Please enjoy my video. Any questions please leave a comment and please subscribe. Check out all my DIY Videos. kzread.info/dash/bejne/eoB3z8x8mMrelbQ.html

Love your accent- has to be a New Yorker love it :) Laine.

@YourReviewChannel

2 ай бұрын

Yes! Thank you!

@sassenachsjourney2785

2 ай бұрын

@@YourReviewChannel thought so. I miss New York soooooo much :) I actually haven't seen any other NY people do DIY videos. Your video was really good and definitely has me feeling more confident than before watching it. Thank you, Laine.

@YourReviewChannel

2 ай бұрын

@@sassenachsjourney2785 You are welcome

Perfect timing...just moved into our home and looking to add some more security around the house and the patio door had me stumped. Now I know what I need..tks!!

@YourReviewChannel

2 жыл бұрын

Thank you for watching

Now this is funny!!! Pry the door as of that thing isn’t even there..LOL!!

Thanks for the posting!

Thank you for your help, can you also put another one up to double secure? Thanks Ahmed

The “whatsoever” man ! 😁

Nice job - Interesting that the directions show to REMOVE the (sliding) door prior to drilling the locking hole for the "pin". Andersen assumes most drill chuck's will be too clunky/large to get a perpendicular hole w/ the door in the way...

@YourReviewChannel

2 жыл бұрын

Thank you for watching my videos

When the lock was put in the hole was drilled in the wrong place. Can I expand the hole so the lock will fit or does the whole strip have to be replaced?

Hello, great video but I seem to run into 2 issues. Our patio door track has a big raised ridge that runs down the center of the track. And, there is already a screw where the unit is to mount to the end of the door. The patio door is likely from 1995. Are these issues deal breakers to use this foot lock or are there workarounds?

@YourReviewChannel

2 жыл бұрын

If you look at my video I also have a ridge in the center of the track, It should work? Just drill into the ridge nearest to you

Are the Anderson doors solid on the inside? Because the doorwall I have already has a hole down by the bottom and its hollow so I'm not sure how the screws would secure the lock

@YourReviewChannel

2 жыл бұрын

I am not sure it should be solid do you have to test it

Wont this interfere with adjustment of the height rollers?

@YourReviewChannel

4 ай бұрын

Not at all, it sits away from the door and adjust on its own not an issue

My patio sliding door has white hard plastic like material on the bottom with a metal rod down the middle, wondering if it would work on my door.

@YourReviewChannel

3 жыл бұрын

It should, is it an Anderson window?

Great video! I have a foot lock that wont catch, spring is still springy, has just stopped catching to lock. How can I fix it? Thanks!

@YourReviewChannel

2 жыл бұрын

Interesting. Did you try to push it really hard down with your foot? If that doesn’t work it’s probably the latch mechanism is defective

Do you have something for two slide doors that opens apart and the lock in the center,also for Windows. Thanks

@YourReviewChannel

2 жыл бұрын

I will look into that

I got my drill bit too stuck in my gun and it won’t come out😢

What size drill bit did you use, if you don’t mind me asking? Thanks for the info.

@YourReviewChannel

4 жыл бұрын

3/8'' Thank you for watching my video. and Please don't forget to subscribe.

@MrDurham1968

3 жыл бұрын

@@YourReviewChannel Why won't my lock slide down into the locked position? Tried WD-40 but it is locked in the "open" position.

@YourReviewChannel

3 жыл бұрын

@@MrDurham1968 make sure it is on the unlock position. then you should be able to lock it properly

@MrDurham1968

3 жыл бұрын

@@YourReviewChannel Thank you. Will do.

What size drill bit did you use. Thank you

@YourReviewChannel

3 жыл бұрын

3/8

Mine is a fiberglass or plastic sliding glass door. The screws aren’t exactly tight. What can I do or use to make them more secure?

@YourReviewChannel

5 ай бұрын

It’s fiberglass with wood underneath just tighten it up

@richsherie1843

5 ай бұрын

@@YourReviewChannel the door is fiberglass. Once I screwed the lock into the door the screws are loose - I can wiggle the lock.

@richsherie1843

5 ай бұрын

Correction, it’s a vinyl sliding glass door. The door frame is hallow, so the screws wiggle.

I put One on Top and, one on Bottom. Problem Solved..!!!!

Okay where do you go get that from cuz I need one for my patio door

@YourReviewChannel

2 жыл бұрын

There is a link in the discretion box below the video. If you can’t find it PLMK

Could this be used on top instead? Thanks

@YourReviewChannel

3 жыл бұрын

Yes definitely

Pilot bit sir. Pilot bit

How do you stop the non sliding door from being moved

@YourReviewChannel

9 ай бұрын

I don’t understand the question

but if you lift the door this not gonna hold it

@YourReviewChannel

3 жыл бұрын

Yes, they need to move the door out of the jam to remove the door. This stops that

can this be used on metal doors

@YourReviewChannel

2 жыл бұрын

Yes definitely

Most decent sliding doors today are made so that they cannot be lifted or pried-up out of their tracks.

@YourReviewChannel

2 жыл бұрын

Thanks for the information

You can still lift the door out.

@YourReviewChannel

2 жыл бұрын

No you can not

I’m falling asleep watching this video. He talks so much and repeats himself a lot.

DO NOT brush the shavings away with your finger…

@YourReviewChannel

2 жыл бұрын

Yes use a vacuum