Info Edit: At 31:40 Jon is explaining how to adjust the Quickie Pushrods and says to do "24 flats or 3 full rotations", the correct adjustment is 24 flats or 4 full rotations.

@raymondbattle4394

3 жыл бұрын

P

@christianjacob2465

2 жыл бұрын

I dont mean to be so off topic but does someone know a trick to log back into an Instagram account..? I stupidly lost the account password. I love any tricks you can give me!

@elijahroman170

2 жыл бұрын

@Christian Jacob instablaster ;)

@christianjacob2465

2 жыл бұрын

@Elijah Roman I really appreciate your reply. I got to the site thru google and Im in the hacking process now. Seems to take quite some time so I will reply here later when my account password hopefully is recovered.

@christianjacob2465

2 жыл бұрын

@Elijah Roman It worked and I finally got access to my account again. I am so happy! Thanks so much you saved my account!

I have accumulated all of the S&S parts to completely rebuild/renew the cam chest on my 2004. I really appreciate these how-to tutorials. I will be assembling and installing these parts in the next few days. You can damn well bet I will have my smartass phone beside me every step of the way. Thanks again.

@daisy8luke

Жыл бұрын

How did it go? I'm about to do the dame thing to my '99 Dyna Super Glide.

I just installed the S&S 509C cam chest kit ... I used this video as a guide... Took the bike out today, what a difference. I also used a Daytona Twin Tec tuner... runs awesome!

@SSCycleInc

3 жыл бұрын

Love it! Any pics of the install? Send to socialmedia@sscycle.com We'd love to feature you on Facebook!

@damienacosta5178

2 жыл бұрын

Which bike do you have? How does she run?

@markwickard7822

Жыл бұрын

@@damienacosta5178 I installed the pump, chest and cams in my 03 Twin cam 88 - Electra Glide ultra classic.

Thanks so much for the video. The instructions had me worried. This was my first time doing that job and i wanted everything to be perfect.

I'm installing tws woods 555 cams and s and s push rods and inner cam bearings this off season on my 07 heritage classic very informative

this was a FANTASTIC video. Explained well, demonstrated what needs to happen . . . Rock On! I'm a subscriber!!

@SSCycleInc

Жыл бұрын

Glad you found it so helpful!

Best video of this install!!

Very informative!!

Thank you great video.

Great job great video has to be one of the best tutorial videos on the cam chest I've ever seen great job I have fueling setup gear drive with 37 Andrew cams. I do have a diesel sounding motor. sounds like a Cummings when it gets hot. Been like that since he put the cans in never knew gear drive would be loud.

@fernando3551

Жыл бұрын

Yea, I agree! I've seen other videos, and didn't know about the hidden details covered on this video! Excellent job explaining it all! I liked and subscribed!!

@SSCycleInc

Жыл бұрын

Thank you! Glad you found our information helpful.

Really enjoyed information thanks

@SSCycleInc

2 жыл бұрын

Glad you liked it!

Excellent instructional video

@SSCycleInc

Жыл бұрын

Thank you!

Awsome video. Cheers.

I’d use gloves! But man a ton of information from this video! Thank you

Thank you for this explication !

@SSCycleInc

2 жыл бұрын

Happy to help!

Very good job 👍

@SSCycleInc

2 жыл бұрын

Thank you very much!

Was an aftermarket oil cooler installed on the dyna some recommend it?

Great video

@SSCycleInc

2 жыл бұрын

Thank you!

Can I use stock pushrod tubes, with the quickee pushrods on the 107 M8?

S&S Cycle... awesome video. Very well explained. My manual says to use the tapered centering screws that screw into the tappet block (2 of them across from each other) while the other two bolts are installed. Then remove the 2 tapered centering screws and install the last two bolts and then torque to spec. It says that step is to make sure the tappets (lifters) do not hit the tappet block when they come up into it. Is that step not necessary or needed??

@martinwall7297

Жыл бұрын

have them use them, the manual says so you won't go wrong that way.

Please tell me what is the mechanism inside the camshaft for?

Awesome video.My question is I have a 2005 Soft Tail Deuse the motor is stock and has only 10400 miles on the odometer.It has EFI.what size cams and cam plate set would you recommend for a upgrade and would I have to get a tuner from changing the stock cams.

@SSCycleInc

3 жыл бұрын

Hey Robert, a lot of factors go into choosing the right cam for you. How do you normally ride, solo or two up. Do you ride mainly highways, city streets, or twisty mountain roads? Where do you normally shift in the RPM range? Check out this page on our site for more cam info: www.sscycle.com/tech-info/cam-specs-overview

Today I watched another video where a guy is disassembling to replace the cams, and he pulls the tappets up to show that the hole was facing outboard away from the engine. Could it be that someone before him reassembled the bike incorrectly? And would it still run ok like that ?

TOP DEAD CENTER of compression stroke right? How do you know it is on compression stroke?

@S&S Cycle, Inc I am getting ready to install this kit on my 2000 Softail Nightrain. I was wondering if I will be required to do any head work with this kit or if my stock heads and valve springs would be sufficient? Thanks in advance!

@SSCycleInc

Жыл бұрын

So long as you chose a set of bolt-in cams you should not require any headwork. You can confirm that your cams are bolt-in friendly here: www.sscycle.com/tech-info/cam-specs-overview

I have an 04 Low Rider, all stock w/SE slip-on dual exhaust. I would like to upgrade the cam chest to hydraulic cam chain tensioners w/ upgraded oil pump while still using stock cams. Secondly, what type of inner bearings would you suggest to go with? Lastly, does the S&S plate come with Timken bearings? Thanks.

@SSCycleInc

Жыл бұрын

If you are going through the trouble of opening the cam chest to replace the plate and pump, there's no reason to not do the cams as well. We recommend you check out this link: www.sscycle.com/2004/Harley-Davidson/Dyna-Low-Rider-FXDL/?hawkoutput=custom&searchId=ff2f72ca-a25a-4dd0-81e2-3f7974233a77&category=1%7cCamshafts#category=2%7CCamshafts%2FComplete%20Cam%20Chest%20Upgrade%20Kits

Do you have part number for spacers pls?

When you installed the lifters you put the oil hole facing the engine,I've done cam swaps twice and both bikes the oil hole was facing out from factory. Does it matter? Is that what s and s recommends?

@edud8452

Жыл бұрын

Just tore down a 99 twin cam 88 that has never been into and the lifters had the holes facing each other. It must not matter much I think the oil channels around and finds its way into the holes.

Would have loved to see how you removed and replaced the cam bearings, special tools etc.

@SSCycleInc

2 жыл бұрын

That's a good point! Our friends over at J&P have another Power Package video that shows this process, along with the specific tools for the job. You can check it out here: kzread.info/dash/bejne/iKmJz69tnJiYdrQ.html

Where can we get video 1

I just installed an S&S 551 Cam kit in a 2011 103 FLT (Road Glide) The kit did not have any instructions for the pushrods, (S&S Quickee) So I went on KZread and found 2 videos that both said Zero Lash and 20 Flats, Is that going to be a problem? Also in the kit there was a button head allen screw 1//4" NC by 1/2 inch long in a cellophane sealed bag, I can't find anything in the instructions indicating it's use and I can't see any open holes? Am I missing something?

@SSCycleInc

3 жыл бұрын

That pushrod adjustment procedure sounds correct. As for the screw, some early 1999 models would use that screw to block off a chain oiler boss, this is not needed for your 2011 FLT.

I noted that after you finished torquing down the chain tensioner, the dots of the chains were no longer aligned. Did you install them this way?

@SSCycleInc

3 жыл бұрын

We did not, we adjusted that off-camera. In the next shot where you see the face of the cam plate, you can see the cam dots are realigned. Good catch!

@kennyirish5021

2 жыл бұрын

Yea eactly! I said to myself..Wait a minute you never talked about realining cam marks.

What size engine does this kit fit ? I have a 02 Dyna lowrider 88ci engine.

@SSCycleInc

3 жыл бұрын

www.sscycle.com/feature/performance-kits/power-package/100-110-power-package-big-twin

About to put this power package on my 2016 street bob, very curious to see what kinda numbers this will put down.

@dylanpetro

4 жыл бұрын

Hey did you install it? How you like it?

@fastz24

4 жыл бұрын

dylanpetro yup got it back a couple weeks ago, haven’t ridden it yet but it sounds incredible.

@Ozzy2341

3 жыл бұрын

fastz24 hey how does the bike ride? hp numbers ? Did you like the S&S kit or would you of chose otherwise?

If I put a S&S 570 cam, cam plate and oil pump in my 2014 Heritage do I need to change out the push rods?

@SSCycleInc

3 жыл бұрын

We do recommend swapping out the pushrods as well as the lifters. If you are already planning on the cam, plate and pump you should look into our Cam Chest Kits that come with everything you need. www.sscycle.com/2014/Harley-Davidson/Heritage-Softail-FLSTC/#category=1%7CCamshafts

I bought the kit and it comes with a small individually wrapped screw. What is this for? I've checked the instructions front to back and can't find where it belongs. I've also called your service desk but the lines are always busy.

@SSCycleInc

3 жыл бұрын

Fills hole for chain tensioner when using gear drive (tensioner is not used)

A buddy of mine is looking for this cam kit for his touring twin cam but wants to know the best streetable cams because he rides long distances. He wants the s&s kit. Any information would gladly be appreciated

@SSCycleInc

2 жыл бұрын

The "best" depends on how he rides, what's been done to the bike, and what he plans on doing. When he rides long distances is it highways or backroads, is it two-up and fully loaded down or solo with just an "essentials" bag, lots of factors to consider. Have him send us a message on his favorite social media channel, or drop us an email to sstech@sscycle.com and we'd be happy to help him get the ideal set up for him!

How bout a video explaining this same procedure on an 05 Harley 88 vtwin? That would help immensely. Not sure how cams go because I dont' have that big washer. Just a smaller like sleeve.

@SSCycleInc

Жыл бұрын

This is an '06 88" (it just had our 100" Big Bore Kit installed in part 1) so your process should be very similar. If you run into any issues don't hesitate to reach out to our tech team with a detailed email at sstech@sscycle.com!

I have a 2019 Road King 107 M8 and would like to do a Cam Chest Kit. Which one do you recommend for my bike (I see multiple choices on S&S website) and do you have a certified mechanic shop in 85258 you cold also recommend? Thanks!!

@SSCycleInc

2 жыл бұрын

Hey Robert, we would recommend the 465 for more around town riding (low end torque) and the 475 for highway speeds (horsepower). As for a shop near Scottsdale you have a lot of options! Try Black Canyon Motorworks and talk to Scot.

@robertcurtis9449

2 жыл бұрын

@S&S Cycle, Inc You guys rock! Thanks for your advice and input. I am more of a ride around town guy vs pounding out hey miles. I'll give Scot a shout as well. Thanks Again!

@SSCycleInc

2 жыл бұрын

Happy to help!

Hey S & S, I am considering the 100" Winter Power Pack with silver cylinders, chain drive, and 585 easy start Cams. My bike is 2005 FXDC Superglide Custom carburated with 35,000 miles. 2 into 1 red thunder exhaust and a DK customs Air cleaner kit. I have a more aggressive riding style. Do you think the 585 is a good cam for my bike and myself? I wish you could substitute any cam into the kit as I would consider a 583 or 570. Thanks!

@SSCycleInc

2 жыл бұрын

Hey Damien, that is a great question! If you are already considering the 570 & 583, the 100" power pack with the 585 will be your new best friend. Based on our experience with the 88" to 100" swap and a very heavy throttle wrist (that more than one of us might have) the 585 is absolutely the most fun, reliable, and fitting cam to pair with the 100" kit. We would not hesitate to recommend that kit for your specific setup and riding style.

@damienacosta5178

2 жыл бұрын

@@SSCycleInc Thank you for responding! Do you think I will feel at all sluggish down low?

@SSCycleInc

2 жыл бұрын

If you weren’t doing the 100” kit then it could be a bigger concern, but with the added cubic inches you shouldn’t notice it lugging or feeling sluggish. That said, this is a very big change from your current engine so you may have a small learning curve of figuring out all the quirks of the new set up, but nothing that laying down some miles won’t clear up!

@damienacosta5178

2 жыл бұрын

@@SSCycleInc Okay awesome. I ordered the kit and I have already removed my gas tank. ⛽

Is this the same instructions for the 103 0925-1104 cam kit?

@SSCycleInc

Жыл бұрын

Nearly exactly the same, with the exception being that we used chain drive cams and that specific kit is for gear drive cams.

Hola ustedes dan clases de macanuda H D ?

😁👍❤️

you have beautiful hands lololololo. great video brother!!

does exist a kit to make 110 from 96?

@SSCycleInc

Жыл бұрын

Absolutely! You're looking for the 110" Power Package, which just recently went on sale! Check out www.sscycle.com for more info!

Is it 3 or 4 full rotations of the nut ? 😅

@SSCycleInc

2 жыл бұрын

The initial adjustments for the Quickiee Pushrods should be 24 flats or 4 full rotations, Jon accidentally says 3 full rotations in the video.

Didn’t show the technician rotating the rear wheel when aligning the oil pump during the torque sequence. Maybe someone was doing that out of camera view.

Should you not take the time to measure the crankshaft runout first?

@SSCycleInc

Жыл бұрын

It's definitely a good thing to check, and a requirement when you're running dear drive cams.

@deniseclark2639

Жыл бұрын

Probably 2 inch per rotation D T I not available E A C

Very good video but four turns is 24 Flats not three on adjusting the push rods

@SSCycleInc

Жыл бұрын

Correct, the initial adjustments for the Quickee Pushrods should be 24 flats or 4 full rotations, Jon accidentally says 3 full rotations in the video.

I have always said Harley Davidson engines are overly labor intensive, their still using 1950’s/1960’s technology even in the Milwaukee 8 with the huge primary chain rotating in oil, pushrods, rocker arms, pushrod lifters , and a hot air cooled engine. I hope the Revolution Max can redirect HD to the modern age their claiming across their entire line.

@LOVE-JC777

2 жыл бұрын

Lot of home mechanics like the old technology keeps them turning wrench’s 🔧 plus they don’t have to deal with high technological levels.

I have a 2000 Dyna Wide Glide FXDWG and I have purchased a S&S cam plate kit includes cams and oil pump, the cams are 510C is there Anyone that is doing a 2000 FXDWG I would like to see one.

@johnfhancock9299

Жыл бұрын

I intend to do it my self.😊

@johnfhancock9299

Жыл бұрын

What year is the bike that you are working on?

@SSCycleInc

Жыл бұрын

This is an '06 Super Glide, the installation will be very similar with your 2000 WG.

Plot Twist: he’s actually using red loc-tite A very former tech at a buddy’s shop did this by “accident” 😂😂

@SSCycleInc

2 жыл бұрын

YIKES!

A LOT OF GOING AHEAD

@mickmccluand4677

Жыл бұрын

I'm an Aussie and not used to hearing that phrase, very distracting; enjoyed the video otherwise.

I would have installed gear cams if I went through all of that and sealed the cam chest up and called it a day.

@SSCycleInc

3 жыл бұрын

Challenge is crank run out. Not all engines can tolerate gear drive cams.

@Jonathan-L

3 жыл бұрын

I wonder how many guys upgrade to a gear driven cam kit, and discover AFTER they open the cam chest that the runout is too excessive ... or worse still, ignore the runout check and bolt in the new gear driven cams on a wobbly cranked motor.