Thannnk you so much for this video...Now I know where to find these older brackets for my broken kitchen Draws...Amazing!!!!

I wish i saw this before i went thru the trouble i did, thanks for the video.

Exactly what i looking for...thank you. Will repair my makeup drawer.

@SWISCO

4 жыл бұрын

That's great! Let us know how the project goes!

I would like to know how to remove these and put in the side type.

Just what I needed Thanks

@SWISCO

3 жыл бұрын

No problem! We're happy we could help.

I like this item my issues is the draw bottom droops down and bottom was gauged up by the bar. is there a model with an additional glide option to prevent the draw from scraping?

I need the other peice that goes on the drawer itself. It's metal. And the slide is wooden. It's a vintage dresser I guess. Anyone know what that peice is called? 😢so confusing 😂

Your video is very useful, thank you! I have a question and would like to have some of your advice. Our old kits fall out before we started to fix, so we can not mark the measurement on it. Would you please give us some advice on that?

@SWISCO

4 жыл бұрын

Great to hear the video helped! If the old track is no longer installed, would you be able to measure based on the old installation holes?

@lingling04050909

4 жыл бұрын

@@SWISCO Thanks for replying to me. Unfortunately, the craftsmen who did the frame did not install the kits perfect so the holes are not really in the center of the kit. It's okay, we will keep trying to find a better way. thank you!

@SWISCO

4 жыл бұрын

@@lingling04050909 Ah, darn! If you can send some photos of the set-up over to our experts, we may be able to help a bit more - www.swisco.com/page-id-part

Unfortunately, when my drawer closes, it comes face to face with the back, there is no space for the plastic base to fit and the drawer don't close firmly. Nice equipment!

Hi, there is a part that I didn't actually understood. How do you mount the corner glides? Do you simply glue them to the face frame?

@SWISCO

3 жыл бұрын

The corner guides can be attached with wire nails or staples.

The drawer goes along the track and then drops down. What are the little plastic l_ shape pieces used for? The other drawers work fine but I don't see why they stay on track. You're my only help! Please!

@SWISCO

7 жыл бұрын

It's hard to say what might be causing your problem without seeing the drawers. Take a look at our Part Identifier and consider sending some photos in for our experts to look at: www.swisco.com/page-id-part

@eliteemerz

6 жыл бұрын

The L pieces are for the front edges of the drawer on each side (you mount them on the dresser) so that the drawer can slide on something that isn't wood to wood

What's the average it can extend out given the size of the bracket

@SWISCO

3 жыл бұрын

This track extends 22-3/4", but can be cut down if needed.

can you buy these at Lowes or home depot

@SWISCO

4 жыл бұрын

You can get them on our site! www.swisco.com/Drawer-Track-Kit/pd/Other-Drawer_Cabinet-Replacement-Hardware/32-053

This is close to what I'm looking. My guide is up at the top. It's not at the bottom. The wife somehow knocked the long metal rail out. I can't it back it.

@SWISCO

3 жыл бұрын

Try checking with our experts at swisco.com. Click on part identifier and upload photos of your specific drawer parts.

Stodoys is nice for that.