Thank you for sharing this! You saved me some $$ to pay for handyman. I was able to fix ours by simple adjusting the pressure of my storm door that keep slamming so hard!

@TomLeeman

Жыл бұрын

Excellent!

Very good explanation, thank you!

@TomLeeman

Жыл бұрын

You are welcome enjoy your new screen door

I did the same thing with the door stopper. Lol. Great video.

@TomLeeman

2 жыл бұрын

Thanks good luck on your project and thanks for watching

Thank you! Super helpful

@TomLeeman

Жыл бұрын

Glad it was helpful! Good luck on your install. Thanks for watching.

Home Depot should used this video !!!

@TomLeeman

Жыл бұрын

Thanks for the compliment and thanks for watching

Hey good video despite this being 2 years already! Just a question to anyone who may help, how do you prevent the door from “bouncing”? Example is at 4:55

Thank you. Very handy info.

@TomLeeman

2 ай бұрын

Glad it was helpful!

Thank you so much 👍🏼

@TomLeeman

Жыл бұрын

You're welcome!

Good job man

@TomLeeman

2 жыл бұрын

Thanks and thanks for watching

Tom, I know it's been a year but this video is really helpful in using the right bracket. My closer did not come with two brackets. Do you remember the brand of the closer you used?

@TomLeeman

Жыл бұрын

I think it came with the door but I’m not sure it’s better on time but I think you can get that bracket at Home Depot. Good luck. Thanks

Great job, where did you get your bracket from I need on just like it, the one that came with closer is too large for the small area that I have to mount it.

@TomLeeman

2 жыл бұрын

It came with two brackets so you can choose and how you were going to hook it to the frame but the way we set it up we use the one in the video good luck and thanks for watching

Now what we've got to do is we've got to kind of extend it forward but we've got to put the front attachment on with the little pin that goes through it and that gravity holds it down, alright so now what we've got to do is we've got to pull that plunger out a little ways about an inch or two forward and then get our mark on the actual door where we are going to put our screw and that's where we are going to drill and put the screw but we have to extend it, we are going to pull it out there and then we are going to mark it, hold it, make sure it's centered (because you don't want it hitting the top of the door frame) and then get your mark on there and then make sure that you got it right where you want it and then we are going to let it slide out and then we are going to drill the hole and then we are going to screw it on there, all right so now once we've got that hooked down there I got to pull it forward so that HE can get the screw in the hole and then screw it on there so there's tension on it because we've pulled it about an inch forward so you can feel it it's nice and tight and then we can adjust it, we're going to show you how to do that later, all right so we've got the plunger or the closer on the top of the door on the door frame it's all set in both sides but as you can see it's closing very slow so what we've got to do is we've got to change the pressure or the torque on this and the way you do it is you stick your little screw driver in there and you're going to see there's a little thing at the front there you can use a phillips head or a flat head and you are going to turn it counter clockwise to increase the pull to make the door shut a little bit stronger or a little bit faster. Okay before you put your pins in you got to make sure that you've got your stopper on the right way, ours was backwards so we had to put some wrench on this, pull out the rod from the pneumatic cartridge and stretch it, pull that thing off, flip it around and then we had to put it back in and drop the pin back in so that we would have it in the right position so that we could have the door stopper hold the door open and I'm going to show you that in a second, so now that we got it on there you push it out, you push that up against the cylinder and that's what holds the door open when you want to keep the door open and so don't forget that, we've also got to put a couple of screws in the side of our attachment to the rod that comes out of the pneumatic pump so we had to go ahead and screw a couple holes in there and then we had to put the screws in on the top and on the bottom so that we would have a nice sturdy attachment to that pneumatic pump that pulls the door closed, we changed the tension by turning this screw inside of here clockwise or counter clockwise, counter clockwise to make it stronger, clockwise to make it loose, this here is what holds that door open so if I open it like this and I want to keep it open like that we take this and pull it here and then that holds the door open.

@TomLeeman

Жыл бұрын

Exactly

I’ve been trying to put one of these on my shed doors for the last two years trying every angle possible. But the doors are just like that, there is no true door jam. I’ve never seen that bracket before in my life and that’s exactly what I need and where did you get it? 😂

@TomLeeman

Жыл бұрын

I got it at Home Depot believe it or not and I think this all came with the door

I have a question. I had a security screen door put in but the issue is the door loves to swing out when it’s windy. Can you use something like this to catch the door? Right now if it swings open, it can hit the windows on the sides.

@TomLeeman

2 жыл бұрын

Yes this stops the door from slamming and from opening really hard it’s a good way to protect the door it also put a chain on it but I think this works better

Where did you get this product im trying to get one with the same fittings

@TomLeeman

Жыл бұрын

We bought everything at Home Depot

Pulled piston out 1" or so - for the pencil mark - installation of bracket on door. Why? Could you elaborate on why you needed to pull the piston out an inch or so?

@TomLeeman

Жыл бұрын

So it will pull the door back you need that squeeze

@chananon8120

Жыл бұрын

@@TomLeeman Thank you for your reply. Im going to decline on the 1" pull out of piston. This puts unnecessary tension on the spring and could also facilitate the infamous " slam shut " when closing. Thanks for your help video contribution.

Why at the top? Why not at the center or lower?

@TomLeeman

19 күн бұрын

I don’t know we just stuck it up top

How do you determine what size pneumatic you need?

@TomLeeman

Жыл бұрын

Most screen doors are standard unless you have like an extra large one but I think they’re pretty much the same and you can buy them at Home Depot

@YolandaTheGardener

Жыл бұрын

@@TomLeeman thanks. I've seen them but wasn't sure what size I need and the current one doesn't have the size on it.

Why does mine lock when the door is open all the way? Tia.

@TomLeeman

Жыл бұрын

There’s a little connector that’s on the shaft and if it’s forward and lock the door open so you may have to push the door a little bit to loosen it and then pull it back down the shaft. Good luck thanks for watching.

Everything about this video screams Florida haha

@TomLeeman

Жыл бұрын

You are correct, sir it’s Florida

Where can I get this closer and bracket?

@TomLeeman

Жыл бұрын

You can buy these at Home Depot, I think Walmart may have them or any hardware store. Good luck thanks for watching.

@andymckenna7524

Жыл бұрын

@@TomLeeman Thanks for your quick reply. Great vidio.

Will this work for a burglar bar type screen door

@TomLeeman

10 ай бұрын

I’m not sure I would have to see it

@DAT-TEXAS-DUDE

10 ай бұрын

@@TomLeeman It's basically a security screen door

Hi

Video sucks didn’t help need to know why won’t close all the way and adjustment

@TomLeeman

Жыл бұрын

Thanks for the kind words good luck on your install

@rogerbrandt6678

Жыл бұрын

@@TomLeemanwhat a miserable person, instead of asking, complain, would love to be his wife.