very individual when building and using different wall thicknesses and tiles.

Sitan bricole

@FixitAll

Жыл бұрын

Thanks for visiting my channel!

bad design. great skill saves the whole video

@FixitAll

Жыл бұрын

Thanks for the view

Евро смеситель.

Horrible

👎

@FixitAll

2 жыл бұрын

Owner really love it.