I have Hyundai Accent 2018 Gas, hindi ko na makabit ang dust cap after headlight installation compare to Halogen bulb.

Very helpful.

@SelfService. I don't know why my friend told me that if the car didn't come with LED lights he can't change it. He also told me that LED lights can fog up the headlights?

10/10

I own the same car. I replaced the headlights with the Auxito 20,000 LM . low beam is good. high beam is really bad. very weak and the pattern is bad.

Did you have to use a load resistor for your headlights to stop anti flickering

I have h4 on my 2019 Accent but the 3 pins are at the end of a wire thet comes from the bulb instead of bieng part of the actual bulb itself As for the tail light i put led and its burning the tail light now its dented in from the heat

Is your socket type similar with hyundai accent 2014 model?

sir do you have a link on the dome light bulb also the reverse light bulb?

The fan is inside the headlight housing compared to other design where it's behind the heatsink and outside the rubber boot. Any noticeable moisture/condensation buildup especially when it's raining?

@Self.Service

Жыл бұрын

no moisture build-up as the dust cap at the back of the headlight is tightly sealed

@percivaldionisio3378

10 ай бұрын

@@Self.Service sir any warning light showed up after installing the said led lights?

How’s the performance after a few months pal? Also can you send me a pic of how it is during night? Thanks! Planning to buy the same LED headlight.

@johnpaulodionisio1586

10 ай бұрын

@selfservice, how is it during night?

How was it after 10 months? Especially the headlight? Is it ok to still use the factory dust cover? Any overheating?

@Self.Service

Жыл бұрын

Yes, still working up to now. no overheating, no moisture inside the headlight.

@althegreat17

Жыл бұрын

@@Self.Service already bought it. Ganda ng cut off ng LED

May i know the details of all the bulbs you install please

@Self.Service

8 ай бұрын

Check the links on the video description. Thanks

Hi, did you return the dust cap for the headlight after installing the h4 LED? It's the same dust cap shown at 5:58 of the video.

@Self.Service

Жыл бұрын

yes, I put back the same dust cap that I originally removed.

@Self.Service

Жыл бұрын

putting back the dust cap is on 16:00

How's the LED brand as of now? And I think it's much higher wattage than the stock bulb.

@Self.Service

Жыл бұрын

All LED's are still working good. I have not changed any bulbs yet. All LED are still bright

@johnsantos5494

Жыл бұрын

@@Self.Service Nice! If you have time, can you make another video just for the insights to show us the beam pattern or light alignment for Lo/Hi beam at night. Thanks!

@jennmarquez4653

Жыл бұрын

@@Self.Service when you change all LED, you did not change any relay ?

@Self.Service

Жыл бұрын

@@jennmarquez4653 i never change the relay but i modified/hack the relay to eliminate the hyperflash. see this video beloe for the steps kzread.info/dash/bejne/eGWDuLSqYNzgh7g.html

@jennmarquez4653

Жыл бұрын

@@Self.Servicewhat if, only headlight bulb will change?also need to remove this resistor from the flasher module?

How did you manage to remove and replace the bulbs on the driver side? Napaka sikip sa 2019 Accent, hirap hugutin ng bulbs. Do you have any videos?

@theamused8705

3 ай бұрын

You have to remove the fuse box out of the way. It takes a 10mm socket wrench.

Gumagana padin po ba ito till now? Planning to change LED headlight as well and saw this type of headlight where its just like the stock where you can close the CAP

@Self.Service

Жыл бұрын

working pa rin sir. hindi pa ako nakapagpalit since changing.

What year is this accent, pal?

@Self.Service

Жыл бұрын

2016 model

@capybaraponque611

Жыл бұрын

@@Self.Service Thanks, and you didn't have any issues fitting the headlights? I bought the same headlights, but I'm having trouble closing the dust cover, it seems to not fit, it sticks outside a bit.

@Self.Service

Жыл бұрын

@@capybaraponque611 have you inserted the locking pin tightly? For me it still has a small gap between the headlight pin connector and the dust cap.

@capybaraponque611

Жыл бұрын

@@Self.Service It worked, I hadn't put the light in the right position.

So lengthy video for changing of lights, some one might have assembled the whole engine in the same time 😂😂😂

@Self.Service

Жыл бұрын

Thank you for watching it 😜

My hyperflash po ba ung signal light?

@Self.Service

Жыл бұрын

Meron sir and ito yung solution ko. kzread.info/dash/bejne/eGWDuLSqYNzgh7g.html