How to install Lazy Susan Hardware
Тәжірибелік нұсқаулар және стиль
How to install Lazy Susan Hardware for a custom made project.
E-Book Journey Towards Wholeness:
chrissilverman.gumroad.com/l/....
Shop Home Depot:
homedepot.sjv.io/ZWMa1
^Affiliate Link^
music: iksonmusic.com
Пікірлер: 35
The other option is to drill out just the big hole or holes, you can see though the bigger holes that the top holes are lined up with their center marks, that way you're more positive, if you layed it out properly your top is in the correct position and the Susan will spin centered inside the cabinet
Thanks for this! I'm gonna make a giant D&D table map on a lazy Susan.
Excellent 😁 thank you ‼️
Hay thanks so much for this video I tried to work out how to do it myself and could not for the life of me compute it in my brain LOL thanks heaps bro! You rock!
Thank you!
Perfect thanks!
Thank you!! This is exactly what I needed
@ChrisSilverman
3 ай бұрын
Glad it was helpful!
Thanks tor this! But about the large hole, is it not just for this?
So me and my fiancé are currently working on a rountop both base and top . How do we drill the holes to attach it without stopping it from spinning.
what size is the larger board, and what size is the turntable?
Hey Chris, gracias por el vídeo. Aún sin hablar inglés lo entendí. Espero subas más video amigo. Saludos desde El Paso Tx Tu amigo, José Gutiérrez.
@ChrisSilverman
2 жыл бұрын
Hola. Me alegra que te haya gustado y entendido el video. mi papá creció en Texas. paz mi amigo.
There is a way to do this with drilling only one hole all the way through the wood, but it looks like this way may be easier.
Can you tell what type and size screws you used to connect the top to the base?( after the flipping of the board)
@ChrisSilverman
2 жыл бұрын
Yes, If I remember I believe I actually used interior door hinge screws. The screws found in your door hinge. I think that’s a #9 x 3/4”
What size screws did you use to go through the base of the lazy susan hardware to attach to the wood top? I want to make sure the screw head fits through the hole.
@ChrisSilverman
2 жыл бұрын
Yes, If I remember I believe I actually used interior door hinge screws. The screws found in your door hinge. I think that’s a #9 x 3/4”
@lisasolis7399
9 ай бұрын
How does the screws not go all the way throw the other holes in the bottom of the lazy susan attachment thingy?
Do I have to have a base connected? I just want the turntable on the counter, with the display case on top.
@ChrisSilverman
3 ай бұрын
I’m not sure but I think you would still need a base since you would need to drill into or through the base and if the counter is the base you wouldn’t want to drill through that. I’m sorry I might not be too helpful. I can’t quite envision the turntable on the counter or what you are asking exactly.
What size spade bit did you use to drill the holes?
@ChrisSilverman
3 жыл бұрын
sandj2913 I used size 3/8
@sandj-tv3gs
3 жыл бұрын
Chris Silverman thank you!!
Very nice 👍 Where this hardware you buy from ?
@ChrisSilverman
2 жыл бұрын
I got the hardware from Lowes Home Improvement
@charanjitgill2384
2 жыл бұрын
@@ChrisSilverman thanks 🙏
Novice here... So I'll need to sandwich the lazy Susan between to boards?
@ChrisSilverman
2 жыл бұрын
Yes, that’s right.
@mmartinez4117
2 жыл бұрын
@@ChrisSilverman thanks so much. I'm ready to try!
' i did put a thin rotating turntable bearring for the big TV... no wonder why this man use a cap on the head
You only have to drill one hole through your base then just spin it around to screw in the top 😂😂😂😂😂😂😂
@ChrisSilverman
2 жыл бұрын
😆 I put in a little extra work huh
II’ll is