We skipped the instructions and went right to your video. Thank you!

@FixEverythingYourself

Жыл бұрын

😁👍

I loved ur pool setup vid! Sooo helpful! I’m 15& my 12yr old bro and I were able to set ours up alone !!

@FixEverythingYourself

Жыл бұрын

Wow, the two of you did it yourself !?!? That's fantastic! Great job!

My Bestway 16x10x42 pool didnt even have any instructions on how to set up the pump. I was so frustrated until I found your video. Going to try and set up the pump now. Thanks for this great video.

@FixEverythingYourself

Ай бұрын

Great. Hope this gets you up and running.

Oh my gosh I had forgotten to unlock the hose. Thank you!

@FixEverythingYourself

Жыл бұрын

Glad you got it figured out!

Can anyone tell me why a green light started flashing on mine.Pump turns on then kicks off instantly I clean the filter daily. The pump is only 2 to 3 weeks old. I can’t find anything in troubleshooting that even talks about a green flashing light.

Why does my pump don't suck

Looked for you for an hour. Thanks!

@FixEverythingYourself

2 ай бұрын

Glad you found what you needed 👍

Thank you!! Of all the videos, this was the best.

@FixEverythingYourself

Ай бұрын

Thanks!

The hoses on my several years old pump are cracking. We bought a used 18"×48" Coleman Steel aboveground pool 3 years ago. Pool is still perfect, as is pump, its the hoses. So i can't find the exact pump that came with the pool, this one will work, I am hopeful. Our pool has same connection set up as yours. Oh, love the background accompaniment

@FixEverythingYourself

Жыл бұрын

😄👍

Great video thanks 😊 👍

@FixEverythingYourself

Жыл бұрын

👍🙂

Does anyone know or have a video on how to work the timer on a 18 foot flowclear pump

I happened to think, you could just raise the pump assembly above the water level and support it on a box or something to change the filter if they can't justify buying another valve. (Great video by the way!)

@FixEverythingYourself

Жыл бұрын

Yes, raising the pump will work; it's just not very convenient. Thanks for the comment!

Thank you for your clear explanation on pool pump connection. Do you have another video for a salt system connection?

@FixEverythingYourself

Жыл бұрын

Sorry, no. Just this freshwater pool and associated items.

The water pumping back in the pool has very low pressure…any advice or did I get a lemon…it’s not the filter cartridge…this has been the way it is since day one

@FixEverythingYourself

Ай бұрын

The pump is very weak and cheap. If the filter hasn't been cleaned in a while (daily), it'll be weak pressure.

We bought the Sam’s $400 pool with Pom-pom filter. Put it up for the winter. All hoses are cracking/leaking, all o-rings leak. Any idea where to source QUALITY replacements.

@FixEverythingYourself

4 ай бұрын

I upgraded mine to a sand filter last year. Bought it off of Amazon (amzn.to/4alXGLN) and it's cheaper now than when I bought it last year. Worked great all last summer but I haven't yet hooked it back up. I followed the installation instructions from this other YT video (kzread.info/dash/bejne/hnl6prGiiq7Xd8o.htmlsi=fy4hlUMiSFGkKt6N). I've bought replacement hoses for my pumps on Amazon. They're all about the same quality but what I do is make sure the hoses are supported in such as way as to not be pulling at their connection points. In other words, I'll put a bucket or a tray under the hoses at the midpoint to help straighten the hose and not have as hard a bend where they enter/exit the valves. Keeps them from cracking as quickly.

@mitch78704

3 ай бұрын

@@FixEverythingYourself Thanks for the rec

This was very helpful! Thanks for sharing 😊

@FixEverythingYourself

Ай бұрын

You're welcome!

Thank u I’ve done this numerous times i don’t know why i mixed the hoses up …rushing probably…numerous videos later i came across yours today the outtake valve was sucking water in instead of out i had the short hose for the outtake once i changed the hoses it worked ☺ if this happens to anyone check your hoses it really does matter I just can’t believe I did that!!!!! Thanks again and yes just setting our 20x52 pool 🏊‍♀ up now better late than never…

@FixEverythingYourself

11 ай бұрын

I hope you live somewhere hot and still get several weeks of use this summer!

Video was so helpful thank you !! Do we need to keep the pump running all the time?

@FixEverythingYourself

Жыл бұрын

No, pump doesn't need to run constantly. If the pump is the right size for your pool, it'll need to run 8-10 hours per day to cycle all the water through the filter each day. And prime time for running the pump is during the day when people are (or would be) swimming. But doesn't need to run all night.

@FixEverythingYourself

Жыл бұрын

Thanks!

Another "thanks" to you for posting that video about the pumps. I had mine hooked up properly , but the manual was not that easy to understand about letting the air out. The Bestway / Coleman pools are great, but I find their instructions are lacking details that *I* think would be helpful. Do you leave your pump running 24/7 ? I had a smaller pool, and the pump actually had a timer attached to it. This one does not. Again, something that most people probably wouldn't think about, but people like me might like to know for clarity :)

@FixEverythingYourself

20 күн бұрын

No, my pump (which I've upgraded) only runs 10 hours per day. That's pretty standard. Also, my initial pump from Bestway had a timer that was part of the plug. Yours doesn't have that?

@l.emerson3699

20 күн бұрын

@@FixEverythingYourself I'll double check when I get home but I didnt notice one on this pump. My old one did. Do you run it at night or during the day?

@FixEverythingYourself

19 күн бұрын

@l.emerson3699 only during the day. From about 10 a.m. to 8 or 9 p.m.

Seriously. Ty. I literally finished installed that exact pool today. Everything from roto tilling ground to perfectly level treated lumber deck to sit posts on. What i could NOT do, are the logistics of putting this pool together without you today. Ty again. To note, i did it by myself with your help

@FixEverythingYourself

Ай бұрын

Thanks for the comment! I really enjoy hearing when a video has been helpful to someone. Believe it or not, my kids had some good ideas as we put this together, so I'm glad to pass those on!

Thanks for your video.

@FixEverythingYourself

Ай бұрын

YW 👍

This was so helpful. Thank you 🙏

@FixEverythingYourself

Жыл бұрын

Great! Thank you!

Thank you for this video, I do notice that both B ports aren’t suctioning? Is that normal? Port A seems to be pushing out water just fine though.

@FixEverythingYourself

Жыл бұрын

There should be water going to the pump from both B ports. It may not feel like there's much suction if you feel them inside the pool so check each hose to see if there's water flowing through both.

@maryannesmitherman4167

Жыл бұрын

@@FixEverythingYourself there is water in both hoses! So you might be right! Thank you so much for your reply!

@FixEverythingYourself

Жыл бұрын

YW!

The part in the pool that supposed to suck the water in feels like it’s vibrating but it’s hard to see if water is going in. We can see it come out the other side. Is that normal?

@FixEverythingYourself

Жыл бұрын

Hmmm, vibrating is a bit weird. That may indicate that there's a kink in the line or somehow the water isn't flowing in properly. Mine doesn't vibrate. I recommend making sure there are no kinks or sharp bends in the hose. Maybe also make sure the water is flowing downhill to the pump as much as possible. If the pump is elevated and has to suck the water uphill, that could be causing a lack of water to get to the pump and possible vibration. Another thing is to make sure that the outlet hose (into the pool) isn't kinked and that the valve at the pool connection is in the unlocked/open position (i.e., water can flow into the pool). It's possible that if there's a blockage of some sort on the outlet, it would cause problems on the inlet side, too. Last thing I'd recommend is to make sure there's no air in the pump. This can definitely cause noise and possibly vibration problems. To check/remove air from the pump, turn the pump off and make sure any valves on the inlet or outlet hoses are OPEN. Then unscrew the top knob on the pump until you hear air hissing as it comes out and/or water comes out. Once the hissing stops and only water is coming out, you know that you've removed all air.

Mine seems to consistently fill with air once I switch it on and is very noisy with a reduced outflow. If I open the air release while it’s on it seems to work a bit better. I can’t see how air is getting in as all connections look good. Any ideas?

@FixEverythingYourself

Жыл бұрын

With the pump off, look at all of the hoses and see if there's any air at any place in the hose. Perhaps the hose is trapping some air somehow. Try lifting the hoses off the ground (while connected) to see if there are air pockets somewhere. If so, you may just need to move the pump to a lower location or arrange the hoses a little differently to prevent this.

I see you installed the two filters inside the pool/water, I believe that was B & B. I have those two, but I also have a third porthole that is probably A (looks like its behind your ladder), does that need a filter inside the pool as well?

@FixEverythingYourself

Жыл бұрын

Yes, it also has what looks like a filter. That single one is actually the outlet from the pump.

@palomaquerida604

Жыл бұрын

@@FixEverythingYourself i figured it out now. Thank you! That A hose is leaking tho. I bought a new spout, so maybe that will fix it.

Where can I get the replacement hoses for the pool we were just given a bestway pool.

@FixEverythingYourself

11 ай бұрын

Should be able to get them on Amazon. Here are the hoses I think you're talking about: amzn.to/45RcKhK

Can you tell me what tiles the legs are sitting on so I can get them

@FixEverythingYourself

Жыл бұрын

The tiles were just some ones that were on clearance at Lowes that looked like they'd work. Nothing special. Perhaps I'd recognize them if I was in the store but maybe not. I think any solid tile will work if the ground is reasonably smooth and compacted beneath it. Good luck!

Can someone give me the name of the black screw part you use to tighten the lid? I'm trying trying to order another one

@FixEverythingYourself

Жыл бұрын

It's called a "filter cap retainer". Part number is P6(H1)115ASS16

Thank you was wondering why my pump wasn’t working I didn’t unlock the left side exhaust

@FixEverythingYourself

Жыл бұрын

👍👍

Oh. Looked that shut off valve you mentioned. 😮not sure how, where it goes for when changing filter. Think you could video that, please. I need visual.

@FixEverythingYourself

Жыл бұрын

I think you're looking for this video: kzread.info/dash/bejne/k39qqq5mkr3ef5M.html

Thank you. 😊

@FixEverythingYourself

Жыл бұрын

👍🙂

I connected the inlet on the A side and the discharge/return line to the 2 B's. I guess i got it backwards put it works fine. Do you think that is ok?

@FixEverythingYourself

Жыл бұрын

It's probably going to be fine but since it's easy to rearrange them, I'd recommend correcting it. I think the discharge port with the wider slots will do a better job discharging and, if it's reversed, won't stop some of the bigger stuff that the intake ports are supposed to filter out. But obviously it's working okay right now so I don't think it'll damage anything in the short term.

@ADG-pl7ur

Жыл бұрын

@@FixEverythingYourself thanks. I'll rearrange it.

Should the pump be running all the time or just for a few hours a day?

@FixEverythingYourself

Жыл бұрын

It needs to run long enough to filter approximately the entire pool. But unless you know how much the pump pumps per hour, that answer probably isn't helpful 😄. So I'd say 8-12 hours/day in the summer is appropriate. But doesn't need to run all night. And there may be a timer on the plug itself that you can set to the daily duration you want.

I don’t seem to have the attachment that was already installed on your pool for A

@FixEverythingYourself

Ай бұрын

Hmmm. That's a bummer. There are a lot of these on Amazon (amzn.to/4esCkyW) but you may want to contact Bestway first to see if they'll send you one. They probably will.

I need instrctions on part A hole..

Do you fill the pump with water first you didn’t say but you had water in yours at the end

@FixEverythingYourself

Жыл бұрын

Yes, before it starts. Open up all valves so water can flow in/out of the pump, and open the air-release valve on the top of the pump until no more air hisses. Then the pump is ready to turn on.

i need hardware to hookup hoses where do i find them?

@FixEverythingYourself

Жыл бұрын

All necessary hardware came with mine. That said, Walmart sells essentially these same pools, pumps, and other hardware so you may check there. Their pools are a different brand but nearly identical.

Why have a valve on the discharge?? I put mine on that tee on the suction side for cleaning filters so you can shut..

@FixEverythingYourself

Жыл бұрын

Without one on the discharge side, too, gravity will pull water back down to the pump when you open it to clean the filter.

@worship22811

Жыл бұрын

Can you show inside of pool fittings please mine are not correct I fear

@FixEverythingYourself

Жыл бұрын

Not sure what you mean but I can't add photos or additional video at this point. However, the video shows the components I install on the inside of the pool, and the hoses attach to the outside of the pool and go to the pump/filter.

Did the connection valve come with your pool

@FixEverythingYourself

Жыл бұрын

The tee without the valve did. I bought a tee separately that has a valve in it.

Is the valve where the water goes back in the pool suppposed to be under water ?

@FixEverythingYourself

Жыл бұрын

Typically, yes. It doesn't have to be but it would be noisy always hearing the water gushing in and splashing into the pool. The way these pools are designed, both inlet and outlet are below the water surface.

@christopherjimenez9758

Жыл бұрын

At the beginning of this video when you are attaching the return what is the other thing behind your ladder that looks the same

@FixEverythingYourself

Жыл бұрын

Are you referring to that black plastic part in the side of the pool? That's where the water coming from the pump goes back into the pool. I don't know what Bestway calls it - maybe a "debris filter" or something like that.

@christopherjimenez9758

Жыл бұрын

@@FixEverythingYourself yeah but you had to the one you were installing and then there was one further down I was wondering why there was two did not look like another hose was going to it

@FixEverythingYourself

Жыл бұрын

There are two inlet hoses going to the pump (and two of those plastic debris screens/filters), and one outlet hose going from the pump to the pool (and one debris filter - the one behind the ladder in the video). So yes, they all have hoses attached to them.

love the rooster 🐓

@FixEverythingYourself

Жыл бұрын

😁😁

How long you run the pump ? Date or night ?

@FixEverythingYourself

Ай бұрын

10-12 hours per day. Only during the day.

I’m missing the part that goes into “A” the strainer I think. Any idea what the part number is?

@FixEverythingYourself

Жыл бұрын

Are you referring to the plastic piece that's the shape of an 'L' and a hose attaches to it? It's called a "connection valve" but I'd call it the outlet valve. The word "valve" is definitely in the name.

@spfadden082711

Жыл бұрын

@@FixEverythingYourself no I have that part. It was the part that connected to it on the inside of the pool. Looks like a strainer

@FixEverythingYourself

Жыл бұрын

Yeah. It's either called a "debris screen" or possibly "aerator". Try any of those, including "strainer" like you suggest.

Did I miss the sand part?

@FixEverythingYourself

Жыл бұрын

This has a paper filter. Sand filters are much better but this pool comes with the paper kind.

Can you give me instructions on setting the timer please?

@FixEverythingYourself

Ай бұрын

First, plug it in. Then there are 5 lights on the plug. Each light represents 2 hours of run time per day. Most pools need 8-10 hours per day. Push one of the buttons on the plug (can't remember which) until 4 or 5 lights are lit up. The pump will now run that many hours every day, and it'll turn on at the same time each day as when you plugged it in for the first time. For example, if you do this at 8 p.m. tonight, the pump will turn on at 8 p.m. every night and run for 8 hours. It should run during the day instead.

@NancyJDavid

Ай бұрын

Thank you

What if the pump doesn’t turn on when getting plugged in

@FixEverythingYourself

11 ай бұрын

There are two buttons on the plug. One turns it on; one turns it off.

When swimming pump must work?

@FixEverythingYourself

4 ай бұрын

About 12 hours per day. During daylight hours.

@user-ot2ce4gu3q

4 ай бұрын

@@FixEverythingYourself every day? For 12hours? * I just swimming alone for 1 hour per day.

@FixEverythingYourself

4 ай бұрын

Yes, the pump needs to circulate the water to clean it and make it less likely for bacteria to form. Stagnant water, like pond water, is not good to swim in.

@user-ot2ce4gu3q

4 ай бұрын

@@FixEverythingYourself bestway pro 4m how many hours? 12?

@FixEverythingYourself

4 ай бұрын

At least 8 hours per day, probably. The instruction manual will tell you how long based on the size of your pool. But 8-12 hours is normal.

Water is continuously gushing out the lid. How can I stop it/seal it shut?

@FixEverythingYourself

11 ай бұрын

Are you referring to when you open it up to clean the filter? You'll either need to install a valve so you can shut off the water or you have to lift the pump to a level higher than the water in the pool.

@FixEverythingYourself

11 ай бұрын

Here's a video for installing a shutoff valve: kzread.info/dash/bejne/k39qqq5mkr3ef5M.html

@dekedrakasera9438

11 ай бұрын

@@FixEverythingYourself I opened it unknowingly. I just had it assembled Friday. I took a video of it. Idk how to describe it I can tell the water is receding inside the pool

@FixEverythingYourself

11 ай бұрын

@dekedrakasera9438 Got it. First, lift the entire pump higher than the level of the water in the pool. Maybe put it on a small table or something like that. That will stop the water. Then you have to take the circular gray lid (has a black rubber o-ring on it) and place it in the opening on the top of the pump. Then take the large gray nut (looks like a big ring) and screw that onto the top of the pump and lid. That's what locks the lid in place and will keep the water in.

@dekedrakasera9438

11 ай бұрын

@@FixEverythingYourself ok thank you. I will try that in the morning 🙏🏾

Where’s the (sand) filter?

@FixEverythingYourself

4 ай бұрын

This pool doesn't come with one, just this paper filter pump. Sam's Club sells nearly this same pool with a sand filter for $400. Just saw it yesterday.

@mitch78704

3 ай бұрын

@@FixEverythingYourself I bought the Sam's $400 pool. It MAY last you one season and then the hoses all spring leaks and the pump stops working too.

@FixEverythingYourself

3 ай бұрын

I bought the Bestway Steel Pro Max from Academy two years ago. The pump is cheap so I replaced it with a sand filter, as I noted. My hoses cracked, too, so I bought new ones. I still think I got my money's worth on the pool because it holds water and is so much cheaper than an in-ground pool. But I hear you on the low-quality nature of a lot of the accessories.

Why would there be a water cut off switch on the re-entry of the water?

@FixEverythingYourself

Жыл бұрын

Without it, water will flood out of the pool when you open the filter housing. So either the pump/filter would need to be higher than the level of the return hose, or a valve/shutoff is needed.

@allans7281

Жыл бұрын

Thx for the reply! Yes my return valve is alittle higher than water line( adds nice sound) i can see this valve useful for the exit valve. I simply discount the intake line to the pump and put it over the edge into pool. Strange the factory didnt hv a turn off valve for the exit hose.

@allans7281

Жыл бұрын

Thx for the reply! Yes my return valve is alittle higher than water line( adds nice sound) i can see this valve useful for the exit valve. I simply discount the intake line to the pump and put it over the edge into pool. Strange the factory didnt hv a turn off valve for the exit hose.

@allans7281

Жыл бұрын

Thx for the reply! Yes my return valve is alittle higher than water line( adds nice sound) i can see this valve useful for the exit valve. I simply discount the intake line to the pump and put it over the edge into pool. Strange the factory didnt hv a turn off valve for the exit hose.

@allans7281

Жыл бұрын

Thx for the reply! Yes my return valve is alittle higher than water line( adds nice sound) i can see this valve useful for the exit valve. I simply discount the intake line to the pump and put it over the edge into pool. Strange the factory didnt hv a turn off valve for the exit hose.

Thank you so much for this vid, the directions it came with were trash!

@FixEverythingYourself

Жыл бұрын

You're right, the directions on most of the pools are terrible. Glad this helped!

That pump is terrible. Mine burned out in 2 weeks . I didn't run it all day it just fails.

Junk pump get a sand pump way better

@FixEverythingYourself

Жыл бұрын

Agreed, but if folks are on a budget, the pump will do its job for a while.

@Kguy2023

Жыл бұрын

Not for long.

You never showed us how to turn on filter or work the timer plug! 2 thumbs down for video

@FixEverythingYourself

Жыл бұрын

This is priceless! 😂

Does water get pumped into hole a and sucked out of hole b ?

@FixEverythingYourself

Жыл бұрын

Yes

@palomaquerida604

Жыл бұрын

@@FixEverythingYourself 😮i thought it was other way around? B & B sucks in the water, gets filtered in the pump and then spits it out into the pool thru A.

@FixEverythingYourself

Жыл бұрын

Correct, but from the vantage point of the pump, the first comment is correct (water goes from pump "into" A).

@palomaquerida604

Жыл бұрын

@@FixEverythingYourself my apologies. I do have comprehension skills, I promise 😂🙃😅

@FixEverythingYourself

Жыл бұрын

If you set up one of these pools and got it working, I know you've got some skills!👍😄