I bought the same fog lights. The wiring harness is identical, but the wires are spliced together going to the on off switch. The only wires that need to be connected are the ones going to the battery. It doesn’t have any wires that need to be spliced and connected to the inner fuse box. I kept going back about 30 times on the video because I didn’t understand my wiring harness. But now I get it. I guess mine is a newer version. But the video is very detailed. Thanks!

Cool tip with the blacking out the chrome. Nice Getting ready to put fog lights on my black Elantra gt. That would be a good look! Thanks

i love what you did with the vinyl wrap.. 😍

@EverythingAvron

2 жыл бұрын

Much appreciated!.. I do enjoy my vinyl wrapping lol!

Wonderful! Great tutorial! Looks very nice. Is there a big difference driving at night?

Any video on hyundai tucson, installing fog light basic model don't have fog light

Where are you buying the parts for yours? I have a 2014 Hyundai accent gs and I’m worried about changing anything because of not buying the right part and if it can even handle what I do. I’m wanting new headlights and taillights.

Is this the same as Daytime running lights?

What size are the screws on fog light, Google was no use I cannot find the correct size in need

Did you have to use the metal clips in the bag or just the screws?

How did you vinyl wrap the lights?

Ordered the same kit but the wires between both fog lights were too short. Not a big deal though.

My wiring set is just slightly different than yours. My red light does not turn on, and there isn’t any positive or negative cable coming from the switch connector side. There is just one yellow wire that says “ACC” so I’m guessing it’s an accessory wire that needs to be hooked up. I fiddled with it a bit and all of the connections are right, it’s just that one yellow wire. I hooked it up to the wipers and the green light would flicker on and off only when the wipers were going. This was in the fuse box under the hood, and when I tried hooking it up to the fuse box under the dash, the stereo wouldn’t turn off when the key was out of the ignition??? So I just pulled out the wire and my stereo is fine again. Pretty weird. I’ll get it eventually.

@EverythingAvron

3 жыл бұрын

So yes sounds like your yellow wire needs to be hooked up to a "switched" power source.. So you could tap it into the Headlight wire so that when the headlights turn on your fog lights turn on. Or you could manually wire in a switch from battery and connect that wire to that and control it yourself.

how did you punch through the firewall?

What kind and size tires on that accent?

Thank You for the very nice informative video. Could you please tell how you passed the wire/s (think the white wire that connects the relay and the white plastic three wire connector for the switch) through the firewall. Did you go through the main firewall grommet (with a lot of wires going through it) or some other hole/grommet in the firewall? Also, what type of tools did you use?

@toxiccolin1797

6 ай бұрын

Hopefully you’ll see this. It is the main grommet with all the wires going through it right near the battery. I just wired a subwoofer into my 2014 recently

Do you need to remove the bumper to do this

Hey I would like to know is there any existing wiring for the lights so I can hook up the original fog light switch

@EverythingAvron

Жыл бұрын

Not sure if there is on the Accents, I know with my F150, the XLT has all the connections available in the main body harness for all the accessories the Platinum had, but I have to buy all the other secondary harnesses and components... Probably a good question for one of the Hyundai Parts techs

Did you adjust fog lights

The base where the screws go for one of my fog lights its broken. Do you think there might be a way to install them?

@EverythingAvron

6 ай бұрын

If you still have the pieces of that base you could use an epoxy to adhere it back together and screw back in. Otherwise you may have to clean the surface and use a good automotive epoxy/adhesive/silicone that could hold the light down in that spot? these are just ideas though

Can you please tell the screw size used to attach the fog lights to the bumper?

@EverythingAvron

2 жыл бұрын

im not sure the size exactly but the same screws that hold the black plastic pieces there will also be able to hold the fog lights themselves

How many ampere did you use to tap the switch on the fuse box or what is the size of it?

Where is the pre existing firewall hole grommet located

@EverythingAvron

10 ай бұрын

From the engine bay it’s in the top right corner behind the battery area. From the inside it’s way up to the top corner under the dash on the driver side.. assessable by laying on your back next to your pedals and reaching up

How long does it take to install the bumper & fog lights

@EverythingAvron

2 жыл бұрын

First time, because you want to be careful with the brackets and wiring.. Id say you could get it done in 2-3 hours. You want to make sure its done right the first time so you don't have to do it again.

Why did you not record the part where you connect the cables to the battery that's like the most import part

@EverythingAvron

2 жыл бұрын

my apologies, However that part is pretty straight forward. there will be the red positive and the Black negative and the other wires will go to either the switch itself or to the Foglights. But next time ill be sure to not truncate that part

@theleonfamily5449

2 жыл бұрын

Thanks. good content though. i love these little cars. Just wish the suspension was a little more stable and it's balls where a bit bigger

Can you please show us how to install LED headlights 🙏🏼 I have the same car lol Hyundai Accent 2013 🙌🏼

@caseyarcher2757

3 жыл бұрын

I have a 2014, and I went to autozone since they had the LED headlight bulb number I needed. They’re very easy to hook up!

@EverythingAvron

3 жыл бұрын

Indeed the LEDs will install exactly like the stock Halogen bulbs. They are just a different light type. They twist out and install exactly as OEM. But next time I make a headlight video ill show the installation.

the fuse of accent is micro or mini?

@teenvisuals2486

2 жыл бұрын

tnks in advance

MANY people have asked the same question, where did you pass the wires? I think the bulk of my 2.5 hours outside was just trying to find a way to pass the wires. And I asked for help, we still couldn't figure it out. Is it possible to do a follow-up video at least indicating where you passed the wires and explain how you did it? It would be very much appreciated. Thank you in advance.

@EverythingAvron

10 ай бұрын

So the white trigger wore is the only one that has to go through the firewall. What I did to make it easy to manage was de-pin that white wire from the connector that goes inside the car… then in the engine bay behind the battery very top back right corner is a large rubber grommet where the engine harness feed through. You have to poke a hole with a razor or a sharp pick then stick the wire through. It is easier said then done, youll have more room to work by laying on your back on the driver side floor board and reaching up to that top corner

@toxiccolin1797

6 ай бұрын

I wired a subwoofer into my 2014 recently, and the majority of the time was finding a grommet lol. Cut a hole in the grommet and tie some string to the wire to pull it through. Just be careful not to cut any of the other wires going through the grommet, theres quite a few.

Can you upgrade my Hyundai accent LOL