After searching high and low for some info on installing a security light/camera under a soffit, I finally came to yours. Thanks for showing the correct way to do this. So many others clearly have no clue regarding electrical code and the use of junction boxes. (Yes, I found several videos where they just mounted directly to the siding with not junction box and the wire nuts just "floating" above the vinyl)

Thanks for the video , that’s my next home project

@getitdonehomerepair

Ай бұрын

Hope you enjoy it!

Wow! Only video I found on how to start from scratch and you did this with so much ease and such great explanation!. We have an electrician coming to replace our traditional flood light with Ring Pro, but that spot is right next to the porch door, and not too high above ground. I thought intruders might just take out or destroy camera if within reach 😅. Therefore I was wondering if we could ask the electrician to create an outlet higher up, we have metal siding, but many won't even tell you the charge until they come to your place. Still debating coz am sure the price would be three times more than $195 (current price) 😅🤑🥵.

This tutorial is great, thanks!

@getitdonehomerepair

Ай бұрын

You're welcome!

Such a amazing and professional job!! Very informative as well!.

Great Job With The Installation Jim 5 Stars * * * * *

@getitdonehomerepair

3 жыл бұрын

Thank you. I hope you learner something from the video.

Really enjoyed the tutorial on installing light under soffit. Could you explain how you found your power in the attic? And how did you know which breaker to throw to avoid shock while tying into the junction box. Thanks

Great tutorial. Exactly what I was looking for. Thanks!

@getitdonehomerepair

Жыл бұрын

Glad it was helpful!

Teddy. From Bob’s Burgers. Great video. Thank you.

I have Motion Activated Security Light in my balcony and that one got a swtch to turn it off or on and the light installed on junction box . if i get power from the same junction box that the 1st light is installed on another junction box for the new Motion Activated Security Light which is gona be 6 meter away Do i still need another switch to control the second one or only the one that is already there is good for both

Thanks for sharing. Very professional

@getitdonehomerepair

2 жыл бұрын

You are very welcome

Thanks for the video! I drilled a hole but there’s no nearby studs or wood above so I’m not sure how to mount the electrical box 😬

@getitdonehomerepair

Жыл бұрын

Is there any wood under the soffit? If there is no wood then you will need to install a piece of wood between the roof rafters so you can screw in the electric box.

Great video! Do you have one for soffit lighting?

Can you just join 2 wires using tape? Are you not supposed to use a junction box to join two wires?

@getitdonehomerepair

25 күн бұрын

No tape us wire nuts

Hello, what size hole saw was used?

@getitdonehomerepair

Жыл бұрын

Sorry I think it was a 3 inch

What is the tool you used to notch the holes?

@2NiceWitIt

2 жыл бұрын

It's called a unibit.

I liked the detailed video on installing a motion sensor light under the soffit. Can you please identify the brand and model of light used? Everything I look at doesn’t look as good as that one. Thank you!

@getitdonehomerepair

11 ай бұрын

Check out this video for another light that I have personally used and like.The other company stopped make the light in the first video. kzread.info/dash/bejne/i6aIqNexpai4aaw.html Feit Electric Floodlight Camera. amzn.to/3J9Bdow

@jamesgarrett9367

8 ай бұрын

​@@getitdonehomerepairn

HATE that fiberglass insulation. We have got to come up with a better way to insulate!

@getitdonehomerepair

2 жыл бұрын

Thanks for watching

@SkiloDog2000

Жыл бұрын

Cellulose insulation is shredded newspaper treated with boric acid to be fire retarded and pest resistant. It’s commonly blown in and can provide air sealing qualities when installed in an enclosed cavity and dense packed. Used a ton in retrofit for its low cost and ease of installation.

What kind of wire did you use?

@getitdonehomerepair

2 жыл бұрын

The wire I used was Romex 14/2

0:54

Hi Dear, Your video is good. I want to send some products to you. Are you interesting?

@getitdonehomerepair

3 жыл бұрын

Thanks for watching.

@amykhiry873

3 жыл бұрын

@@getitdonehomerepair Would you mind let me know your email? I would like to send you some picture of my products.

@getitdonehomerepair

3 жыл бұрын

@@amykhiry873 Sure getitdonehomerepair1@gmail.com