I love how all of your guys videos feel more true to life. Like if you fumble your words a bit or forget to turn the multi-meter on, you dont just cut it and re do the take so everything is perfect. Makes the videos feel exactly how things would happen in real life as apposed to a production video. contributes to the wholesome father son vibe yall got going on. Makes the video feel way more authentic and watchable. Keep it up

I first saw your videos on the KZread app on my TV. Kind of like a daily dose of handyman/DYI information. You're a natural at teaching and so far beyond (in experience and knowledge) any contractor I've ever met. I appreciate how you approach "advertising" the products you use, enough to get the marketing while not taking away from the purpose at hand. Thank you for your efforts in producing these videos, they are helpful and entertaining. Wish my Dad could have been like you!

Finally! A channel that helps everyday diy-ers. I am so grateful for your channel. I put in the floodlight all by myself because of your video! Feeling empowered 💝

Another fine job done by Paul and Jordan thanks for the tip I ran into a couple jobs with the same trouble you had there and didn't really know what to do with it but somebody showed me away and you showed me a different way thank you so much keep recording so I can keep watching, you guys be safe

A true electrician will leave all those little piles of cuttings on the ground for someone else to clean up.

@ranger178

2 жыл бұрын

lol yeah, every job is littered with wire ties and scrap insulation striped from wires

@stevewilson3791

4 ай бұрын

So true.

@daconqueror101

Ай бұрын

Hahaha bro fr

@jamesy11111

10 күн бұрын

Where’s the lie tho

As an electrician, when I hear 'outside light' MY stress level goes up! That's exactly how I ended my week this week, too. Great job guys! Also glad to see you have some S.A. friends! lol

The old man shows you exactly what he is doing. Great information that is needed. It gave me exactly what I needed to know. Thanks

I wanted to let you guys know that I watch a lot of your guys's videos and I mean a lot I've seen just about every one of them and your guys' tips tricks and doing things the right way have helped me out as a contractor more than once keep the great content coming

Your videos are well presented and super detailed. Great work fellas..learning something new in every episode. Thank you

Thank you my friend. I have recently found you here and I'm lucky to do so. Have I said THANK YOU?!? You have taught me a great deal of things. Knowledge is power!

Enjoying the contact guys. Great to see positive crews out performing work.

Thanks Stud pack, one more thing add to my arsenal of thinking. Now understand grounding wire fualts. Your doing a great job. 👍 Remodeling my kitchen.

Nice Job Paul, great Tips on how to break it Down, and proper way to install ground wire, love the fancy tools, makes the job much easier.

I love this content you are sharing ! Please keep the videos rolling out !

At 14:21, you actually want any stranded wire to be leading the solid conductor by around 1/16” to 1/8”. By the looks of it, those stranded wires will pull out if you give it a pull test

@jefffree6990

2 жыл бұрын

Great tip!

@aurvaroy6670

2 жыл бұрын

I hate to sound like an idiot but what's the point of a pull test if those wires will almost never be under that much tension inside the junction box?

@ixionn563

2 жыл бұрын

@@aurvaroy6670 Because if a wire can easily pull loose, then it is likely to work it's way loose over time from vibration and heat/cold cycles. Eventually, when a wire does get loose you'll have a bad connection, which can cause arcing, heat, or both when under load, so it would become a fire risk. Connections that survive the pull test are far less likely to work loose over time.

@jeffhansman2829

Жыл бұрын

@@aurvaroy6670 Better safe than sorry.

Love, Love, Love Stud Pack!!!! Hope you guys can keep it going. If you make them, they will watch. Great content, learned a few things besides.

Studpack & Cars what a great combo guys!! Love the video!! Keep up the good work!!

Great video! It's good to mention that on three phase wiring, the hot wires could be black for one phase, red for another and blue for the third. Any phase would work for the single phase light, but it explains you connecting the red wire in the box to the black wire in the lighting fixture.

Great work as always, I would have used the cordless for the 3" screws... LOL...?? You guys are true men...

@olafvanes

2 жыл бұрын

Yes, I use a compact 10,8 volt Makita cordless drill for almost every screw

Great video!. Gave me all the information I needed to install my flood lights. Thank You!

That was very helpful for me to do the old lighting out back, I’ll have to get me one of those Kleen screw drivers 👍🏽 I sure enjoy watching your videos, always helpful.

Watched and learned so much! Thanks for sharing your videos !

Fast forwarded to the part I was curious about, then ended up watching the whole thing because you made it entertaining! :)

Appreciate your time in clearly explaining the details. Love your content thank you!

Really love the tips on not losing screws and/or how to deal with electrical curveballs but not take safety shortcuts:).

Upgrades, tools, cars, beer and pizza.... thats a boys day right there. Great video!

Would have liked to see more of the cars! You guys are great. Keep it up. Probably my favorite channel

he's so knowledgeable, skilled, and hard working men are always a pleasure to see

Check out the Klein C2 bit for most electrical fittings. Basically a square/flat combo really gets a nice firm grip in those ground screws, receptacle terminal screws, EMT fittings, and more.

@Chris.Rhodes

2 жыл бұрын

I actually prefer the Milwaukee ECX

Man you guys we’re vary helpful I been watching your most recent build defiantly a Fan . Keep up the good work

Thank you for this very informative video. So much good info!

Thank you so much for sharing your videos and knowledge 🙏🙏🙏

Nice job ! I personally always use a 5/16 " for ground screws , easier on my arthritic hands.

You guys are awesome, your positivity make me feel good about the world again lol....

STUD PACK VIDEO on a Saturday made my day !!!!!!!

Excellent work per normal, thank you Jordan and Paul. Awesome man cave Best Bud! 10:50 I believe that's your best option really (matter of opinion) realistically you should have the compression/raintight fittings there and not the normal set-screw type on the upper box. This is simply because you're outside, you wouldn't want moisture getting in the boxes in anyway possible. I personally run dedicated EGCs for every run but every situation is different, and with your case they weren't previously installed.

“14g for 15A and 12g for 20A” is a great way of remembering that rule. Always learning something from you guys.

@luvdady

2 жыл бұрын

Generally just use 12 on 15 amp the overall $$ difference is negligible in the long term. Especially if you don't have any access to the wire

@electroman982

2 жыл бұрын

You can learn a lot more accurately from the National Electrical Code Book aka NEC !!

@jefffree6990

2 жыл бұрын

Great tip! though i can't imagine that short leg for an LED light calls for 12ga/ 20 amp . Is that a local code? (obviously can't hurt to have it though, and as long as you have some hanging around...)

@luvdady

2 жыл бұрын

@@jefffree6990 ok let's say 14 awg is $49 a roll. And 12 awg is $59 a roll. For $10 more if you ever needed to bump up to a 20 amp breaker what does it cost you in the long run? $49+ 59+drywall mud and then mudding an tapeing sanding etc... lol Plus if your wiring plugs your probably going to have 12 anyways And leds are low powered, but say 6 months from now you want a ceiling fan?

@bobbing4snapples

8 ай бұрын

​@@electroman982one of the very first things in NFPA 70 is a passage explaining that the NEC is not an instruction manual or a how-to book. While you will certainly use the NEC while you are learning it's not written for beginners and you're likely to misinterpret something and hazard yourself or others

In case you didn't know, it is possible to have a hot neutral where there is a shared neutral (multi-wire branch circuit) and you have an open neutral. This happens when a 12/3 or 14/3 circuit is used to save a wire (not uncommon in commercial installs to save conduit space and wire) and a double pole breaker wasn't used or where two breakers don't have the required handle ties or are on the same phase. You need to make sure both breakers are off on these before working on them.

@markwong6548

2 жыл бұрын

Learned this the hard way

@masseyferguson9195

2 жыл бұрын

I do this all the time when conduit size is too small

@norielvaldes2166

2 жыл бұрын

me, an arduino kiddie: lol, i kno some of these words.

@cdurkinz

2 жыл бұрын

He knows all about the hot neutral, has explained it in other videos. He got the worst or second worst shock of his life on one. He checks them every time, I assume even if he doesn't cover it.

@stevenle1760

Жыл бұрын

Hot neutrals are the worst. The two breakers that supply the hots for the shared neutral should be linked so they both turn off at the same time but it's not common to see this.

Pizza, beer, some electrical work and badass cars!! Now this is my kind of video!!

Awesome video boys. Love it

Love it! great video.

Beautiful job you explained it very well

Love the work!! Keep it up!!!

Reminds me of an on location episode of a home improvement show. Great video guys

@chrisnorden8043

2 жыл бұрын

"I didn't blow up his house"

If I not mistaking, one of the hex sides of your screwdriver will fit that ground screw and would be easier to drive that screw in. It's a great screw driver.

@poeticsilence047

2 жыл бұрын

You are not mistaken. It's ba neat trick i use all the time.

@zTribalstylerz

2 жыл бұрын

Yeah he finally used it to take down the old ballast but I woulda been using the hex the whole time!

@travisk5589

2 жыл бұрын

Yeah, one size is 1/4 inch and the other is 5/16. 2 very common sizes in the trades. That 5/16 will handle hose clamps also

@ranger178

2 жыл бұрын

the Klein 15 in 1 multi tip ratcheting screwdriver has a special combo tip c1 c2 that just fits the square slotted Philips screws that get used in electrical a lot

@joshcowart2446

2 жыл бұрын

@@travisk5589 if it’s a Klein 11 in 1 it also has 3/8 on the other side as well

13:31 always leave the wire nuts/wago/push-on's with the open ends facing down/sealed ends upwards. that is in case of moisture from air leakage causing condensation or rain ingress. if they're hanging downward or sideways they can fill with rain/condensation and corrode apart in months to years.(I learned that the hard way)

@oftenwrongphong

2 жыл бұрын

man, I've never even considered these variables. Thanks.

Love it the best DIY channel on the internet

great job. I always tape up the wire nuts on the positive side just to be safe. In my 90 year old house they soldered the wires together and then used tape.

Wow what a great place! I love Oldschool American cars. They have a lot of character, but that new Camaro is looking spicy!

Really appreciate your videos! Could honestly watch you guys install a toilet! And probably already have... Every time I watch a video though I find more tools I need to buy!

Worth every minute.

I love this video! Thanks boss!

I learn things every time I watch your videos.

Awesome job picked up a few tips.

I prefer Wago 221s when I'm wiring stranded wire. Good job, love the cars!

I usually keep some crimp-on eyelets in my toolbox, and use that to attach twisted ground wires to the box. Here’s an idea for a future video - converting a fluorescent light fixture to LED bulbs by removing the ballast. I did this to my 8 foot garage lights, and what a difference!

👍Your videos are of excellent quality

That's the right way to tackle that job... I Wish I could have been there for the pizza and beer part of the light install project... you know... to help out! 😁

GET OUTTA MY HEAD! I just had a conversation with my wife yesterday about installing some flood lights in our backyard! Y'all are flipping amazing!

I’m not into cars like that but that ZL1 sure is sexy as well as the rest of the collection. I love that you mention the tools you use. Thank you

Cordless Driver time saver and therefore money maker . 21st century guys , get with it . Love your channel guys

Great stuff Paul.

I'm not sure if it's a code violation, but I personally would have replaced that single gang box with a round one. With that it would not only look nicer, but it should have better protection against the elements and help your light fixture last longer.

YOU GUYS ARE AWESOME!! THANKS FOR THE INFO. SOUTHWEST UTAH. 😇

If I lived where you guys are, I would always hire you guys even if you charge me more than the regular rate... I'd be glad to pay for it since I know I won't have to worry about the work. I am super picky as well and Paul is my kind of "picky" guy 😎

@cineaste1969

2 жыл бұрын

Me too. These guys are first rate. The father son thing is pretty cool too. 👍🏼

@TheDarthJesus

2 жыл бұрын

They broke code numerous times, for example pulling Romex through conduit in a wet location, using 14awg in a commercial setting, etc. Hard to not worry about these handyman hacks

@TheDarthJesus

2 жыл бұрын

@SumOfIt You must use a wire rated for wet locations. NMD is not.

@illestofdemall13

2 жыл бұрын

@@TheDarthJesus Where did they use 14AWG? He removed 14 and replaced with 12.

@mrcryptozoic817

2 жыл бұрын

@@illestofdemall13 Exactly. If TDJ is going to criticize, he should make SURE the comment is correct.

Great job 👍

That was a bad ass video!!

Enjoyed this one also.

Hey Stud Pack! That "square drive' is called a Robertson! Here in Canada its the most common for construction screws. Electrical is basically Robbie #1, #2, or if you use the screws included in a light fixture, then Philips #2. Robertson #2 is most common across all building trades here. Keep up the great videos!

@TheDarthJesus

2 жыл бұрын

Square and Robertson are actually slightly different, Robertson screws/bits feature a longer tapered edge designed to hold the screw better. Square was designed because Ford refused to pay for the Canadian designed Robertson bit, and created their knockoff "Square"

Great job!

Love your stuff guys 🇬🇧 🇺🇸

Hey stud pack another great video. wow wouldn't you love to drive that car I would.

Great video! I bought similar flood lights to use on corners of my house. My boyfriend told me what to get. Your video is EXCELLENT for watching to install. Who says girls can’t hang floodlights! 😂 Thank you! 🙏🏻😇

@julienabors2223

Жыл бұрын

I couldn’t fit all the wires behind the new floodlight.

Thanks very professional.

just bought them at Costco 😎 … easy install and we have a ground wire 😎 … sharing your video 👍🏽 … no bonding lugs 🤔 … sweet tool that tapper 👀

Thank you so much brother

Omg what a gorgeous automobile! I don’t like slotted screws anymore idk how our old timer counterparts screws slotted screws to duct work, kudos to them!

Bell boxes are made for threaded IMC or Rigid conduit. EMT conduit connectors are straight thread and are listed for use with boxes and locknuts. Good job showing how the effective ground fault is compromised using the incorrect fittings. Also when wire nutting solid to stranded, put the stranded wire a little past the solid so the nut make a good connection.

@electroman982

2 жыл бұрын

"Bell boxes are made for threaded IMC or Rigid conduit. EMT conduit connectors are straight thread and are listed for use with boxes and lock nuts" Those 2 statements are not accurately true...so go figure...and report back w/corrected relevant info! Sorry I don't do others homework for them for FREE! Clue...start with the Listing/s! "Good job showing how the effective ground fault is compromised using the incorrect fittings" A dagger to the code book...OUCH! Clue...you wouldn't reward your dog for pissing on your leg would you?!!?!? "Also when wire nutting solid to stranded, put the stranded wire a little past the solid so the nut make a good connection." So you have more then one week experience...good boy! Clue...there are places where the 2 types should/should not meet!

@ixionn563

2 жыл бұрын

@@electroman982 Notice how nobody takes you seriously or even acknowledged your comment because of how rude you are for literally no reason? Maybe you can go learn from that.

Nice lights and nice cars!

I never saw a magnet wrist band on anybody else . Great idea . Would get a shock if got hit by power was on? Great job !! I just got done wiring same flood light.

Lol "sometimes." really enjoy your videos.

that magnetic wrist band is cool as heck!!!!!!!!!!!!!!!!

As always, y'all hit a homerun!!

This is my dude. I love him

So I've decided to watch this in my lunch break 🤣 You have GOT to go back there and give your KZread gang a tour of his cars 😁😁😁😁😁

when you splice stranded to solid make sure the stranded wire is ahead of the solid wire so the wire nut can pinch the wires together better makes a stronger connection

Great video, helped a lot. Discovered that your link to the Kline ratcheting screwdriver is bad or broken, received an error when I went to the link. Thank you, for sharing the information.

I *hate* these videos. Because it puts me in the doghouse with the boss.. I mean how am I *NOT* supposed to get the klein ratcheting screwdriver? And the tapping tool? Will I need it? THAT'S BESIDE the point. I *may* need it, so I want it. Of course, the upside, is that ratcheting one looks a lot like my 11-in-1 Klein so she may never know! LOL 😂 thank you Studpack for another educational and fun video.

I was taught years ago, to bond the ground to the box and the light holder cross brace as well as the light fixtures ground terminal or screw. why? many times the light fixtures were metal, with unknown quality ground wire connections, the box may be plastic and set back into the wall, and a conductor could become bare and touching the cross bar without shorting and tripping breaker. that would make the bar live, as well as fixture mounting screws/nuts and possibly more, depending on design. if you overthink it and worry too much, you'd never use anything electric nor touch it. 😬 **you should always leave the stranded wire "leading" the solid wire slightly when using wire nuts(1/16 to 1/8 inch),that makes sure it gets grabbed and bitten into and NOT pushed down and out, if not it can often be pulled out with nearly no force.

OK, we all want that 6in1 tap driver!

Nice!

Not a fan of using conduit as a ground. Fittings often get loose and all it takes is one disconnected or loose fitting to ruin your entire ground path. I prefer running a dedicated ground always.

@lyradm1

2 жыл бұрын

Totally agree. Been burned by conduit open grounds

@HBSuccess

2 жыл бұрын

It’s better no doubt to run a dedicated ground, but on a big commercial job the cost of the extra conductor can be the difference between winning and losing a tight competitive bid. So if it’s not specified by the owner and it’s not code nobody is going to do it.

Great video, Paul and Jordan!! Enjoy the pizza 🍕

Here's a nugget I just learned this month: Milwaukee makes the perfect bit (1/4-inch hex or full screwdriver) for those electrical screws. Receptacle box screws take an ECX #1 and, I think, breaker box screws take an ECX #2.. They combine the Robertson #1 with a broad, flat blade for incredible grip.

@ranger178

2 жыл бұрын

yeah my klein 14 in one has the combo bits for electrical screws it is nice has 6 double ended bits in handle that are quick and easy to change

Looking forward to the stranded wire video!

Thank you first for the tip on the 6 in 1 tap by Ideal Industries! That has to be as handy as the magnetic wristband! I would have been pulling out my Tap And Die set, and sometimes something as convenient as the Ideal Industries Tap is so much more cost effective (not to mention time saving effective because we all know time = $$$$!!). I subscribe to the theory work smarter, not harder. Great tip reminding everyone the wire caps should point up. (Unfortunately for me, everything I've learned has been through the school of hard knocks, and while this is a common sense tip once it's been pointed out? I never had anyone to tell me. Just goes to show in my mid-70's, I'm not too old to learn new tricks or anything new, contrary to what I'm told constantly...Yes that is an attempt at levity!) Huge fan of repurposing the "contractor" light inside!! Great Video. Please keep them coming.

That panther pink Cuda 😍

now we need a video on the cars 😁

Excellent tutorial, learned a lot, so thank you! Wondering if issue fitting circular light fitting to the oblong wall box as it relates to watertight seal, or it didn't matter because it was beneath an over hanging part of the building? Seeing how professional you are, I don't imagine you left any gaps, but the video did not show the final fitting at the wall box.

"14g,15A,12g,20A” ....hike, I thought it was a quarterback calling to get the ball snapped, LOL. I'm learning so thank you for the video. I've had a RING motion light with camera sitting in it's box for over a year. Now I got a good refresher on how not to electrocute myself.