How To Install A Heavy Duty Cradle Mount/Frame Adapter | KLX110
Автокөліктер мен көлік құралдары
If you don’t want to rip your footpegs out of the bottom of your KLX motor the next time you send it over a jump, WATCH THIS VIDEO! This is, hands down, the most important modification you can make to your KLX. Seriously, DO THIS!
★SPONSORS and FRIENDS
Special Thanks to: www.TBoltUSA.com
★TIMESTAMPS
0:00 Intro
★AFFILIATE LINKS (I MAY MAKE A COMMISSION FROM SALES GENERATED VIA THESE LINKS)
Products Used:
Anti Seize: amzn.to/3A1MNPO
Blue LocTite: amzn.to/3QLGaHf
Blue LocTite (Small): amzn.to/3xROXPn
Torque Wrench (Low Torque): amzn.to/38onM2V
Torque Wrench (Best Value): amzn.to/3rIVvvD
Multi Purpose Masking Tape (3M-The Best): amzn.to/3v32Wjf
Disposable Shop Towels: amzn.to/3bw3NRS
Hook and Pick Set (Best $10 I Ever Spent): amzn.to/3rJ50Lj
Mini Flashlight: amzn.to/30rwYip
Video Production Tools:
Camera - Canon M50: amzn.to/3qupANX
Camera - GoPro Hero 9: amzn.to/2O96Lmq
Softbox Light: amzn.to/3epcwHk
Neewer LED Lighting: amzn.to/3t23Sm3
Microphone: amzn.to/3ckzRr3
Sound Recorder: amzn.to/3etXFLP
Camera Tripod - Low Height: amzn.to/3rA9zqU
Camera AC Power Adapter: amzn.to/2PCLEsP
★NON-AFFILIATE LINKS (I DO NOT MAKE A COMMISSION FROM SALES GENERATED VIA THESE LINKS)
Products Used:
TRC Heavy Duty Cradle/Mount/Frame Adapter: tboltusa.com/store/trc-cradle...
Kinetic MX Skid Plate (Silver): tboltusa.com/store/kinetic-mx...
★USEFUL LINKS
Thread Lockers: www.machinebuilding.net/expla...
★MUSIC CREDITS
------------------------------
Music without copyright - Attribution not required.
You're free to use this song and monetize your video.
Artist: Matt Harris | Track: Grease Gun
------------------------------
Artist: Silent Partner - goo.gl/4Anr1p
Genre: Hip Hop & Rap - goo.gl/q340To
Mood: Funky - goo.gl/FygNgJ
------------------------------
Track: Free Fall - Vendredi [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Free Fall - Vendredi |...
Free Download / Stream: alplus.io/free-fall
------------------------------
Alaska Sky • Patrick Patrikios
Alaska Sky
℗ KZread Audio Library
Released on: 2019-10-25
Пікірлер: 21
thanks for sharing there is always something new in your videos greetings from Mexico 👍🏼👍🏼👍🏼🇲🇽
@brian.d.mobley
2 жыл бұрын
Hola Jesús!!! Thanks for the nice comment! Thanks for watching also! Viva México!!
I have a gap between the frame and the 2 monster bolts in the rear, I’m wondering why it isn’t flush my buddy just installed his right next to me and it fir flush his is a 22’ 110l and mine is a 21’ 110r
@brian.d.mobley
Жыл бұрын
HI Zack. Its hard to say without seeing the configuration up close. But, Im sure you can figure it out!
@aaroncrain2343
3 ай бұрын
Mine is the same way…
4:25 need to tighten up that drain bolt man lol
@brian.d.mobley
2 жыл бұрын
Thats funny. I didn’t even notice that. But, since you have such a good eye, you may have noticed that the entire clutch side of the motor is off in this video so its every empty of oil. Maybe some just seeped down to that drain bolt! Thanks for watching! Take it easy!
will this work on a ttr110
@brian.d.mobley
2 ай бұрын
Hi Max. Talk to the folks at TBOLTUSA. They know all about the various fitment permutations. Thanks for watching.
Do you know if they have something similar for the piranha 140 on a ct70?
@brian.d.mobley
2 жыл бұрын
Hey Small Bore & Two Wheels! I don’t know, but I’m inclined to think not. The engine on a CT mounts in the unibody chassis on the sides of the cases as opposed to the sides and the rear when using a cradle like the one in the video. Its basically hollow inside the CT chassis and there is no provision inside the unibody for any mount support from the rear of the engine to the unibody like you would have on a pit bike frame.
@Smallbore2wheels
2 жыл бұрын
@@brian.d.mobley thanks for the fast reply
Will this work with the BBR foot peg mount?
@brian.d.mobley
2 жыл бұрын
Hey! It will work with some aftermarket footpeg mounts, but you’re best bet is to contact TBOLTUSA about fitment of any specific brand. Thanks for watching!
At 6:17 you show the mount order as (this is the order the bolts will go thru from outside) : Cradle, Skid plate, foot-peg mount, then into the engine. The foot-peg mount is directly against the engine case. At 6:23, you now show the order as: Cradle, foot-peg mount, skid plate, then into the engine. In other words, at 6:23 the foot-peg mount has the skid plate sandwiched between it and the engine case. So which way is it??
@brian.d.mobley
Жыл бұрын
HI Jeff: The correct order is stated beginning at 6:01. Hope that helps. Thanks for watching.
👍♥️🥰🥰👍👍
@brian.d.mobley
Жыл бұрын
Thanks
Do you know if they have something similar for the piranha 140 on a ct70?
@brian.d.mobley
Жыл бұрын
Sorry. I didnt see this until today. The guys at TBoltUSA can help you with that question. Ask for Vince Pale Sr. He can answer your question.
@Smallbore2wheels
Жыл бұрын
@@brian.d.mobley no worries. Thank you