you’re a genius,just saved me so much trouble, i’ll be trying this next week. you’re steps were very helpful and detailed 🙏🏼

Very clearly explained, thanks!

Thanks very much for sharing this information. I followed your steps exactly, and had my remote doors, up and working, within an hour. Ridiculous how inexpensive the kit is. Thanks again!

Great how-to video! Thank you so much for making this, and for the link to the Banvie system!

Thank you for making this video. Just starting a shuttle conversion and want to do this step asap!

Thanks for the video. Very simple and easy to fallow. Great job!

Thank you so much for making this video. There is nothing on KZread on how to do this!

Thanks so much for posting this! This is what I'm totally going to do now.

Dude thank you so much for taking the time to make this video! Exactly what I was looking for, as I am trying to install a remote switch on the doors of my shuttle conversion. haha. super helpful. thanks again.

Thank you i just put mine on and it works like a charm.... THANK YOU!!!

Thank you so much for that how-to and the link, much appreciated

@jtr82369

3 жыл бұрын

also, thank you for all the vids you have done so far, it has given me great details on how these are constructed, your series is one of the best on youtube

Saved me hours and brain cells!!!! Thank you!

Yoooo....salute from Los Angeles 💯 I watched your video and instantly purchased the BANVIE for my E450 🚎 now I’m wonder how to run the wires 🤦🏽‍♂️

THANK YOU SO MUCH IT WORK GREAT !!!!!!! I LOVE IT

Great helpful video! do you still have the bus? if yes, where is the power coming from to feed yellow and white next to red and green? could you show what door switch and relay outputs for this door ? Thanks !

great video

@dustinsearer5228

5 жыл бұрын

Thanks! Are you planning on doing anything similar on your bus?

@robertbraden3889

5 жыл бұрын

@@dustinsearer5228 yes I am, exactly what you did! Thanks

Thank you very much for the video, I already bought the Banvie system. Are you able to use the only remote, or can you still use the regular door switch?

I wonder if i can convert my manual bus doors to keyless entry.. it doesn't have a motor

Hi, I also have a shuttle bus conversion and am thinking of switching my current key fob to this, actually I have already purchased from Amazon. My current fob does not allow me to use the open and close polarity button existing on the bus. I can only open and close with the key fob. So it would be inconvenient for passengers with no fobs and as well having to carry the fob to open and close at all times. Also it doesn’t work smoothly like this, I have to push both buttons for it to open or close. 🤔

Did the origin; door switch work once you spliced in?

The red wire is power for the door motor. It has to be hot all the time.

I wired it up as described and it is not working correctly. If the door is fully open or fully closed and I push the remote (either open or close depending on which way I want the door to go) it opens (or closes) for a split second and then stops. I did those little pins so it will run for 5 seconds. Any other ideas on what I'm missing?

Great video and my bus door controls and gears looks just like yours BUT! My bus is Ford F550 even though it looks just like yours it did not work? Help

Thanks for the great video. I actually have the same exact door on my bus as you so I thought this would be flawless. After wiring it all up (except to my 12v battery bank, not to my car's battery) I soon realized that every time I close the doors with the FOB, after 5 seconds the door automatically opens back up again! Tried many things and just cannot get the doors to stay shut. Any feedback would be appreciated.

@framusfilms

3 жыл бұрын

PROBLEM SOLVED! When I originally wired this, before disconnecting any wires I had the doors in the OPEN position. I believe this was my issue. I rewired everything back to the original setup, put the doors in the CLOSED position, and wired this up just as described above and it worked! Hope this helps anyone else having this issue.

Great video! Still adding value. I bought a different key fob and it was small could not get it to work. Saw another video on this key fob and it was confusing. Yours was spot on. Question: Did you have a switch by the dash and did you disconnect/ bypass or can you still use that switch?

@dustinsearer5228

Жыл бұрын

Hey. Glad you found it helpful. Yes, we had the switch on the dash and it still worked. We just spliced into those wires without disconnecting them. So we could open the door with the dash switch or the fob.

@prepparig144

Жыл бұрын

@@dustinsearer5228 Awesome!! And appreciate the quick response. That was definitely what I wanted to hear. I tried putting a fob receiver in right at the switch location so I can still use it, but wires didn't match up.

what battery does it connect to? is there a battery up there with the motor? or is it talking about the engine battery? or the batteries that are powering the rest of the bus?

@dustinsearer5228

3 жыл бұрын

We first connected it to the starter battery for the engine but then realized that would drain it and could strand us. So we rerouted it to connect to the batteries connected to our solar set up which powers the rest of our build.

This ended up much simpler than some of the other mods. How is it working for ya now? Anything you would do/have done differently?

@dustinsearer5228

Ай бұрын

Initially we connected it to the main bus battery and very quickly had a dead battery. So I would say to reroute the power to the batteries of you solar system at the start. Good luck with your build!

So I followed everything everything on this video to the T. But every time I activate my wireless key fob, my fuse ends up going out.is there any other alternative I could try? I followed all different options on the manual but still no luck.

@DeliberateNRandom

Жыл бұрын

Wired wrong? Either the device is trying to draw too much power, or something is shorted. I would cap the unused wires, because they could short out.

Help. I wired up and it "works" for about 2 seconds and then it pops the fuse in the panel. Replaced fuse multiple times and checked wiring. Any suggestions?

@Figontheroad

Жыл бұрын

Ground issues?

Hey! I'm trying to do this with my bus but I can't figure out how you were able to connect the power cords to the 12v battery. Any help?

@dustinsearer5228

4 жыл бұрын

miles angelo in the video we just spliced it into the power cords that were already going to the door. We later changed it to go directly to our deep cycle batteries that are hooked up to our solar to make sure that it wouldn’t drain our starter batteries.

@milesfinnegan6015

4 жыл бұрын

@@dustinsearer5228 great to know, thanks so much for responding! I was also wondering, how did you figure out which cord was which (power, lock/unlock, ground)?

@milesfinnegan6015

4 жыл бұрын

@@dustinsearer5228 my bus system is similar but not the same, so I'm having a bit of trouble figuring out what goes where haha.

@dustinsearer5228

4 жыл бұрын

For sure. We used a 12v test light like this one. www.amazon.com/OctagonStar-Circuit-Systems-Continuity-Voltage/dp/B01HUZPTPS/ref=mp_s_a_1_6?dchild=1&keywords=12+volt+test+light&qid=1594125377&sprefix=12+volt+test&sr=8-6 And used it to see which wire had power all the time (positive power) which had power when we hit the open button (open) power when we hit close (close) and which never had power (negative/ground). Good luck! :)

Tried to wire mines today. This is my second attempt. Doesn’t work. 🙁

so the doors will work without the vehicle key in the on position or vehicle started???

@dustinsearer5228

5 жыл бұрын

Yep. That way we can use it as our normal entrance so we don’t have to climb over the driver’s seat every time.

@TheAmericanWanderer

5 жыл бұрын

@@dustinsearer5228 thanks.... I have an outside key slot to open my doors from outside, but if Im in side and want to go out, I have to duck down and go turn the key on inside to get outside.. so will be getting one. Im working on a 2007 shuttle now... if your interested in taking a look at my boring channel I would appreciate it.. thanks

@TheAmericanWanderer

5 жыл бұрын

was that the KS020 or the KS021? thanks

@dustinsearer5228

5 жыл бұрын

The American Wanderer we used the KS020

Do you have a Facebook?

Great video and my bus door controls and gears looks just like yours BUT! My bus is Ford F550 even though it looks just like yours it did not work? Help

@maybeitscozy9113

Жыл бұрын

Same here. I have a f450 shuttle bus. Didn’t work. Same wiring. I do however get a red light on the bus motor box. 🤔