Excellent instructional video. Anyone with even mediocre mechanical skill should be able to follow with no problems.

@magicman_metal_fab

5 ай бұрын

Thanks brother. Glad you enjoyed it. 🫶🏻🫡

Pretty cool idea for a golf cart. I can't wait to see the set up of the drive train.

@magicman_metal_fab

Жыл бұрын

Yea man, I have a few tricks up my sleeve. 😂🤣

EXCELLENT INSTALL JOB VERY DETAILED! I'll be installing one on mine thus summer, if I have any questions I'll reach out to you

@magicman_metal_fab

Жыл бұрын

Thanks brother. I greatly appreciate it. 😊🤙🏻

Boss showed up with one of these for a pressure washer unit we rent out. Boss " Do you know how this goes on there?? " Me " No but im sure youtube does!" Hot the fly wheel back on and about to finish up!! Thank you for the video!!

@magicman_metal_fab

5 ай бұрын

Glad it helped bud. 🤙🏻🫡

Excellent video sir. I expect to install this conversion kit on my GX390 on my Simpson Pressure Washer. I'm 68 years old with shoulder problems, too old to be pulling manual recoil starters!

@magicman_metal_fab

Жыл бұрын

Don’t blame you bud. It’s super easy to do too. 😊🤙🏻 glad it will help you.

@joebravo7220

Жыл бұрын

@@magicman_metal_fab I just bought a go kart with a Honda gx340 250 bucks these little engine is strong

@magicman_metal_fab

Жыл бұрын

@@joebravo7220 nice. Just be aware if you try to do the starter swap the pick up on the flywheel is in a different location bud. 😊🤙🏻

I also had a flywheel with the keyway in the wrong position. I took it to my local machine shop and they cut a new keyway in the correct location and only charged me $40. Highly recommend this fix, the engine runs perfectly and I can feel confident that there won’t be any issues in the future . I depend on this engine every day, because I do commercial pressure washing, and it runs about 4 to 6 hours a day 5 days a week and I don’t have a backup engine.

@magicman_metal_fab

4 ай бұрын

Awesome. Great to know bud.

Ive been thinking about doing the same conversion to my 9hp honda.Thanks for the vid.

@magicman_metal_fab

6 ай бұрын

Definitely worth it

Just got it and fixing to install it. Same one you got also Merry Christmas and Thank You’ll for information

@magicman_metal_fab

Жыл бұрын

Absolutely brother. Merry Christmas. Lmk how the install went and if you have any questions. 😊🤙🏻

@philliphall5198

Жыл бұрын

@@magicman_metal_fabworks great and easy to do

Nice job. That was very nicely done.

Was looking for a diy for same exact engine, thanks a bunch

@magicman_metal_fab

4 ай бұрын

My pleasure bud

Thanks for the great how-to video, I'm thinking about doing the same on my pressure washer.

@magicman_metal_fab

4 ай бұрын

My pleasure bud.

Good instruction man! Sincerely from Russia!

@magicman_metal_fab

Жыл бұрын

Thank you my friend. Glad to help. 😊🤙🏻

To whoever has a new flywheel keyway that is not aligned with the original, you can remove the teeth ring and insert it into the original flywheel.

@magicman_metal_fab

Жыл бұрын

Thanks for sharing that brother 😊🤙🏻

@relaxingchannel4839

Жыл бұрын

@@magicman_metal_fab thanks your video I can do it. it took me several days but it is worth

@andrewm4951

Жыл бұрын

My teeth ring was about 100 thou smaller then the flywheel where it sits on the old one. My keyways arnt lines up and its driving me nuts i cant find anything online about it.

@scottyv106

Жыл бұрын

I also bought this kit, and my gear ring on the new flywheel is smaller than my oem flywheel. Im hoping to drop off both flywheels tomorrow to get a machine shop to put a new slot in for me.

@magicman_metal_fab

Жыл бұрын

@@scottyv106 that’s so crazy!! Why the seller of the kit doesn’t have a fix for this. You shouldn’t have to do that bud. I’m glad you got it sorted out. Keep me posted. 😊

Thank you, brother. You certainly are very knowledgeable.

@magicman_metal_fab

8 ай бұрын

🫡🤙🏻🫶🏻

This video helped me tremendously. I thank you sir.

@magicman_metal_fab

8 ай бұрын

I’m glad it did bud. 🫡🤙🏻

Good video. I have the same kit. No instructions. No invoice. No company name of who or where it came from. Weird. My kit wiring version has the black split . One leg goes to ignition coil for spark. The other runs the new electric switch. I just clipped old switch wire and left it run through original diode for low oil. Also weird was the white wire coded to brown for charging coil. I havent started it yet. Going to buy a new spark plug and wire for charger. I was going to say. A 2 5/8 " hole saw worked . Wouldnt have known that had I not watched your video. Good you mentioned gear line up. And cure in comments. Mine has no wiggle room in bolt holes. Hope it meshes or its drill city.

@magicman_metal_fab

2 ай бұрын

Awesome brother. Glad it helped you. 🫶🏻🫡

Thanks for the video, it helped out a lot. But in my experience. My starter was binding/ seizing up after half turn or so, it was struggling. I struggled for two days trying to find out why my starter was seizing up, and it turned out the jumper cables I was using to test it out wasn’t giving the starter enough juice to crank it all the way. Wired it straight to the battery and problem solved. Hope this helps 🦾

@magicman_metal_fab

Ай бұрын

Awesome bud. Glad to hear that.

Thanks this saved me days of confusion 😁

@magicman_metal_fab

24 күн бұрын

My pleasure bud.

Thanks my dude👍👏. I just came up on the same engine. This Honda is big 😆💪

@magicman_metal_fab

Жыл бұрын

It’s a fantastic engine. Can’t kill them hondas.

@fresnobassn744

Жыл бұрын

@@magicman_metal_fab question. Can I put this engine on a mini bike or go-kart?

@magicman_metal_fab

Жыл бұрын

@@fresnobassn744 absolutely brother.

@fresnobassn744

Жыл бұрын

@Magicman metal fab Thanks man🙏

Excellent video. Just going to install my kit now

@magicman_metal_fab

6 ай бұрын

Sweet. Thank you 🫡🤙🏻

@quevicular

6 ай бұрын

@@magicman_metal_fab yep the starter all worked out really well

Hey mate, great vid yeah. So hey, would you know if this kit is suitable for the 420cc Honda clone, otherwise advertised to be 15HP? I don't think it's actually a true 15 ponies, but it does appear to be an exact replica of this gx390 yeah.

@magicman_metal_fab

Жыл бұрын

Absolutely. There a guy on KZread that built a 60 mph Honda I think it was with a 420 cc engine.

Great video. Thank you Going to install on my cement mixer ✅🙏

@magicman_metal_fab

Жыл бұрын

Awesome. If you have any questions don’t hesitate to ask. 😊🤙🏻

Thank you very much for sharing this. 1. So, what was the reason that the teeth did not align; and, 2. What did you do to align the teeth? Thank you very much!

@magicman_metal_fab

3 ай бұрын

Just not sitting properly. Losing bolts to move starter around. It’s not hard bud

Thank You I’m ordering it now

@magicman_metal_fab

Жыл бұрын

Yes sir. Wasn’t that hard to do either bud.

Can you explain in more detail how you aligned the flywheel teeth with the starter teeth? I just had to replace the starter on my Westinghouse generator and it seems the flywheel is getting caught up when trying to press the electric start button. The flywheel began to turn when the button was pressed and then seemed to "seize" up.

@magicman_metal_fab

4 ай бұрын

Just loosen the starter up and rotate it slightly. There’s a little bit of play in the bolt holes. On mine it wouldn’t spin the engine so I had to rotate it.

Fyi if you take a piece of notebook paper and fold it in half, it makes for a good shim to set the gap of the ignition coil to the flywheel. Just loosen the screws with the paper between the coil and the magnet of the flywheel, and let the magnet pull the coil to the flywheel. Tighten the screws and rotate the paper out.

@magicman_metal_fab

9 ай бұрын

💯🫡🤙🏻

Do you have a schematic for that starter ? I had a wire come off that is one from the breaker / overload (brown and red) I am being lazy but do you know where the two wires go on the switch? I thought I found a broken solder joint but wont start where I landed it. Thanks for any help

@magicman_metal_fab

9 ай бұрын

It’s all color coded bud. No unfortunately I don’t. 😞🫡🤙🏻

Very well explained thanks

@magicman_metal_fab

Жыл бұрын

Glad it was helpful!

How did you align the starter. Did you have to log out the large hole and move it slightly. Did you have to move the starter toward the flywheel or away from the flywheel?

@magicman_metal_fab

6 ай бұрын

Yes. Trial and error. The bolt holes should put it close.

How are you brother. Can you make a video on converting an oil cooler on GX390 aircooled engine. Im planning it to install on my generator set. To lessen the heat because you know gensets are at high rpm.

@magicman_metal_fab

Жыл бұрын

I sure can brother. It may take a little bit because I will be leaving town for work in a few days. Definitely a great idea. 😊🤙🏻

Awesome Video. The eBay link says the Electronic Starter Kit is for GX390 year 2011 or older.... does this "older" mean pre-2011 or post-2011? I'm assuming it means 2010 and before?

@magicman_metal_fab

4 ай бұрын

Yes. Correct

Excellent video what if when your key way is at 12 your magnet is at 2 on the old one and on the new flywheel its at 1 with the keyway at 12?? is that enough for it not to run?

@magicman_metal_fab

2 ай бұрын

Probably not bud. It’s super important that it’s the same

So if the only problem you had was alignment of the starter, the solution would be to properly locate that first small hole you drill prior to using the hole saw. That will get the starter motor on the proper centre. How would you propose doing that, in hindsight? I ask in all seriousness, because I have this to do actually myself, once the starter kit arrives.

@magicman_metal_fab

Жыл бұрын

That wasn’t really an issue. If I had opened up the hole a tad larger which I ended up doing would have been fine. The holes that come from the factory were slightly larger which allowed the starter to rotate. It really wasn’t hard to install and adjust the starter. I would absolutely purchase it again if I needed to. 😊🤙🏻

Hey again what did you do with the Black and Red wire that was on the old off on switch? Do you just leave them hang? I know the Yellow goes to the split black wire and the oil switch but i dont see you doing anything with the Black and Red wire off the old on off switch that was on the case.

@magicman_metal_fab

2 ай бұрын

I believe it goes into the key switch. I would have to watch the video again.

Excellent buddy!

@magicman_metal_fab

3 күн бұрын

🫶🏻🫡

Thanks for this information. It may be here and I missed it. What size battery do got use?

@magicman_metal_fab

Жыл бұрын

Typically like a motorcycle battery is fine. Home Depot sells then. I think like $75

@timjoiner8506

Жыл бұрын

@@magicman_metal_fab thanks

Thank you sir for a wonderful video.

@magicman_metal_fab

Жыл бұрын

Anytime my friend 😊🤙🏻

Great video brother

@magicman_metal_fab

Жыл бұрын

Thank you sir 😊🤙🏻

Very informative. Thanks.

@magicman_metal_fab

Жыл бұрын

My pleasure bud. Glad to help. 😊🤙🏻

If I just wanted to add charging to my gx390 to run some 12v hydraulic solenoids, would I just need to buy a coil and rectifier ?, unsure if the flywheel is any different other than the starter gear

@magicman_metal_fab

Жыл бұрын

That I’m not sure of bud. The coil that came in my kit was just a charging coil. I guess used for the battery to start it. I’m sure it should be fine with just a 12 volt charging coil. Or custom make a bracket for a one wire alternator.

Great looking starter. Is it still working well? Also how does the circuit protector work?

@magicman_metal_fab

6 күн бұрын

Starter works great! Haven’t had any issues with the circuit protector.

@JillyN

5 күн бұрын

I watched a video about the starter and they pointed out that the circuit breaker is false and doesn’t connect to anything

@magicman_metal_fab

5 күн бұрын

@JillyN oh. lol I was confused. That a low oil switch. Those cause issues

So how did you align? Adjust teeth on plate? Or starter positioning? Been wanting to add a turn key soon..... thanks for vid 🤙

@magicman_metal_fab

Жыл бұрын

Just loosen the starter bolts and slightly rotate the starter. After a few tries I was able to get it to work. Pretty easy bud. 😊

Do you have another link to the kit? Looks like the one in the description is expired. Thanks for the video!

@magicman_metal_fab

6 ай бұрын

I replaced the link with a different link. Same price I paid for mine. Hope this helps. 🫡🤙🏻

Do you have the wiring ? I have a gx340 and a gx200 I’m doing electric start on both can’t seem to figure it the brown wire and the two black wires !

@magicman_metal_fab

5 ай бұрын

Negative bud. Probably just google it.

If my keyway doesn’t line up . Can I just adjust my valves to Time it right or is there more to the timing ?

@magicman_metal_fab

9 ай бұрын

No because these motors aren’t built like car motors. There no adjustments.

I have this same exact motor the Honda gx390 with pull start and an electric starter as shown in video. In the last 2 years I've burnt through 4 starters and the last one only lasted about 3 months. It will not pull start either, any tips or advice. Motor is mounted on an air compressor on a truck for doing tire repairs.

@tahirm7833

4 ай бұрын

To add, I've taken it to a couple different places and they can't figure out why, one day it'll start up fine and run and the next day nothing starter won't click or anything. The pull start cord has an extreme amount of tension and in the last 2 years I haven't been able to pull start it even once.

@magicman_metal_fab

4 ай бұрын

Email me a video. That’s strange.

Hi Magicman, Its is also possible to GX390 Mega 16HP to install starter like that you do? Thanks....

@magicman_metal_fab

Жыл бұрын

Yes it should be the same friend.

What is difference in the GX 390 that have a black shroud? Any difference in performance or internals?

@magicman_metal_fab

8 ай бұрын

No, I don’t think so. Should be the same.

There's no threads in the holes for the coil. Will they thread in automatically cause of the soft aluminum?

@magicman_metal_fab

Жыл бұрын

Hmmmmmmm. If yours doesn’t have threads I would consider tapping the holes. I wouldn’t chance to “make shift threads”.

@Ropeman302

10 ай бұрын

M6 1.0 tap

Nothing about battery or how you make that starter spin ? Appreciate any suggestions..thank you !!

@magicman_metal_fab

4 ай бұрын

You’re going to need to add a battery. The kit comes with a charging coil to recharge the battery. That coil gets installed behind the flywheel

Is there any differece between Honda and Predator and other copies? I ordered a Simpson 4.4K PSI pressure washer for 1k mullas and it emptied my wallet. The box doesn't say Honda GX390 but it's made by Simpson. Probably a re-branded copy engine. I am worried.

@magicman_metal_fab

4 ай бұрын

Absolutely. Predator is a solid engine. Honda is a fantastic engine. Everyone has copied a Honda engine, but at the end of the day I would only choose a Honda engine.

So I bought the kit for my gx390 of Amazon but problem is that the key on torque converter is off so now it doesn’t run correctly I put pull start back on and it’s fine what should I do?

@magicman_metal_fab

6 ай бұрын

You’re going to need to get the correct one bud. Unfortunately there isn’t any way to fix it without the correct flywheel

Great video

@magicman_metal_fab

Ай бұрын

Thank you

What color are the wires ...go where

I have a Ryobi 6,500 watt generator that I'd like to add a starter to. Any suggestions on where to find instructions or ideas on how to do this?

@magicman_metal_fab

4 ай бұрын

First, I would do a search on eBay and see if they even sell a kit for your engine. If they don’t then you’re gonna have to swap your engine, which is pretty easy.

Hello ...question please ...I have the original honda gx390 with starter ...I like to install the low oil sensor ....my low oil sensor has two cables ...one yellow and one black ....you can send me the installation diagram conection to conect the cables from the starter key box cables ...please

@magicman_metal_fab

6 ай бұрын

It should all be color coded. I’m not the manufacturer of this kit. Just a random guy on KZread that made this video. I’m sure if you googled it bud it will come up. 😊

Great video, just ordered a kit, went to remove old flywheel and realized the new flywheel keyway was more to the left. I noticed a comment here that said to remove the teeth and install on old flywheel but that wont fit either. Also no magnets inside the old flywheel to charge. Any insight would be great. I cant find the reason. The new flywheel looks like your keyway. Also i believe my 390 is a 2017 if that helps. Loosing my marbles over it lol

@magicman_metal_fab

Жыл бұрын

Email me pictures Magicmanmetalfab@gmail.com

@andrewm4951

Жыл бұрын

@@magicman_metal_fab thanks for the reply. I figured it out, so previous to 2011 the flywheel keyway was in a different location so timing would be different for my 2017 engine. I contacted the company and they mislabelled the add of coarse my luck. They are sending me the other flywheel, i also noticed some companies are putting both key way slots into the flywheel and you use which one you need. When mine comes in tomorrow i will send you the pictures of it! Thanks for the reply! Great video!

@magicman_metal_fab

Жыл бұрын

@@andrewm4951 that sounds just like my luck. Lol. I’m glad you got it sorted out bud. Keep me posted on how it goes. 😊

@MartinHernandez-qq2fw

Жыл бұрын

@@andrewm4951 i have same problem. my oem flywheel seems to be on 2 o'clock instead of 1 o'clock and when my kit came in the flywheel is at 1 o'clock. what kit did you use and from what website did you buy it from?

@Ropeman302

10 ай бұрын

Yes I’m facing this same problem it’s at 2 o’clock Thinking I’ll just take it to machine shop get the key way cut out

i have already installed this one. can i bypass it and install a simple on-off switch and a car ignition button? i want to mount the pressure washer in my van and have the ignition near the door.

@magicman_metal_fab

11 ай бұрын

Sure. Why not bud.

@sharpblad3

11 ай бұрын

@@magicman_metal_fab thanks, I hope I get it right 😅

Should you use compound to Lap the new flywheel to the shaft?

@magicman_metal_fab

2 ай бұрын

Good question. I didn’t but couldn’t hurt I guess

1424 how did you resolve?

Does this kit include a voltage regulator, so the battery doesn't boil away?

@magicman_metal_fab

3 ай бұрын

Negative

Does the starter battery get recharged as the engine is running? also where are you mounting the battery?

@magicman_metal_fab

7 ай бұрын

Yes the battery would get recharged off the stator coil that is installed provided it’s hooked up properly.

Good job. I did have to go back and play it in steps to see the charging wire magickly appear in place @frame 9:22. Also, to get how you aligned the starter to stop it from binding (not like a chevy with starter shims) Golf Cart mod to gas? Looking forward to finding this video.

@magicman_metal_fab

10 ай бұрын

I appreciate you brother. Thank you. 🫡🤙🏻

Good video. Thanks.

@magicman_metal_fab

Жыл бұрын

Glad you enjoyed bud. 😊

Thanks for the Vid 👍Can Someone explain why it won't work if the pickup on the new flywheel is at two o'clock when the original is at 1 Thanks

@magicman_metal_fab

Жыл бұрын

If the pick up is supposed to be a 1 o’clock but you have a pick up at 2 o’clock it will ignite the gas in the combustion chamber at the wrong time and more than likely not run. Ignition timing is very specific on every single engine. Hope this helps bud. 😊

@pauldavis9808

Жыл бұрын

@@magicman_metal_fab Helped a lot much Appreciated Mate.

@bjusticeforever

10 ай бұрын

@@pauldavis9808 Assuming you have the post-2011 GX390, the flywheel is different and so is the coil. If you use a pre-2011 starter kit, you can replace the coil with a pre-2011 coil and a low-oil module and it should work (most people don't like to do this because of the wiring issues.) OR you can heat up the ring-gear and put it on the old flywheel (provided the old flywheel has the charging coil magnets built in.)

*NICE VIDEO!*

@magicman_metal_fab

Жыл бұрын

Thank you sir. 😊

Having an issue after the install. Starts up but now it runs rough and backfires. The choke has to be in a sweet spot and then it wont stay running. Engine is new with 50 hours on it. Seems like a fuel issue. Could this be from incorrect wiring?

@magicman_metal_fab

10 ай бұрын

No. Probably a clogged carb. If it will run 1/2 choked then that’s your issue. Check gap on ignition coil. Also double check if your flywheel matches.

@drakelundquist1370

10 ай бұрын

@@magicman_metal_fab carb was clean throughout. Gap was set correct and double checked. The flywheel should be the correct one. What do you mean by this?

@drakelundquist1370

10 ай бұрын

The flywheel was the same size and everything with the factory one

nice job

@magicman_metal_fab

Жыл бұрын

Thank you 😊🤙🏻

Will this work o DeWalat pressure washer and does it have a charger kit?

@magicman_metal_fab

3 ай бұрын

Has to be a Honda gx390 engine. Yes it has a charging coil in the kit.

hi nice video but the only think that i needed is missing, how to connect the battery...i have motor with starter but no connecting cables...i think minus to grownd and plus to the starter -? thanx

@magicman_metal_fab

Жыл бұрын

Yes. You will need 2 wires. One from battery positive to starter, then a ground from battery to the motor bolt.

@dreambigTV_original

Жыл бұрын

Thanx 😊

@magicman_metal_fab

Жыл бұрын

@@dreambigTV_original if you have any questions just let me know bud. 😊🤙🏻

Is it able to start the enginge with a powerbank instead of a Car battery?

@magicman_metal_fab

10 ай бұрын

As long as it’s 12 volts. Absolutely

I’m installing this kit today, I have taking everything apart. Everything looks like it works fine except for the coil. Where my coil mounts and the coil they gave me in the kit will not lineup to put my screws in,, is it possible that I can you reuse my old coil with this electric start kit? Even though mine was a pull start?

@magicman_metal_fab

Жыл бұрын

Absolutely. The charging coil not the ignition coil correct?

@novarestoration9023

Жыл бұрын

@@magicman_metal_fab lol that’s what it is. Lol. Got it TY

@magicman_metal_fab

Жыл бұрын

@@novarestoration9023 awesome bud. If you have any other questions fire away. 😊🤙🏻

@novarestoration9023

Жыл бұрын

OK you asked for it. Lol So what do I do with the on off switch that is on the cover? It’s actually in the way when I mount my key housing. Where did you get that black piece to cover the hole where the on off switch was

@magicman_metal_fab

Жыл бұрын

@@novarestoration9023 that original switch comes off and the black cover fills the hole. Easy peasy. Keep them coming. 😊🫡

About how long does this take to do remember ots my first time lol but I'm good with my hands

@magicman_metal_fab

Жыл бұрын

Roughly 2 hours give or take. Probably less bud.

I have on/off toggle switch on the side, should I just cut it off and wired it with the kit? Thanks

@magicman_metal_fab

Жыл бұрын

I would. The kit gives you everything you need to do it correctly bud.

@XteriorCleaningService

Жыл бұрын

@@magicman_metal_fab That's what I thought. Thanks!

@duresterichard6960

Жыл бұрын

Cool video man, thank you.

@magicman_metal_fab

Жыл бұрын

@@duresterichard6960 my pleasure bud. 😊🤙🏻

Do you reckon it would work in the GXV390?

@magicman_metal_fab

4 ай бұрын

Not sure bud. Definitely worth a shot

Is it possible to install self start kit in gx270 engine of honda

@magicman_metal_fab

8 ай бұрын

Anything is possible. I have not tried that.

I'm doing this on my 8 HP Honda snowblower. Yes I know it has 120 volt starting but I don't want to be 30 yards down my lane and have an engine stall. Besides I'm old and don't like pulling that big engine over. lol.

@magicman_metal_fab

6 ай бұрын

Heck yea!!! Smart man. 😆🤙🏻

@Lyndonkb11

5 ай бұрын

@@magicman_metal_fab question, if I install one of these, can I somehow wire in just a plug for an extension cord for power? Or do I have to use a wire? Wanting to do one of these on my Honda GX engine on my snowblower. Thx 🙏

@Lyndonkb11

5 ай бұрын

@@magicman_metal_fab do you know??

@magicman_metal_fab

5 ай бұрын

@@Lyndonkb11 the system operates on 12 V. If you’re trying to use 120 V it won’t work you would need some kind of inverter. AC voltage and DC voltage is totally different.

That’s great thanks .

In my case for this I’m going to use it for the Track Tow Kart it’ll be faster to start the engine like this rather than pull starting it

great information

@magicman_metal_fab

4 ай бұрын

Thank you 🫡

good thought we the loctite....I'm hoping to do the same with a G400.

@magicman_metal_fab

Жыл бұрын

Thanks bud. 😊🤙🏻

Mine will start by pull, but won’t crank from the ignition switch itself, I have same exact setup as yours

@magicman_metal_fab

Жыл бұрын

Check your grounds. Ground from the battery directly to the block of the engine.

@magicman_metal_fab

Жыл бұрын

Also use a test light to verify your getting 12 volts to your starter at the post.

Can you still use the pull start. will it still work

@magicman_metal_fab

Жыл бұрын

Yes. It still works bud

I'm buying a used Honda GX390 that has an electric starter on it. How can I remove it.

@magicman_metal_fab

5 ай бұрын

Just take the starter off and nothing else bud.

what about the bracket 0:34. is it useless?

@magicman_metal_fab

3 ай бұрын

No.

What happens if my magnet is in the 2 o'clock position?

@magicman_metal_fab

Жыл бұрын

Your engine won’t run right. Timing will be off.

What year model is your engine???

@magicman_metal_fab

Жыл бұрын

I believe early 2000s

how did your flywheel come off so easy 😰. the nut is a wrist breaker on mine

@magicman_metal_fab

7 ай бұрын

Use an impact on the nut. Maybe a little bit of heat. 🤙🏻🫡

@BigTig19

7 ай бұрын

@@magicman_metal_fabi had the wife lock the wheel up with a pry bar and used some leverage and muscle. thanks for the video by the way.

I’m good with just pull starting it.

@philliphall5198

Жыл бұрын

My light weight girl had trouble pulling it so I installed the kit and it was so easy I was shocked

Where is the battery for the starter placed?

@magicman_metal_fab

Жыл бұрын

You can put the battery where ever you like my friend.

@TheArmorersChannel

Жыл бұрын

@@magicman_metal_fab I figured that out. What type of battery did you use? Where was it mounted in this video? Thanks

Cool! Looks like the kit is only $75 which is very reasonable.

@magicman_metal_fab

Жыл бұрын

Yes sir. How can you go wrong? Super easy to change over too. 😊🤙🏻

@frankpirrone6032

Жыл бұрын

Why do the kits say 2011 and earlier models? I can’t find any for a newer motor

@magicman_metal_fab

Жыл бұрын

@@frankpirrone6032 good question bud. I’m sure it will fit newer motors. Nothing really changes year to year. 🤷🏼

@philliphall5198

Жыл бұрын

Cost me 89.00

@markhueffman6859

Жыл бұрын

@@magicman_metal_fab I believe the key position is slightly different on newer ones made after 2011. Will affect the timing. Haven't done the conversion yet but have one on the way for my generator.

Can you send the link for the kit please?

@magicman_metal_fab

Жыл бұрын

It’s in the description of my video. 😊🤙🏻

Will this work on a generator???? Part number please

@magicman_metal_fab

Жыл бұрын

I believe I put a link in the description bud. Yes it will work on a generator.

I just love hearing an American speaking Millimetres , Us English had to learn this language 50 years ago xxx

WILL THIS WORK ON A GX160 FOR A GOKART/?

@magicman_metal_fab

Жыл бұрын

The kid that I ordered was specific for my model engine. If you look on eBay, they’ll probably have one for your engine too. 😊🤙🏻

Is it positive or negative ground?

@magicman_metal_fab

Жыл бұрын

Negative ground.

Only Works on diesel motor?

@magicman_metal_fab

2 ай бұрын

No gas only

Where to find the starter kit

@magicman_metal_fab

2 ай бұрын

In the description of the video

We have used the kzread.infoUgkxOTeIs0vv4_9B5hsmnLsk9r930uDQLu_Y for probably 30 hours with our camper and it’s been great! The noise level is really only noticeable when running the AC and other appliances like the microwave, hair dryer, or coffee pot. It’s not huge like other ones and it has wheels so even at 90lbs, I can move it!

@magicman_metal_fab

8 ай бұрын

Sweet

Can this work on DeWalt

@magicman_metal_fab

5 ай бұрын

Not sure bud.