Hi, these look like the same tracks we have up. How do I remove them? I've been able to remove 1 side only by unscrewing a screwing but the other side is near the wall and I can't get a screwdriver in.

Just got all stuff from Spotlight. Your video gave the confidence to do it myself and save a few dollars. Thanks.

Very informative! Thanks!

I've just bought the Boston heavy-duty track. Which seems to be what is on the video. But the end of the track doesn't look the same. There's no facia covering the end of my track where the rail drops into the support bracket. Does anyone know if they've changed the design? Cant return what I have without knowing if it's missing some pieces or it's a redesign. And the shop probably won't know. Thanks

Thank you for your explanation 😊

Can I do this on sharp corners?

I'd also mention that it is better to pre-drill the screw holes when going into the architrave to avoid splitting.

The center support bracket disappeared shortly after installation

What if your ceiling is not parallel to the top of the sliding glass door? Do you mount the curtains parallel to the ceiling, or to the top of the door? The door is level, but the ceiling rises about 1.5" across the width of the door--just enough to be noticeable. :-( Also, I wish you'd shown more details with hanging the curtain. How high should the pins be installed in the fabric?

Very good video I did not get wall brackets with the fitting. Should I have to buy separately?

@eevleenjajou5713

4 жыл бұрын

Come with it

What about the middle hold Dosen't show us

My dumb kitten destroyed my landlords curtains! I have no idea how to remove them and put new ones up! Help!

too low should have been measured from top of the wood, it will reduce light bleed. Also should be at least 4 brackets to ensure adequate weight distribution

@laurabrown1456

3 жыл бұрын

One of the Best Ideas of Noise Free Room is "SoundProof Curtains" That Stops Outside Noise by 80% (25 Db) Tested. Check Here: livesoundproof.com/best-soundproof-curtains/

Doesn’t say how to loop the chord through the master slide or adjust the chord to the right length.

@mtccurtainsblinds6189

5 жыл бұрын

exactly

The girl has completely missed the fact that the timber above the window frame is there as a pattress, specifically for mounting the curtain rail, ie, a flat straight surface which is easy to screw into and spreads the load out the curtains. it also extends beyond the sides of the window, to allow the curtains to hang clear of the window when opened. Likewise she has fitted the end brackets too low so the centre bracket cannot be used. All in all, completely ignore everything she says!

@EEsYouTubeChanel

3 ай бұрын

I’m just trying to replace the front facing curtains on the track and KZread won’t take me anywhere better than this. My kitten is stupid and destroyed them! Help!

Very well ✔ 👍 👌

Thanks

Yeh Sab Lagane ke liye ekdum easy hai

You are beautiful ❤️

Everything is made from a mile distance away... Can't see a damn thing of what the girl is actually doing...

Hot chicken

Followed steps only to realize she never allowed or took into consideration vertical or Venetian blinds that usually sit behind curtains. Thanks not as now I have to shift all the brackets scrwed into the timber. Not impressed.