How To Install Madjax 6 inch Lift Kit For Club Car DS | Complete Guide
Тәжірибелік нұсқаулар және стиль
This video covers the complete installation of the MadJax 6" A-Arm lift kit for the very popular old-school club car DS. This model happens to be a 2001 but the installation process is the same on all of them. Please make sure to visit Golf Carts Modified (golfcartsmodified.com) for all your cart parts. I would not have been able to bring this youtube series to the channel without the expert help of Travis, Ryan, and the team at GC Mod.
Video of how to pack hub bearings: • How To Pack Hub Bearings
Video on how I removed the stuck shackle bolt: • How To Cut A Siezed Sh...
Video on how I installed the steel dust caps: • How To Install Metal H...
Link to the lift kit I used: golfcartsmodified.com/product...
The leaf springs in the rear: amzn.to/3XqRL2h
Tie Rod Ends: amzn.to/42ZWR6G
New front hubs: amzn.to/46janFx
Rack and pinion I used: amzn.to/3r06Hbw
Steering knuckle: amzn.to/3PMp12r
Nice set of four shocks: amzn.to/3PqG1uR
Impact socket set I use: amzn.to/3JwJPqr
Пікірлер: 19
Your music always heals. It has been a major support system for me while I've been tackling and overcoming some mental health issues since 2011. Thank you for doing what you do
Nice work. For those installing in the future, don't apply the lock tight until you fully assemble with tires installed and check the tire camber. I've installed a dozen of these, and the majority of them need camber adjustments with the heims. Once camber is level, secure your heim, back out the allen key bolt, and apply your lock tight, re tighten. Cheers.
Great video! Can't wait to see it finished.
Nicely done and thanks for sharing your work. I'll be picking up an old 6 seater Club Car today and the suspension will be the first mod/upgrade. I'll be revisiting this video when the time comes. Now to read your discretion and check out the links.
Since you had bad bearings, maybe ordering the kit for plastic cap hubs (sealed bearings) would be better?
Any chance for a video showing how to adjust the suspension/alignment after installing the lift?
Awesome video! Thanks
FYI good fastening practice for bolted joints is to have at least 2 threads exposed past the nut. Also the nylock feature of the nut is not touching the bolt threads.
No comment on the drag link removal/reinstallation when changing out rack and pinion? That thing was a nightmare
After installing your wheels and tires did the lift cause the cart to have a raked rear end? I just did one and the rear is like 1.5' taller then the front.. but does not seem to be a common issue ive seen with others?
My hiem joint lock nuts did not thread on
Why are all the kits hiem joints. They wear out and freeze up.
What year is this club car DS?
Alignment Vid?
When you took the bolts out (10:24) , the threads were up... but you put them back with the threads down (14:35)
@Archifx
5 ай бұрын
It doesn’t matter. Either way you can get them to fit. It’s just tensil strength
@donaldfennell971
5 ай бұрын
Original they come with the threads down.
Golf carts modified is ok. All i see are Precedent parts and no way to sort anything for model or year.
Bigger hammer