How To Install Dirt Bike and ATV Graphics
Тәжірибелік нұсқаулар және стиль
Get your Attack Graphics graphics kits here:
www.rockymountainatvmc.com/Sa...
How to install ATV and motorcycle graphics kits the right way using Attack Graphics from Rocky Mountain ATV/MC. We show you how to install custom, pre-printed number plate backgrounds in this video for a dirt bike. We stock a huge variety of graphics for your ATV, Dirt Bike, and UTV. You can customize these graphics to your own personal style.
Click Here To Subscribe To Our Channel!
/ @rmatvmc
Follow Us On Social Media!
FACEBOOK: rmatvmc?utm_...
INSTAGRAM: rmatvmc?ut...
TWITTER: RMatvmc?...
Пікірлер: 100
You’ve made my installation today a million times easier with that tip to cut out a strip in the middle. I am grateful for people on youtube like you sir. Liked and subscribed.
Thank u so much. I’ve been doing this for 10+ years and I’ve never thought to cut a strip out of the middle
My go to refresher video I rewatch everytime I get some new graphics
Heat gun? More like tactical hairdryer
@rmatvmc
5 жыл бұрын
hairdryer will work, just takes a little longer to heat up the graphics.
@MatthewC137
4 жыл бұрын
That's an assault dryer. It's probably illegal in California.
@jakebr772
3 жыл бұрын
@@MatthewC137 shhh your not supposed to let them know about that it has to be a secret dont want to get him introuble
@user-lm8fx6kc1b
3 жыл бұрын
@@MatthewC137 😁
@InTheField217
Жыл бұрын
😂😂😂😂😂
Thank you for taking the time to make this video. Cutting the middle out of the backing paper was very helpful especially situating the graphic initially.
Thank you the tip of cutting out the centre piece will be invaluable when I install for the 1st time.
@rmatvmc
4 ай бұрын
Glad it helped!
That tip with cutting the strip down the middle is brilliant! 👍 Thank you sir for the video!
@rmatvmc
9 ай бұрын
Glad you liked it! Thanks for checking out the video and leaving a comment!
Down here in Vegas, I like to do it in the summer. let the graphics sit in the sun for a little so its warm, then install it in the warm garage. Seems to make the graphics more pliable on the tricky spots.
Thanks, I just got new graphics for my 97 CR250R
Wow, your technique made installing my new graphics exponentially easier. Thank you.
Awesome tutorial. Thanks!
Exellent video. It made my first attempt at this, so easy. I think the warm sunshine may have helped too. Like I said. Great Vid
Helped a lot, great idea to cut the strip out the middle.
very informative video. thanks!
I use a heat gun for the decal to conform to edges of the panels.
Get your Attack Graphics custom graphics here: www.rockymountainatvmc.com/Sales/51/Attack-Graphics?
Awesome tips 🤙🏼
Genius. Wish I would have known this 40 years ago. Makes sense. I suck at graphics
@nate8249
Жыл бұрын
How the hell are you putting graphics on dirt bikes 40 years ago
@cameronmartin6217
10 ай бұрын
@@nate8249he’s that guy bro
@clvrswine
5 ай бұрын
*? @@nate8249
would it be possible to apply graphics in a way as applying tint to a car?
Is their a trick to doing the tank decals? Has slits and all but still bubbles up and wants to come off. Told its gas fumes and nothing can do?
Awesome video bro.
Smart COOKIE. Thx mate
Can you use brake cleaner for a contact cleaner?
I was gonna get some rmatv graphics but I couldn’t pass up the 25% off Labor Day sale at dcor
Which application do you use for this graphics design ??
I try my hardest and still always a few bubbles somewhere. I would think by now someone would have figured out a really easy way but nope.
Wowww wayyyy better than my method, my method was 12 pack of trulys, eyeball everything and cut “Vs” out the plastic when it bubbles or overlaps lol hahahah
@aaronthiessen1922
3 жыл бұрын
I just drill holes from the other side when there's bubbles then push them out lol. No one will ever notice
What kind of contact cleaner?
awesome!!
Anyone knows how to install graphics on a plastic fuel tank, I install it but got bubbles in a few hours, is there anyway to cure the tank to avoid transpire, thanks so much 🤪
Great tips but everyone knows stickers make you go faster AND. Add horsepower. Facts bro.
@rmatvmc
3 ай бұрын
Facts!
Extremely helpful, thanks Rocky Mtn!
@rmatvmc
6 жыл бұрын
Thanks for watching!
I'm getting these graphics for my ttr
great help, thanks guys
I like that Hunter Syddall memorial sticker on the fork #ride4hunter 30 🧡
@rmatvmc
6 жыл бұрын
Good eye there sir! Thanks for watching.
Its only right i put my rocky mnt graphics on by watching their tutorial video
What the. best way to glue back down a graphic that's lifted? it's right where the knees rub the radiator shroud. I was thinking contact cement, rubber cement, shoe goo.
@BoostedFB6
4 жыл бұрын
Get a new graphic, if there’s been water or dirt on the sticky surface its never gonna stick the same without using something that will damage the plastic
I use some of methods to install decals like how i do on Traxxas and Tamiya models.
this is the way!!!! Like the mandolorians say. Seriously though, will never use another technique. This cutting the center of the backing out makes a HUGE difference in time and quality of application. THANK YOU
LOVE THAT GRAPHIC
Easiest method by far
Best video I've found!!!
@rmatvmc
5 жыл бұрын
Glad you liked it. Thanks for watching!
What type of contact cleaner are you using ? Its not brake clean chemical is it?! That would damage the plastics? Drop a link please ! Thank you
@rmatvmc
4 жыл бұрын
We used PJ1 Contact Cleaner in this video. You can check it out here: www.rockymountainatvmc.com/parts/pj1-professional-contact-cleaner-p
Now may seem like a stupid question but is there anyway you can preserve your factory graphics? Or can you lay your new graphics over top. I just don’t know if I am going to regret taking my factory graphics off.
@rmatvmc
3 жыл бұрын
That's up to you, you can lay them on top but it's probably not going to look as good. I would buy a new set of plastics for the new graphics if you want to keep the factory ones too. -Charles
Sick just bought a load of parts from you for my yz125
Please share the website where to download the template?
9:03 your bike’s gonna be looking like a million bucks The blind guy on marketplace: Would u take 500$ and ill come and get it tonight
@RideOrDiiie
3 жыл бұрын
Forgot to add “cash” after the 1/4 of the posted price offer
@user-lm8fx6kc1b
3 жыл бұрын
Those new graphics wouldn't be shit to a blind man
I just cant line it up at all
I just got my attack graphics for my first dirt bike..... I sucked at installing them
@ratbrain7743
3 жыл бұрын
me too. I've sucked since 76
Is there another product I can use other than the contact cleaner you can recommend?
@nickmclay
3 жыл бұрын
Alcohol
@isispan6804
3 жыл бұрын
@@nickmclay do u think hydrogen peroxide would be good
@SpecSOnYoutube
2 жыл бұрын
I use break cleaner, works very well but takes some of the shine away from the ‘plastics’.
@GamerGavin04
11 ай бұрын
@@SpecSOnKZreadprobably because that stuff eats away at the plastic, dont use brake or carb cleaner on the plastics if you care about them.
@clvrswine
5 ай бұрын
Brake
🤘🏻
If you use application fluid, don't use to much or it will never stick and it will bubble.
@clvrswine
5 ай бұрын
*too
Looks faster now.
My first time applying graphics I tried this method on one side and it left me with some wrinkles where there were creases in the plastic and numerous bubbles. On the other side I tried the soap and water spray and it came out much better and easier to apply
@copenhagenredneck7885
3 жыл бұрын
How did the soapy water method hold up after riding? Not throwing shade genuinely curious cause I’m about to order graphics for my 2020 and this method seems a little difficult
@ReDD0311
3 жыл бұрын
@@copenhagenredneck7885 it felt difficult as well, but I have seen this method used in other places. I actually haven't been able to ride yet since I installed the graphics but they look and feel like normal so far. I'll update after my next ride.
@copenhagenredneck7885
3 жыл бұрын
@@ReDD0311 awesome man thank you
@cloudnurdz6331
Жыл бұрын
@@ReDD0311 so how did it hold up i'm fixing to try the same thing
@ReDD0311
Жыл бұрын
@@cloudnurdz6331 zero issues with the soap and water side
There is a difference between a razor blade and a utility knife blade.
@caidenzagala7420
2 жыл бұрын
And
And that's how you install the ugliest graphics ever!
@AdrenalineRushMX
4 жыл бұрын
i have to agree whit that lol
@iwearaxo7721
3 жыл бұрын
I disagree, its better than plain plastics though
How about I just send you my plastics and graphics and $100 and you can do it for me 😂
Windex!!!
@jevinmccully2637
3 жыл бұрын
Cleans it hood?
Dig your #....
Factory method 😉 2 drops of dish soap 16 oz water Light spray graphic Light spray plastic Apply graphic into position Squeegee out water from center using light heat from heat gun if necessary
Application fluid 😂😂u mean soap water
Bro graphics suck to put on. Took a fat L