New: Order an EcoFlow Kit from our site and you can schedule a FaceTime call with us to help with installation!

I installed Ecoflow Powerkit and added 3,150 watts of solar on my 34ft Avion Travel Trailer last June. I have 15kw of batteries and run my air conditioner on the system. Live full time in our rig. In the over 9 months I have not plugged into shore power or a generator. Totally off grid. Full time. Love my Ecoflow Power Kit!

@kokomovans

3 ай бұрын

That sounds like an awesome rig!!

Amazing work! Just one tip - when you install the alternator charging cable, you need to move that 100A fuse as close to the van battery as possible. If you have a cable run through on the chassis on the section of cable BEFORE the fuse - you’re gonna burn your van to the ground.

Today is shore power, final hole making…lol. Without your video, we would have been stuck and too scared to install our ecoflow. Thank you for being a great teacher. Have a great weekend and stay safe.

What a great advancement in power for RV life. Hats off to EcoFlow!! All those blue box’s and exposed wires and lugs gone. This is the future.

Thank you for giving us the confidence to install our own EcoFlow…I love it.

@kokomovans

2 ай бұрын

You're welcome Bonnie we're stoked to help!

I have the independence 15 Kwh kit . This video pretty much spells it out, Great system. For me in a off grid situation, it works great. It is rated for 3600watts it could put out

@kokomovans

9 ай бұрын

Thanks for the input here! What do you use instead of the smart distribution panel? A regular breaker box?

@rccosplay3249

9 ай бұрын

Yeah regular breaker box, I'm looking forward to setting up the Smart Box for monitoring and control.

@christopherbrandler508

7 ай бұрын

Thanks for comments.... How is this system working for you now that you've had it in a a while? Im hearing of some people having real troubles.

@rccosplay3249

7 ай бұрын

@@christopherbrandler508 Working great as expected in the beginning then some trouble after 2 months of normal use. 1st issue was not charging to 100% it would stop at 85% ??? 2nd issue was a error code of AC bus overload and the unit would bug out when AC input stopped and inverter took over, it was much more than 30ms. Twice it shut down completely and re-started by itself??? safter contacting Ecoflow, they had me do a battery calibration test and download the latest firmware... Happy to report all is ok now, Ecoflow customer support seems pretty good 👍

@kokomovans

7 ай бұрын

Glad the firmware update fixed your issues!@@rccosplay3249 For anyone else reading this, a firmware update is recommended for any new system you buy and is easy to do through the ecoflow smartphone app.

Soft start for the win. Great video!

@kokomovans

9 ай бұрын

Thank you!

That system looks awesome.. I want that in my next build

@kokomovans

10 ай бұрын

🤘 Ready to make it happen

Perfect. Thanks!

Thank you Sir! I am almost done installing my system. Your video helped me immensely.

@kokomovans

3 ай бұрын

So glad I could help!!

Is it possible to „reverse charge“ your vehicle battery via the alternator charger of the PowerKit in case the vehicle battery is depleted?

Well done...install and video.

@kokomovans

8 ай бұрын

Thank you! Glad to help

Is there anyway to implement this system to an existing RV AC/DC system without using the smart distribution panel?

@kokomovans

4 ай бұрын

Yes you’re able to use your existing distribution panel in your rv. The wiring that goes to the distribution panel is standard AC/DC wiring. Please reach out on our website and we can help!

Instasubbed! ❤ Great and clear video

@kokomovans

10 ай бұрын

Thank you!

Great video - thanks. Quick question - do I need to ground the power hub to the vehicle chassis using the earth stud? If not, why not? Thanks!

@kokomovans

8 ай бұрын

I’ve seen lots of debate going either way. I’ve heard it doesn’t matter for the 12v system or you only need to be grounded when plugged into shore power. Too much mixed info for me to give you a solid answer sorry. Go ahead if you need the peace of mind.

Dude youre awesome

@kokomovans

Ай бұрын

Dude thanks!

It looks like a great system. But for me, I would need more amperage available on the DC panel because it seems wasteful to run A/C off the AC line. I'd only want to run 120v outlets on the AC line and keep all other loads off of the inverter. Perhaps 100A DC total would do it, with 70A on one line as a rough guess.

Thank you I did

Hola estimado, soy de Chile y compré este equipo más los paneles solares, generador inteligente hasta ahí todo bien carga perfecto las dos baterías de 2K, el único problema que tengo es que no me carga las baterías por medio del alternador del vehículo sino es con el modo carga pasiva ósea el motor en relanti es decir detenido. No sé por qué ocurre esto, me puede ayudar a configurarlo. Gracias 🙏

@kokomovans

14 күн бұрын

¿Se carga mientras conduces? No se carga automáticamente mientras el motor está en ralentí. Translated in Google translate

The only thing I don’t like that I see, is you using ANL audio fuses? I would try blue Sea fuses.

Should I run a ground wire from the power hub to the van thank you

@kokomovans

8 ай бұрын

Ecoflow says it’s not required but it won’t hurt to go for it 👍

will the smart distribution panel work with the eco flo delta pro?

@kokomovans

8 ай бұрын

No, that is a separate system

I’m planning to install an secondary 48V/100A alternator for charging. How does WS500 controller setup to work with PowerKit alternator charging?

@kokomovans

9 ай бұрын

I’m sorry I don’t believe eco flow currently supports connecting to a wakespeed controller

@brucechen2388

8 ай бұрын

I Think it supports!

What AC unit was that? Also, how long will the 10 kw system run it for?

@kokomovans

9 ай бұрын

This one: amzn.to/3F0i5YS Ran it all night and the battery only got down to 60%

On my power distribution panel, there are 12 fuses, 12 positive lever connectors but only 8 negative lever connectors. If I have more than 8 lines - where do I connect the 9-12 negative wires?? Can they be double upped??

@georgebeebe2385

4 ай бұрын

This on the DC side.

@kokomovans

4 ай бұрын

Yes they could be doubled up on the negative side. There’s also a negative output screw mount next to the negative pinch connections. You can put a ring terminal on extra negative wires and mount them on there.

@kokomovans

4 ай бұрын

Make sure you don’t use the negative input screw mount

@georgebeebe2385

4 ай бұрын

Thanks!

@kokomovans

4 ай бұрын

You’re welcome!

Thx for your Video, good inspirations! i have a Power Kit Independence Kit with one 5kWh battery installed in my van. Unfortunately, I have noticed that the battery discharges by around 15% within 24 hours without a load being connected. I started on Sunday around 5pm with 50% capacity. Yesterday (Wednesday) only 6% charge remaining. No consumer used electricity during this time. Only DC was activated. Losing 44% of a 5 kWh battery in standby within 72 hours is not really energy efficient, is it? what is your experience?

@kokomovans

6 ай бұрын

Hi Oliver, I’d see if you have a firmware update available and reach out to ecoflow about this through the customer service chat section on their app. This is abnormal and I’m sure it can be resolved.

@OliverMartens

6 ай бұрын

@@kokomovans Thx for your reply! Firmware ist up to date... Fresh answer from Ecoflow-support: "The PowerHub will consume 20W of power when the DC output is turned on, in addition to the appliances. So it seems that the LFP battery loss is within the normal range." 20 watts correspond to 480 watt hours per day, which means that the 5 kWh battery is empty after 10 days of idling at the latest...

@kokomovans

6 ай бұрын

Interesting! I always have the systems charging with solar constantly so I guess I’ve never noticed it. Hopefully you’re able to leave the dc turned off when you’re not using it.

@OliverMartens

6 ай бұрын

@@kokomovans Solar in sunny months may be no Problem, but during winter and rainy days... I need DC constantly for GPS, alarm and parking heater (remote start). With a normal Lifepo4 no problem for weeks in Standby. I should Charge and discharge the battery 2-3 times from 100%-0% now as a suggestion from ecoflow. I Just Start charging...

@kokomovans

6 ай бұрын

On the few rainiest days that could be a problem but most cloudy days you still charge enough to counteract that small drainage as long as you don’t park under a tree. And yes a custom Victron system would definitely be better. The ecoflow system is for people that want the plug and play ability. I’ve personally never heard any of my customers having a problem with ecoflow though.

Does the location of the fuse for the Alternator cable make any difference ?

@kokomovans

8 ай бұрын

No, it just has to be somewhere between the ecoflow system and the van starter battery

@normanroberts6241

8 ай бұрын

Thanks for your help @@kokomovans

Can I mount the batteries side by side?

@kokomovans

8 ай бұрын

Yes absolutely

Great video . Thanks. Do I have to use a 100 amp fuse for the alternator 6 guage line? I want to locate my fuse in the battery box with a simpler in-line set up and 100 amps seems like overkill. How about 40-50 amps? Thx

@kokomovans

2 ай бұрын

You’ll want something higher than that because you’ll regularly be pulling roughly 70 amps charging from your alternator

Did I see Romax in this video?

@kokomovans

3 ай бұрын

Yes Romeo wiring for the 120v system

Thank you for this video! Massive help🫡

@kokomovans

8 ай бұрын

You’re welcome!