How to Install Led Fog Light on a Motorcycle (with Relay and Fuse)
In this video we are going to show you how to install led fog lights on a bike.
SONG CREDITS:
Track: K-391 - Earth [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • K-391 - Earth | Drumst...
Free Download / Stream: www.hive.co/l/u8ke
K-391
• / k-391
• / thek391
• / k391
• / thek391
Track: Cartoon - On & On (feat. Daniel Levi) [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Cartoon, Jéja - On & O...
Free Download / Stream: bit.ly/cartoon_onon
▽ Follow Cartoon
SoundCloud / cartoonbaboon
Facebook / cartoondband
▽ Follow Daniel Levi (vocalist)
Facebook / daniellevimusic
Website daniellevi.eu/
Пікірлер: 358
I don’t have leg guards on my bike. Very well explained and produced. In English too ! Bonus. Thank you.
Bro, love your work!! I also use heat shrinks and connectors and I hate splicing cables, and I also put up fog light by this same method, I then watched your video to confirm my technique whether it is right or not. Amazing video, professional work!!
I was going through the comments and Imran Khan has said exactly what i had in mind. So I share the same thoughts as below!! And i subscribed because you deserve it!! I really like this video. The music is on point, you look like you know what you're doing and the slides are just out of this world. You must have put a lot of effort into this. This is the way to do you tube vidz, like it was your LAST! Keep up the good work
Very very neat work!! Was looking for the exact setup with relay and fuses... Good job !!
Great how to video, thank you sir.
Really enlightening, after many relative videos with too much "noise"! Far more superb presentation and diagrams!
I really like this video. The music is on point, you look like you know what you're doing and the slides are just out of this world. You must have put alot of effort into this. This is the way to do you tube vidz, like it was your LAST! Keep up the good work
@zainhussein1975
3 жыл бұрын
Very well said Imran!! Infact I had to copy paste your comment because i shared the sentiments to the letter!
good job buddy, no problem why this video having 600 dislikes from people having for sure no idea of anything. keep it up and greetings from Thailand
very clean work !! and tips are much better knowledge .. better testing before putting back everything together to avoid removing again to find the problem !!
Great Video! Highly appreciated.
Great vid. Thx. Now I can connect my lights properly.
The diagram was really helpfull, nice work budd
Bhaiii ne sahi samjhaya hai kaise lagana hai fogg light baki log direct kar dete hain usme fuse hone ka chances jyada rehta hai
Loved it man professional wiring ❤
GREAT JOB. i WAS ROCKIN TOO
Nice. Clear explanation
Great job!!! Thanks, man.
Great Master tuiturial..more vid sir
Thanks mr Tu diagram yg plg mantap👍
professional level 110%
Very nice, finally some useful diy tutorial. the footage is a bit shaky and hectic, got me quite an effort to see through the hole thing, almost suffered a epileptic attack :)
@tuhinde698
5 жыл бұрын
😁😁😁
I give you a thumbs up for your video. Good directions and the diagram easy to understand
Thanks that's Great observed idea video channel I like this post to learn more
Professional wiring👍
Great job....... Super wiring
Awesome video sir
MAN! AWESOME!!!!
100% clean . Super clean diagram and work! goodjob sir! newly subscribe
Nice brother..simple explanation..great
Very informative! Love the format😊
Órale una instalación perfecta buen trabajo
Esa ensalada pasa cuando los técnicos no son profesionales Hasta para esconder el cable hay que ser ingenioso.
Bro I got everything from your video. Thanks a lot. I've some customisation to do in my bike. I just want to know which mm or guage wire should I use for light works I'm using FZSFI V2.
It's really good.i like it
Very neat wiring assembly. Just avoid more than 10w led fog lights since it could be blinding on oncoming motorists.
Thanks bro
Good video and nice work. I would recommend using a proper electrical crimping tool for crimping wires to connectors.
Awsome work, ❤️❤️❤️
Very useful
The video was prefect ,drawing was amazing ,can you please amend drawing with the relay `s number .it wold be easy to identify which wire connect t the wish side of the relay . thx
Great video! Would you share what auxiliar lights are you using on the video
So nice! Please make a video for car fog lamp connection too similar way
Very good. Your sausage fingers are perfect for this type of activity.
@tuhinde698
5 жыл бұрын
😂😂😂😂
sir natutuwa po ako sa mga ini si share nyong kaalaman sa pag gawa o palalagay ng wiring at pagkokonekta nito a mga dapat lagyan...sir pwede bang mag share kayo ng video sa kung paano iadjust ang starter chain sa my magneto or sa plywheel or kung paano ito babawasan or tatanggalin.thanks and more power.....
Proper wiring bro
Hi Bro, To be honest, this video was crystal clear on installation. However, I have few questions about Fog light Installation and hoping for your guidance on this. I have Fz25, I have already had Fog lamps installed on my bike not sure about the Watts possibly 20 or 30 Watts each now I got another set of 20 W lights each. I wanted to understand if we can install 4 pieces of light on the Bike. Summary: 30W*2= 60W 20W*2= 40W Will Relay help in this case? Or if already installed lights is 20 W each is it fine with below: 20W*2= 40W 20W*2= 40W Awaiting your response. Based on your comment, I will take the next step.
Hi, thanks for the video. If I only install 1 fog light, Do I still need to install it with a relay?
Really helpful video 🤟🏼✌🏼
@Rhydon_46
2 жыл бұрын
Installed on mine as well as my frnds bike bro. Lots of gratitude bro. Only thing was it Took 7.5 hours to complete the entire work. 😅😅❤️
After e long search programme for a DIY wiring harness video for fog lights I have came to your video and it helped me a lot brother thanks for making such a informative clean video and I have decided to make one wiring harness with your diagram only one doubt is which size of cable should I use for this wiring ?
@tuhinde698
2 жыл бұрын
1.5sq mm wire will do
Very nice videos
Relay is for not draining battery I think .all and all great video man .
@_.Dave._
5 жыл бұрын
A relay is used so your not putting high amperage through a switch. Think about about a car stereo or high wattage LED bar. Lets say you're going to have a 30 amp draw, you put in a 30 amp fuse, but how many 30 switches can handle 30 amps... the switch would melt before the fuse. A relay is a switch the uses a very low voltage signal to activate. So the switch you press does turn on the lights,.. its turns the switch on in the relay which in turn turns on the lights.
@_.Dave._
5 жыл бұрын
Oh just thought of this use,.. lets say you don't have one really big draw like a car amp, but lets say you have a couple of smaller draws that collectively are a lot. So for example is you wanted to have one switch to turn of a couple of 4 small fog for a close spread of light and a couple of 25 degree spot lights for far. If you put any one of these lights on one switch, you (might) be fine, but you'd need 6 switches, which would be a real pain to use. Or you use one regular low voltage switch that turn on the relay (switch) that handles all of them at once.
Perfect wiring.
Like the music! Please give link where you bought those wire sleeves, heat shrink, spade connectors and battery. Too hard to get!
Thankyou bhai
gantong klaseng trabaho sana gusto ko pag nagpagawa.. mapinis wiring ndi pagbuhulin lang yung wire tapos electrical tape.. mas maganda tlga ikaw n lang gumawa kung marunong ka ..
thx.
Can you please explain exact fuse amperage you have used in your case with 30amp relay and 36 watts LED lights, waiting for your reply
I have ordered Thimson H4 12v 40a wiring harness for Auxbeam 72w 12" LED Fog lights (bar) for my bike. I don't know how to wire external switch in the harness like you made your own. Please help.
I have bought PnP relay online and installed as per the guidelines but my fog lights aren't on. Any suggestions on how to make it.
Apart from the switch, will I be able to active my aux lights when I press the pass switch for the high beam? requirement: This should not make the high beam come on when I turn on the aux lights. Is this possible? Any help would be appreciated 🙏🏼
Keren..bener nih foglamp itu masangnya dibawah,bukan di atas stang..emangnya mau nyari pocong?hehe
@tuhinde698
6 жыл бұрын
Terima kasih 😁😁.
nice installation video!I have the same fog lights installed on my motorcycle but opening the ignition one or two bulbs blinking without turning the switch light on!sometimes all of the six little led bulbs glow a little when I turn the ignition on. Turning on the switch light all the the six chip lights perform normally.Is there a possibility to know what is happening?
@tuhinde698
5 жыл бұрын
Might be some issue with the switch, a very small amount of current is passing through the switch while in 'off' position, inspect the switch's continuity with the help of a multimeter, there should be no continuity in 'off' position.
Great video....I am going to install the fog light...bro do I need separate relay for installing mobile charger or can I use one relay for both fog light and mobile charger...
@tuhinde698
5 жыл бұрын
If you put both of them on the same relay then you need to turn on the lights everytime you want to charge your mobile. Or else you can directly hook up the charger with ignition, but it is not recommended if you are drawing more than 1 amp current. If you have space left, you can always add a separate relay for the charging circuit.
@surm4801
5 жыл бұрын
Thanks dude for your reply..I came up with a solution I connected connector pin for both ...so when I don't need my fog light I just need to disconnect the connection which I placed below pillion seat...plug and play kind of switch....
@tuhinde698
5 жыл бұрын
Just make sure to insulate the live connector properly and don't let the connector touch bare metal after disconnecting which will result in short circuit.
@surm4801
5 жыл бұрын
Tuhin De ..sure bro..thanks a lot...check out my this..kzread.info/dash/bejne/ZHx7yMGnetrfYbw.html
where your place, i want to install fog light in my tvs stryker bike
Great
hi Tuhi thanks for this detail video. Need to ask a few things. 1.battery + and battery - are both going to the relay right. Then the switch handlebar mount from ignition is it carrying ignition positive again? Can u explain a bit.
@tuhinde698
5 жыл бұрын
The switch is for turning on/off the relay.
@arunabhasaha117
5 жыл бұрын
@@tuhinde698 did u mean the relay gets two positives one from battery another from ignition
@arunabhasaha117
5 жыл бұрын
@@tuhinde698 its a simple horn relay right?
@tuhinde698
5 жыл бұрын
The fog lights are powered from the battery. A simple switch circuit can be turned on by anyone at anytime. I wanted to run the fog lights from ignition, so that it can only be turned while the key is in ignition position. But in that case the full load of the fog lights will be on the ignition wire, which can damage the wiring harness in long run. Relay takes a nominal amount of current from ignition when the switch is turned on and allows the battery power to flow to the fog lights. The positive wire which is going from the battery positive to relay is for turning on the fog lights when the relay is powered on by the ignition switch.
Im planning to put some voltmeter and a charging mount. Can i use the same line with the fog lights?
@tuhinde698
6 жыл бұрын
yes you can, but then you need to turn on your fog lights whenever you want to use charger or monitor voltage reading.
Fog light me relay use karne se fog light fuse ni hogi?
bhai bohot helpfull video hai, baas ek question hai kya yeh same thing main aapne fz25 abs version mein kar sakta hoon ?
@tuhinde698
4 жыл бұрын
Agar bike warranty pe hain toh bilkul nahi.
@revvinglife2662
4 жыл бұрын
lekin as per yamaha company electrical wiring mein koi waranty nahi hota, aur battery ka waranty uski company mein claim karna padega
@tuhinde698
4 жыл бұрын
Bike mein kuch bhi problem hua toh company warranty dene mein problem karegi, phir bhi lagana hain toh ekbaar showroom se puch lena warranty ke bare mein.
@revvinglife2662
4 жыл бұрын
isse battery k ilava kisi or mein effect hoga kya
@tuhinde698
4 жыл бұрын
wires agar thik se insulate na ho toh short circuit hone ka khatra rehta hain, isiliye fuse diya hua hain wiring mein lekin phir bhi risk toh rehta hi hain.
Hi I liked your video. Very good explanation. I have the below questions, 1) Does any relay will work. Or does it needs to be 12V/30A. If it is 12V/30A, then why? 2) Where can I do this in Bangalore? Please help. Thank you very much
@tuhinde698
5 жыл бұрын
Yes it has to be of 12 volt but amperage depends on the load, in our case total load was around 36 watt and a 10amp relay would also work but our local shops had 30 amp relay only. As long as that's a 4pin normally open relay it will work, if you are confused then just ask shopkeeper for 4 pin horn relay.
@kuldeepkanawaje2300
4 жыл бұрын
@@tuhinde698 Can you please explain exact fuse amperage you have used in your case with 30amp relay and 36 watts LED lights, waiting for your reply
@tuhinde698
4 жыл бұрын
In our installation we have used 7 amp fuse.
@kuldeepkanawaje2300
4 жыл бұрын
@@tuhinde698 thanks 👍
From 12v switch which colour (red or black) wire u given to ignition plug? Else it work on reverse way
@tuhinde698
6 жыл бұрын
+Hari Prasad it does not matter anyone wire will work.
Music is best
Excellent video though I'm visiting late :) I have a serious question. My battery is 12V 6Amp and it powers all factory default electronics. I have bought a fog lamp 40W each, so 80W total. So these fog lamps need 6Amp from battery, correct? Even if I use a relay of 30A/40A, will this existing 6Amp battery manage to power the 80W fog lamps without damaging any electricals on the bike? Bike is new and if I burn anything, warranty expires. That's why I'm scared to touch any wiring. Expecting your reply. Thanks again for this wonderful video!
@tuhinde698
4 жыл бұрын
If your bike is in warranty then we would not recommend installing fog lights because this will void your warranty. Yes the connection is directly from battery but the battery will discharge only if you turn on your foglight without starting your bike. After ignition alternator generates power which then get rectified via regulator rectifier and then charges your battery and also provides power to other accessories. We have installed fog lights(18*2=36watt) on our Yamaha ss125(5amp battery) and hero super (2.5 amp battery) splendor and till date we haven't faced any electrical problems. If an extra 80 watts of load is beyond your motorcycle's charging system's capacity then you would eventually get to know it, you battery would not charge properly, you will face starting issues, horn wouldn't sound loud etc. So please wait until your warranty period is over and then proceed.
@knockoff79
4 жыл бұрын
@@tuhinde698 WOW GREAT BHAI!!! Thanks a lot for all these details! :) I'll wait as per your suggestion. Subscribing mainly because you bothered to reply! :)
Will it work on direct light if we use it in home
I want to install fog on my royal Enfield Himalayan.. plz can you help me... ?
To sir fog light ko betry se kare ya hedlight ke wayar pe lgay plz.ans.
The relay will on all time
@tuhinde698
6 жыл бұрын
Bujhte parlam na, abar problem ta bolben please...
Good
Bro can you tell me.. Which application u useing for writing on video..
@tuhinde698
4 жыл бұрын
Filmora
Sir can i ask how did you put the switch on the relay? Why do you need to put the accesory switch wire to the ignition wire? Thanks
@tuhinde698
5 жыл бұрын
I wanted to turn on fog lights only when my motorcycle is in ignition position to avoid misuse of fog light by anyone. If I connected the switch directly to battery then anyone could turn on the light at any time and that could discharge the battery. Relay connection are clearly shown in the diagram at 05:14 please refer to that diagram. Do not alter the relay pin orientation at the time of connection.
I have honda shine. Shall I use this method for instalation. Or any changes ? Then why we use relay ? Thanks
@tuhinde698
6 жыл бұрын
+Naren Rajendran without relay full load of fog light will be on ignition wire and that can overheat the ignition wire in long run.
@naren9485
6 жыл бұрын
Tuhin De : Thank you for your valuable reply.
@naren9485
6 жыл бұрын
Tuhin De : if any doubt I will msg you. Thanks
bhai fuse kitne amp ka use kiya hai? & market se minda ki 4 pin horn relay mili hai kya vo use kr skte hai lights ke liye
@tuhinde698
6 жыл бұрын
Fuse maine 7amp ka lagaya tha, aur agar relay dikhne me same hua toh use aap laga sakte ho.
sir actually why we need inlay fuse and relay plz xplain me....n plz list da materials from5:00 plz list...ill b vry gratful to u...
@tuhinde698
6 жыл бұрын
+kedi Tetso fuse laga ne se short circuit ka khatra nahi rehta. List of materials toh video ke start me hain(0:18).
@martincooper7173
6 жыл бұрын
Teri main ignition wire burn nahi hogi future me. this wiring is more safe...
@honamiryuko1160
5 жыл бұрын
Fuse is only a safety device for ur lamp just in case it will over load
@yutayano6171
5 жыл бұрын
@@tuhinde698 can you translate to english on what you have beeen said. Thank you
@tuhinde698
5 жыл бұрын
Fuse is for protecting the circuit from short circuits & overload. Relay is for bypassing the load from ignition wire to a separate circuit. When turned on, Relay takes a nominal amount of current from ignition wire as a token signal and turns on the light by talking power directly from battery through separate wire. As the load of the accessory doesn't pass through ignition wire it remains safe from overloading and overheating risks.
bro can we connect a 27w led light to our high beam pass switch...will it take the load
@tuhinde698
5 жыл бұрын
Without relay the switch won't last long , it's better to use a relay.
@akhilprakash1640
5 жыл бұрын
Ok
And next video he's going to show us all, !!!, 🤔... a home made rocket 🚀 to the moon!!!...lol 😂 ( all in fun, good some tips there) ✌ & 💖 🌍 we 🙏
Tengo una hamaha fz 2.0 pero no se donde ponerselos no tiene espacio que me recomiendas? Plis
@tuhinde698
5 жыл бұрын
Si no tiene protector de piernas en su motocicleta, entonces puede instalarlo en su manillar usando soportes, pero primero le recomendaría que verifique las leyes locales si este tipo de modificación es permisible o no.
Bro i need u r help. Maine 3 pairs qarede hai fog lamps ki i mean 6 pieces. Toh 6 piece ka conection kaise krna please guide me bro 1 fog lamp 12w ka hai shayed dnt no exactly please suggest me
@tuhinde698
6 жыл бұрын
Main process toh same hi rahega, lekin battery se positive aur negative wire ke liye 2.5 mm ka wire use kijiye. Fuse 15-20 amp ka lagega. Baki wires sab same hi rahega(1 to 1.5mm). Connection karna thora mushkil hoga, kahi kahi pe aapko 6 to 7 wires eksath join karna padega. Battery ke upar load jyada hone ke wajah se battery mein bhi problem aa sakta hain.
@JSANDYJ
6 жыл бұрын
@@tuhinde698 thnks bro aik pair less kardete hum 4 he piece lagate ye fuse kaha par milega..? 15-20 amp ka..¿
What's the best place to buy these in Kolkata? Do you have a favourite shop you can refer?
@tuhinde698
5 жыл бұрын
No, as of now i don't know any auto parts shop that i can refer to you. I bought the fog lights from amazon, and all other things from local auto shop here in kharagpur.
Hi I had a question, I own RE Himalayan and am trying to install 2 different types of for lamp, one projector and one flood, to install two, should I get two different relay and wire them together or one would do the job?
@tuhinde698
5 жыл бұрын
Are you going to install projector headlight or projector fog lamps??
@pulakeshisalunkhe
5 жыл бұрын
@@tuhinde698 projector fog lamps...1with 18watts another 18watts
@tuhinde698
5 жыл бұрын
You don't have to use 2 different relay for 2 different types of fog lamp as long as the total amp is not exceeding the rated amp of relay.
@pulakeshisalunkhe
5 жыл бұрын
@@tuhinde698 thanks a lot for the suggestion
What if we connect negative directly to metal part of bike? I have seen some videos which suggest to connect negative wire of fog lamps to metal part of bike. Does such setting make any problem?
@tuhinde698
5 жыл бұрын
That will work also. We didn't use that method because of aesthetic purposes.
can you please explain about the note you've shown sir? i don't quite get it. I'm sorry
@tuhinde698
6 жыл бұрын
Are you talking about the note at 08:17 ??
I wonder if water is not going inside the lights when it's raining? At 1:46 you can clearly see there's a big hole.
Does the driver in front feel glare
Whts the ampere range of the inline fuse used?
Bro should i give -ve of light to body or battery direct ?
@tuhinde698
5 жыл бұрын
You can connect negative to body, it will also work.
Bro i hav autofy 6 led aux light so , which relay i should use ( amps) ? .....n fuse rating. ?
@tuhinde698
5 жыл бұрын
If you have 1 set(2) of fog light then 10 amp relay and fuse will be more than enough.
@shashankhedau2956
5 жыл бұрын
Tuhin De thnx brother
Sir jo 3wire wale led hoti hai wo kasa fit krta hai oski 3 wire kis kam ki hai
@tuhinde698
6 жыл бұрын
3 wire led ke barey mein toh pata nahin hain sorry.
what relay did you use... is it ok to use horn relay
@tuhinde698
6 жыл бұрын
Yes , just make sure that the relay has 4 pins.
Sir if v r not riding our bike till 1 week or two weeks. Den any afact to battery . Like bike is not starting or something.
@tuhinde698
5 жыл бұрын
Yes I face the same problem in my yamaha ss125 bike and then I have to use my kick start to start my bike.
@ashishbc3963
5 жыл бұрын
Tuhin De so what is solution for dis sir
@tuhinde698
5 жыл бұрын
The easiest solution is to replace your battery, if your battery is more than 3 yrs old. If problem persists (very rare) then check bike's charging system(take professional help). As i told you earlier, I was facing the same problem, tried several things but none worked. At last I decided to change the battery and since then i rarely faced any problem.
Hi I have problem whit my fog lights the switch turn on and the lights not I have a red wiring on the battery whit fuse and other wiring orange this one I check on the relay is don't have power when I turn on what you thing the bulbs all ok thank you very much
@tuhinde698
5 жыл бұрын
The question is not clear, couldn't understand your problem, keep relay's orientation exactly as shown in the video or else it would not work. Relay will work only if it is provided with 12 volt power in to the correct pins. P.S - Sorry for the late reply, your comment was marked as spam by youtube, so we couldn't find it earlier. You can also write in your own language, we will try to translate it through Google translate.