How To Install A New Exhaust On A 2024 Harley-Davidson Road Glide
The all-new 2024 Harley-Davidson Road Glide has proven to be a very impressive bike right off the showroom floor. If you've been following along with our vlogs, you know we've been putting our '24 standard to the test and have put it head-to-head with our Cammed 107" Standard and cammed 117" CVO. The one thing we knew was holding this machine back was the stock exhaust. Something about the quiet sound just didn't sit right with us. So we did the most logical thing and hit up our friends over at Bassani Xhaust to get this beaut kitted up with a fresh 2 into 1 system. The installation is very easy and can be done in under 2 hours! Follow along as we tear off that stock system and bolt on a proper one! Sound comparison included!
More pictures of the swap here: www.thrashinsu...
Check us out at www.thrashinsu...
Follow us on Instagram / thrashinsupply
#thrashinsupply #harleydavidson
Пікірлер: 240
Reminds me of that meme that says if you think your job is bad, just remember there’s someone out there that installs stock Harley exhausts😂
@THRASHIN
3 ай бұрын
Hahaha
Bassani? Respect and props for not just self-promoting self interests (Thrashin/Feuling) vlog. 👍
@THRASHIN
3 ай бұрын
We wouldn't be where we are today without Bassani! Gotta show some love and respect to them!
@scotty7663
3 ай бұрын
Bassani makes exhaust for Thrashin
@Sean-uc5vj
3 ай бұрын
Ahhh, thought it was Feuling. Must be via Bassani. Good to know !
It makes me happy, to see that you use other companies products as well as your own awesome job guys.
@THRASHIN
3 ай бұрын
Thanks!
I haven't watched any of your content up to this point. The way the heading was worded along with sound check advertisement got my attention. After viewing this segment, I gave it a thumbs up and hit subscribe. Your discipline in following professional processes along with stating the tools required to accomplish the work get an applause from me. Good camera and audio work too. For 11 years I have been a teacher of proper maintenance, service, and repair procedures, and processes. You guys are on the right track. Please don't change what you have going on. It'll grow as the word gets out. People are hungry for the truth and want to find someone they can trust. When you gain their trust because, of your successes they can literally see on your channel, you're winning.
@THRASHIN
3 ай бұрын
Thank you 🙏👊🏻
Just put the stainless Bassani road rage 3 on my ‘21 FXLRS and absolutely love it
@THRASHIN
3 ай бұрын
Stoked to hear it!
2 in 1 Bassani can't beat the sound👍
I just love the look of twin pipes. Plus my Tab 50 Cals sound awesome in my opinion.
That Bassini Pipe sounds Great....They make great quality pipes...I bought one for my old Victory Kingpin...It was the true dual Pro Street Turnout short pipe/muffler in one in Chrome....It would Roar when i would get on it....👍😎
Thrashin I admired your team work ethic 😊. The 2024 RG looks great with Chrome Bassani.
@THRASHIN
3 ай бұрын
Thanks a ton!
Hate the fact I found your channel!!! Just ordered 6.5 riser, floor boards, handlebar bags!!! Damn here I go in debt again!! The risers with the engraved flag as a Veteran it’s Bad ass!!! And Kelly in customer service is bad ass!!!
@THRASHIN
3 ай бұрын
Hahah sorry man! Stoked to have you repping out products though! Thanks for the love!
🤣 "this is the last time you will hear this bike with this exhaust"...immediately hear the exhaust as its being put on the lift lol...Another rad video dudes! LOVE IT!
@THRASHIN
3 ай бұрын
Hahaha
Looks dope sounds dope I have a Bassani exhaust on my LRS ..team Bassani 🤘🏽
Love your videos Lance, keep up the great work, love TRASHIN⚡⚡⚡⚡⚡⚡ - That VVT Trashin cover is SICK! 💥💥💥💥
Wow it looks incredibly complicated. You guys really know what you're doing and it's obvious that you love your work!
On KZread it still sounds sweet. I only can imagine being right there. Great install, especially naming everything you're going to use. Once again "THRASIN SUPPLY ROCKS"
@THRASHIN
3 ай бұрын
Thanks 👍 It sounds insane in person!
Local Dude here. I rode over to Ventura HD two weeks ago to pick up one of their last 2023 ST's ... and rode home on a 2024 Road Glide after throwing my leg over it. Bonus ~ it already had a T Bar setup with your bars on it! You bet I'll be following your progress. I'm looking forward to wrenching on mine and adding some more of your parts. Great work Guys!
@chrisresendez1018
3 ай бұрын
I’ve been looking at their three roadglide sts too. But my local Harley in Santa Maria has a 24 with tbars and crash bars. Might trade my SG in for that instead.
@THRASHIN
3 ай бұрын
Stoked! You're going to love it!
Watching pros work is cathartic and down right awesome ! Thanks, guys. Taco next time.
@THRASHIN
3 ай бұрын
Next time!
AWESOME ! the bike sound and look great !
Love the video but you should have shown how to remove the old exhaust gaskets , I was lucky to find a video on how to do it when i did my first one JS !
Chrome exhaust makes it freaking pop!!! Beautiful...👊
@THRASHIN
3 ай бұрын
Yes it does!
These guys are the new it on the bagger seen i look forward to these guys new products they have true passion u can see it nothing better than a room full of people who love what they love and all if them share the same feeling its so vlear the guy has a tc tat thats sick thrashin baby
Sounds way better..but she definitely needs a cam. Love the m8 but they need a cam to have that Harley sounds we all love.
Get that chrome Feuling BA Air Clener on that puppy
Great content guys especially the part about the retainer rings. You are the first I’ve seen to replace the rings. 👍🏾
@THRASHIN
3 ай бұрын
Glad you like them!
I like the new intro! I hate clips in the beginning of the episode as the intro. I always skip it. But this was perfect!
It sounds amazing! I’d like for Bassani to use your sound clips on their website instead of what they currently have.
Sounds badass, love my 2 into 1
Juan guiding you on to a bike lift is gold!
@robertvilliard3402
3 ай бұрын
That is Bitchin
Check with All American Cycle in Miami Florida. They may have tuned one or two.
Bassani ! POWER YOU CAN FEEL
Great video - Id also say its worth putting copper bolts on the exhaust studs rather than use the OEM ones, stops any problems at a later date when you want to take the pipe off again - esp handy if the exhaust covers some of the cam bolts / rear wheel bolt
Love the look and sound of a mid length especially the bassani road rage 3 mid lengths but on a bagger where it stops under the bag and if your wearing a full face it will echo the exhaust off the pavement and saddle bag right into your helmet lol and it gets rough after riding for a while lol
Great vlog, you three make a super team. I must have missed installing the exhaust pipe to cylinder head gasket, always a pia for me. I'm interested to see what's next. Ahh, but no tacos! Well, we can't have tacos every time. Is Campos still in Simi Valley? Liked their food THIRTY YEARS AGO,, HA HA. More for burritos then tacos there.
have this same exhaust on my '06 Street. My fav
Love it, that rear rotor must have had debri in the pad its got a nice groove already. Might want to clean the system
Loving ALL The Content!!! Wanna see SOMEBODY Do a Build or Anything Worth Wild with the Pan Am! I’ve seen you guys work on Just about Everything else OLD And NEW … Please Consider the Pan Am even though none of you guys actually Owns 1, that I Know of
@THRASHIN
3 ай бұрын
Cole just sold his 🤣
Good advice on the gaskets and retainer rings. Love your vlogs.
@THRASHIN
3 ай бұрын
Glad you enjoyed!
Damn black bikes usually aren't my first choice, but this thing is really looking clean!
@THRASHIN
3 ай бұрын
Agreed!
Donate to the me foundation lol. I need some thrashin parts on my 22 road glide Lance. Nice to see Cole with the crew. Was always my favorite supercross rider.
I want this exhaust. I wish you guys posted the link to it. I can’t seem to find this exact one anywhere
Great video and great exhaust choice. Can’t wait to see what’s next.
@THRASHIN
3 ай бұрын
Thanks!
Lance almost said see you, down the road at the end!
Great install video! Looks like the catalytic convertor was deleted? Does losing that back pressure affect it? Thanks! Regards, Lindsay
Nice vid. But. Gasp! No new exhaust gaskets??? 👀
Thanks for the video! Great job! Looks and sounds good!
Nice video keep up the good work Thrashin
@THRASHIN
3 ай бұрын
Thanks, will do!
Patiently waiting for Thrashin to make an exhaust for M8 touring 👀
@THRASHIN
2 ай бұрын
That would be cool!
Looks and sounds so much better!
@THRASHIN
3 ай бұрын
We agree!
Sounds great boys !!! 💪🍺🍺🍺🍺🍺🍺🍺😁 Now get ready for the NFL Draft !
Header tape looks good on them to I did my 2020 low rider s in header tape an it matches my stock wheels afyer heat cycle same header tape I used on my BBK headers on my coyote
Good job guys! I want to put a Bassani on my Dyna eventually.
@THRASHIN
3 ай бұрын
Do it!
@coreymiller2276
3 ай бұрын
@@THRASHIN I have got to put Legends in the front and back first!
Good look n pipe
Much much better !
You guys need to invest on vim tools ,the bit sets. Good for aftermarket part installs.
What Bassani Xhaust is that? Part number would greatly help. Keep it up your guys 🤘🏻🤘🏻
@THRASHIN
Ай бұрын
Not sure of the part number but Bassani Road Rage Mid Length in Chrome!
Sounds and looks a million times better. By the way , the channel cycle fanatics, said he's going to copy everything you have done to that bike on his same 2024 ride, even mentioned your name, make him pay for the parts 😂.
@THRASHIN
3 ай бұрын
Stoked! He's gonna love the set up!
Sounds amazing
Love 2 videos in one week 🤘🏻
@THRASHIN
3 ай бұрын
More to come!
Bassani is best. Dyno proven.
@eastcoastganjafarmers85
3 ай бұрын
They definitely sound amazing. Can almost tell it’s a bassani just from hearing it. I originally installed a mid length, but after dyno session decided to go full length. Ended up making more power with the full length. Loved the sound of the mid Bassain but ended up going with D&D Billet cat.
@tobpitbull
3 ай бұрын
@@eastcoastganjafarmers85 the full length makes best power.
Sounds great 👍
Keeping up with this, getting a ’24 soon and wanna do some similar things. I see a new cam cover peeking out at me. I’ve asked several dealers is that a new style cam position pickup, none seem to know.
Great video and well explained process!
@THRASHIN
3 ай бұрын
Glad you liked it!
Awesome, Can't wait!
Should have used a old Allen wrench and cut it down and use an ratcheting wrench on the other side for the bottom ghost pipe bracket
it sounded really good
Diggin the Scooby Doo get up 🤌🏻✊🏻
That bike sounds much better.
@THRASHIN
3 ай бұрын
Yeah it does!
Now you need a new mapping, at the latest with the new air filter. And I hope that no exhaust fumes get into the case. It would be stupid if your clothes smelled of exhaust fumes. But it looks very good!!!
@THRASHIN
3 ай бұрын
Yep! We got a ton more to do to this bike in the coming weeks!
O2 sensor black end goes to back.
What bag is that on the risers? I just installed that same bar set up and want a bag that fits between the tank and bars.
Keep it gangsta keep it chrome 😎
@THRASHIN
3 ай бұрын
you know it!
Looks and sounds great brah, but will you ride all the way to Sturgis with no earplugs and a ½ helmet? 🤔😆 shaka! 🤙
I didn’t see you replace the gaskets.
Is the engine management light staying on or can you clear the codes
Link for the exhaust??
Ok so onky three guys lmao i want to see a video of juan soing somthing bye his self then it be cool to see cole show us that hour 33 min bar install solo lmao love u guys man i never seen those boards i love them do u have in contrast cut if so i need a set
Bike is looking great. I have the Bassani mid super bike pipe on my 24 Road Glide. It sounds like it has a little deeper tone then yours. What's up with that timer cover? How come no shout out to Daryl Bassani who recently passed away? Great videos by the way.
@THRASHIN
3 ай бұрын
We paid our respect at the time of his passing! We wouldn't be where we are without him and that was a big motivator behind getting a Bassani exhaust on this bike ASAP!
Very nice!!
Isn't it so much easier using whole numbers, 15mm, 16mm instead of frations 27/32. Metric just makes sense
METRIC Systems ftw
The stock exhaust sounds like my stock 1977 FLH Shovelhead if I open up the throttle lol
@THRASHIN
3 ай бұрын
Hahaha
I'm wondering if the exhaust sits lower than stock, resulting in lower ground clearance and lean angle.
@THRASHIN
2 ай бұрын
It sits around the same height, maybe a little higher and has plenty of clearance!
no tune on this bike will be ok?
@THRASHIN
3 ай бұрын
We will eventually do a tune once more options are available! Running no tune will be fine for the time being and won't damage the bike at all!
@shenjiawu6722
3 ай бұрын
@@THRASHIN thank you so much for your answer. I am so confused. i’m gonna put my new exhaust on my 24 Cvo st . I just worry about will be make damage for my bike.
Yo Dogs. U need to design a pair of half moon boards and brake pedal for deluxe 2012. Aluminum type.
I'm still trying to figure out what one exactly fits the 24 street and road glides
I'm pretty sure you can use the screamin eagle tuner on those.
@THRASHIN
3 ай бұрын
Thanks for the tip! We'll check it out!
Would you guys know if my 2018 street glide bassani road rage will fit a 24 road glide? I’m assuming so since both m8, but just checking
what model pipe is that?
2:47 not sure if your saying it’s in SPORT mode
Poor Cole is never gonna hear those stock speakers now!.. lol Upgrade that two!…
@THRASHIN
3 ай бұрын
We're going to have to!
30:30 did the cameraman almost become roadkill??
I'm going to need you to start all over again. You forgot to weigh the after-market hanger bracket. It's probably about 8 pounds. 😂😂😂😂
@THRASHIN
3 ай бұрын
The bracket was with the new exhaust on the scale!
Can you guys give us feedback on if the pipe is getting the bag hot? Being soooo short I didn’t know if it gets hot under there, even with the kick out. Thanks 0:07
@THRASHIN
3 ай бұрын
We haven't noticed anything yet! The kick out does a good job at keeping the exhaust moving away from the bag!
Ooh I spy a thrashin cover for the vvt
@THRASHIN
3 ай бұрын
Shhhh...
We need a cartoon face shirt with the name SWIVELHEAD...😮
Let’s Goooo! 🌮🌮🌮🌮🌮
What size riser and which bend bars are on that bike?
@THRASHIN
2 ай бұрын
9.5 Pull Back Riser and we have the FLH Mid Bend Bars on it!
Are the baffles removable?
Buy the long neck Milwaukee electric ratchet for removal.
So have you guys overcome the no start issues I saw lance had it on that demo bike
@THRASHIN
3 ай бұрын
We have never had that issue on our bike!