I can't thank you enough for this. I just bought my first home and I am currently trying to make my house more accessible for my mother when she visits/to encourage her to come visit by making it as comfortable as possible!

Brilliant! I've got a disabled Mum who's having trouble accessing the toilet. These hinges are gonna help heaps. Thanks for showing this! Love your channel.

I went to Amazon first to see if they had these. It only had a picture of the hinge. So I decided to come here to see if someone might have done a video for them. Well here I am 😅. Great job in every aspect. I felt like you were an online personal instructor. I don’t think you missed a thing. Ty 👍🏻👍🏻👍🏻

@EquipMeOT

Жыл бұрын

Thank you for the kind comment! I’m glad it was a helpful video! Love these hinges!

Thank you so much for the brilliant video. It's the only one I found with such installation details and specially the headache saving tips. Luckily my 2-hinge bathroom door opens/hinges on the OPPOSITE door frame/jam and the pin faces up after installing 2 separate hinges from Amazon. But one should be able to remove the pin before installation, install the hinge plates separately, and finally reinsert the pin the right way. Alternately, you could pop the pins out AFTER full installation but make sure you shim the bottom of the door securely against the floor FIRST so that the weight of the door doesn't damage the jam at the bottom after removing the top pin. In my case, after installing the new hinges, the door got shifted (by one thickness of the hinge plate) towards the frame and it would NOT close at the top. I had to first shim the door against the floor, remove top hinge from the frame/jam, chisel out about 1/8" of material from the TOP hinge cutout/pocket, and reinstall the top hinge with the provided 3/4" screws. The door now closes perfectly but the distance between the frame/jam hinge and the free end of the door has now increased by almost 3". This causes additional stress on the TOP FRAME HINGE, when the door is fully open, with a heavy door or if someone pushes down on (or hangs someting heavy from) the door handle. This is fixed by replacing the 3/4" MIDDLE screw of the top hinge (or the screw or screws closest to the edge of the hinge) with a 2.5" or 3" long screw so that the hinge now screws into a stud instead of just the door jam. The longer screw should be inserted AT A SLIGHT ANGLE towards the center of the door jam to ensure that it engages a stud. The screw head will no longer be flush with the hinge plate and it may protrude a bit but this does NOT interfere with fully closing the door. As a precaution I also replaced the middle screw of the BOTTOM hinge in the same manner. The door now opens and closes solidly and it provides almost 2" of additional clearance. All that for less than $25 in materials and about 1 hour of labor.

Great information and great video. I am an occupational therapist and Southwest Wisconsin doing Home care in private practice. I used your video to help me the other night when I was installing some of these for a client.

@EquipMeOT

Жыл бұрын

That's awesome! Glad to help!

I appreciate you. We had slight hiccups but this video made it easier.

I agree with the comments. I’m tackling this project this weekend, and I couldn’t ask for a clearer set of instructions. The tips you gave for this are superb. Not only do they answer questions I was having, but are likely to save me hours of frustration. Thank you!

Wow. Thanks so much for your video. I knew I would be able to do this as all my sisters call me handyma'am, however I am especially thankful for the advice of putting the hinge to the door first! Saved me time. Was a very easy install as all the hardware was the same size.

Thanks for making this video! Nothing like having you make the mistakes for us, ie door first, frame second. And yeah your teeshirt says it all!

Thank you for making this clear, informative and wonderful video!

Thank you for showing this!

Excellent and thorough explanations with very clear video of installation and final function.

Omg😅, ty so much for posting, helped me do it right the first time, usually I try several ways to do projects

Thank you. Followed your instructions and got them installed. The extra width was a big improvement.

@EquipMeOT

Жыл бұрын

Yay! Glad you were able to install!

Very useful and informative - it's given me an idea to solve a problem. Thanks for taking the time !

@EquipMeOT

Жыл бұрын

You’re welcome!

Thanks and wouldn’t have known about this simple option.

Love this! Gonna be doing this on all the doors (bathroom and bedroom) in my mother’s house.

@EquipMeOT

Жыл бұрын

Great idea! It makes a big difference!

Thanks - very helpful

Excellent tutorial! As an RN I have done teaching of complex topics for the public for years. It is not easy to distill key technical points and cautions. To explain a thing simply one must understand it well ---you did a great job.

@EquipMeOT

7 ай бұрын

Thank you so much!

YES! Thank you! I did it!!!

@EquipMeOT

Жыл бұрын

Yay! You’re welcome!

Thank you. This video helped me immensely.

@EquipMeOT

4 ай бұрын

You're very welcome!

Excellent content, thankyou.

Really good your video, I had no idea how this works, thanks

@EquipMeOT

Жыл бұрын

You’re welcome!

Thank you for your video.

Also when putting your screws into the old holes, put a tooth pick in it . Keeps the screws from stripping

Thanks it was a great video

Great video and recommendation! I saw you post about these hinges on IG earlier and I've converted 2 out of 5 doors. We will save thousands of dollars - thank you!! And I messed up a few times on my first install too. One tip I find helpful when installing by myself is actually to remove the pin from the hinges, screw the pieces on separately, then line up the door and reset the pin. I also had trouble getting the door to latch closed so I removed the trim on the inside doorway for a tighter fit, then reinstalled smaller pieces around the hinge. Thanks again!

@EquipMeOT

Жыл бұрын

Glad they worked for your needs! Those are helpful suggestions, thanks for sharing!

@PongoXBongo

Жыл бұрын

I did the pin-popping trick too while helping a friend install these as he's now in a wheelchair after an accident. I laid the doors down in the ground so he could install the door-side of the hinges while I installed the frame-side of them. Made short work of an entire hallway's worth of doors like that.

great offset hinge video

@EquipMeOT

Жыл бұрын

Thanks!

Very helpful!

@EquipMeOT

Жыл бұрын

I'm so glad!

So many handymen dont know anything about these. My dad just moved into AL, bedroom doorway too small. I had to order these and install them myself.

@EquipMeOT

10 ай бұрын

So true! They should be the default in AL facilities!

Great video, how does this work on a door that swings the opposite direction? Is the 'bulky' part of the hinge always on the side which the door swings into? If so if the door swings toward the room opening (like a closet), would the bulky part be on the room side (always in view)?

No wheelchairs in my house (yet, knock-on-wood), but these look ideal for widening a garage door for ease of garbage bin and wheelbarrow access.

Fantastic! Tyvm!!!!

@EquipMeOT

Жыл бұрын

You’re welcome!

@peacefulpear8

Жыл бұрын

@@EquipMeOT I have questions. It seems to me using this would push the door back, closer to the wall. Would the door knob then be in the way? Also does it cause the door to swing out at a longer length than it originally would with normal hinges?

Just one thing, i learned this the hard way. I assume it applies to all hinges. there are two different curves to the plate. The larger curve ( featured here) will fit in the door if the smaller curve was used prior ( see the gap where the door and frame was rotored ), but not vice versa.

@trsnb

7 ай бұрын

What curve are you referring to?? What is curved? Is that why there is a mark that she mentioned??

I have a quick question: Do you think that this was the correct size hinge? I noticed when looking on Amazon that there are hinges that will fit either the 1-3/4" or the 1-3/8" door - but the one in your links states that it will fit BOTH sizes... so it MUST be larger that the one that fits a 1-3/8" door... this may be why at 04:35 you can see such a wide offset before the angle that would normally fit against the edge of the door...

I have a question you might be able to help me with i want to leave the sliding doors i have but put hinges on the doors are these special hinges?

Will this type of hinge allow the door to open 180 degrees?

I do have a wall that the door swings against. So what's the clearance do you need for your hinge. (how close can the wall be?) Also how far does the door shift INTO the room since the interior door knob will hit the wall when I swing this door open all the way but the bathtub is close like 4-6 inches.

@EquipMeOT

Жыл бұрын

You'll need 3.5 inches of space behind the door to accommodate the hinge and the door width.

@sharondipitous38

Жыл бұрын

​@@EquipMeOTHi. Is the 3.5" beyond the frame or can you include the frame?

@bogusemail4781

9 ай бұрын

@@sharondipitous38 I think she means to measure the distance from the "inside" of the door (in the 90-degree open position) to the wall and you need this to be at least 3.5". So, it would seem that it doesn't matter how wide the frame is since it would be out of the way in the new open position after installing the offset hinge. But if you have a door knob that sticks out more than 3.5" then that is a problem. Or if there is a towel rod or rack on the wall then you need to account for that too. Also, the swing side of the door may move closer to the frame (by an amount equal to the thickness of the hinge plate material) so it may be a tighter fit when closing the door or it may not close at all. Best to do a dry fit first before removing or drilling anything.

Are the hinges supposed to hang upside in your video?

@joannaleventisnoonan2076

Жыл бұрын

I mean the pin

Hi. What is the link to these hinges on Amazon?

@EquipMeOT

Жыл бұрын

amzn.to/3NGHAE0

Hinges is installed upside down. The pin for a hinge always faces up. This was the wrong hinge for this application. A hinge installed with the pin facing down leads to the pin falling out over the years.

@bogusemail4781

9 ай бұрын

I can confirm that the hinge pin faces UP for a door that opens/hinges on the OPPOSITE side of the door frame from the one in the video. Alternately, like someone else here suggested, maybe the pin can be first removed, then the hinge plates can be installed separately on door and on frame, then the pin can be reinserted the right away. Can also remove and reinstall the pin after the fact but it requires some care and planning to avoid damaging the door jam due to the weight of the door. I would shim the door bottom first, then remove the bottom pin, reinstall it, remove and reinstall top pin.

All my interior doors have 3” hinges, ain’t I lucky?

While you had the door off the frame, this would be the time to cut the bottom of the door about 1/2 min, and why? Now the bloody door will clear the carpet you should also have in the bathroom.

Why not lay it on its side so you don't have to reach up like that since it's already freestanding? It'd make everything easier. With that said, I'll be going to the store today. Lol

@EquipMeOT

Жыл бұрын

It was nearly impossible to film it in our super narrow hallway, and I couldn’t lay it down on the space easily. It’s def an option though!

Has the pin on the top hinge fallen out yet? Or did you correct your installation after posting the video?

O.K. could have been a 2 minute video, too many breaks.

@EquipMeOT

Жыл бұрын

It takes more than 2 minutes to install new hinges on a door. I like it to be realistic for those doing it at home.

A man would have taken the pins out first and it would have been faster and easier

@dylanmoore7466

Ай бұрын

Its almost never easier to do that when you are replacing the hinge to begin with. Redundant step. Stop being a pitiful misogynist

What? get your man to do that and make him a sandwich. Gender roles are key to a happy relationship.