Great video for learning 👍

Thank you for information,very helpful

As new in plumbing field I do appreciate for your informative vid mate well explained and well done 👍🏼🙂♥️

@loving-plumbing

Жыл бұрын

Thank you very much. I'm glad they are helping .

Excellent video mate.

@loving-plumbing

Жыл бұрын

Thank you very much

Well done my friend, you tried your best to explain which is very helpful for new bees like me, please keep on making good quality videos like this, really appreciate for your help, thank you.

@loving-plumbing

2 жыл бұрын

Thank you very much. Appreciate the feedback. I'm glad it is helpful . Cheers

Quality boiler that 8000 👍

@paulwilliams5296

10 ай бұрын

Yeah it will probably have half the Life of the Potterton Neta heat had

Thanks this is a really nicely done video. Small question is it better to do the flush or power flush before installing the new boiler or after. Just wondering if it is done before (using the old boiler to heat it up), the sediments in the pipes and radiators won’t go through the new boiler

Great informative video. Having my two bedroom flat system boiler changed to a combi by the housing association and wanted to get an idea of what will happen on the day. Also what to look out for so no corners are cut. Thanks!

@loving-plumbing

Жыл бұрын

Thank you

@Shah2

Жыл бұрын

@@loving-plumbing corners were cut! There were two bottles in the new boiler box. Cleaner and inhibitor Fernox red and blue cap. They were not used. Can they flush the boiler without using them...the rads were drained of water via a hose stuck on water pipe in hallway...I was keeping an eye on the bottles (not watching them constantly, as I don't like that personally in my job) but at the end before they left I felt the bottles and felt they were full , caps still sealed. I think coz of the time needed to flush/clean they didn't do it. The guy working on the boiler did use a spray bottle which I found out is an inhibitor, but boiler was not run for hour whatsoever, maybe just 20mins tops. They felt the rads warm up and bleeded them that's it. You mentioned it was imperative to do it in your vid. I didn't like the fact they didn't do it. I didn't call them out straight away as again I didn't want to tell them how to do their job. So I waited for the inspection next day to mention to the inspector. I told them that the workers didn't use the bottles, they agreed that it should have been done. The paperwork was even filled in ticking the boxes stating that they had used the cleaner and inhibitor. Also they were cheeky enough to stick the stickers from the bottle onto the side of the boiler but without inputting the date used. Why would they do that? Purely to save time? So the boiler breaks down so they are called out more often? I am a housing association tenant. Or is it not imperative? Anyway, the inspector arranged for an operative to attend the next day, I wasn't in but my misus stated all they did was come in and pour a bottle of inhibitor into the Fernox TF1 Sigma Filter. That was it. No cleaner used, no running on full power for 1/2 hour etc. Boiler working fine. But I'm guessing old sludge remains inside rads/pipes. Its probably just going to damage boiler sooner rather than later. Any thoughts?

@lewisconway6431

2 күн бұрын

Why do you care? It's not your boiler,you didn't pay for it did you?

Great vid. Obviously British Gas looked after the boiler and system. Hmmm, I wonder how much they quoted compared to yours. I'm guessing 5-6k!! Robbing b&stards.

Hey great video ! I’ve got a question for you … I have a small house that is having its plumbing converted to a combi system and I was wondering would it need motorised valves ?

@loving-plumbing

Жыл бұрын

Only if you are having more then one heating zone. But usually probably not if converting.

Can this 35KW sufficiently provide hot water for shower if two people using at the same time? 🤔 or would they need to take turns thanks ?

Nice work. Another channel to keep uo with. What's the brand of pressfit fitting do you use? You mentioned on one of your videos it does both gas and water and cheaper...

@loving-plumbing

2 жыл бұрын

Thank you 👍. I'm pretty sure they are just called Aquagas M-Press fittings. Merchants like Williams have recently started to stock them. Cheers.

great vid, if you were called to install a boiler but the customer was not willing to agree to power flush the system before hand , would you agree to the install ? even tho by default this would make the warranty invalid (I assume) and would you make note of this on the commisioning documents

@loving-plumbing

2 ай бұрын

Power flush is not mandatory. A chemical flush is.

Great video looking at a combo conversion can this system be run with micro bore pipework as my radiators are all micro bore ?

@loving-plumbing

Жыл бұрын

I wouldn't recommend it to be honest. Unless the micro bore is already pressurised

@laganas2008

Жыл бұрын

@@loving-plumbing How can you tell if the microbore is pressurized? I'm in the same boat as the person who asked the question. I have a regular (very very old) boiler with microbore and I don't know what to do for the best. Thanks.

@SamsungJ-wy4iq

8 ай бұрын

​@@laganas2008I'm in the sanw boat, did we get an answer to this please 🙏

Say you have a bath that only gets used twice a year, isn't that effectively a dead leg?

look at all that scrap😃

How can i found out the flow rate my house has, also is there a way this flow rate to the property can be increased by the supplier?

@loving-plumbing

Жыл бұрын

Hi. The best way is to get a large measuring jug and run the tap for a minute. This will tell you how many liters per minute you have. Make sure it's from the cold main. I like to use a big tilers bucket. Alternatively you can buy a weir gauge which is a plumbers measuring device. Flow rate generally can't be increased by the supplier but you can upgrade your incoming main size. The minimum you want is a 25mm blue MDPE pipe. Otherwise pumps and accumulation may be necessary

The Hive can’t modulate the boiler making the boiler not as efficient as it could be.

@j.j8114

Жыл бұрын

Correctly sized rads with traditional trv’s. Condensing boiler. Normal programmer and room stat. Basic stuff is the best. Why complicate things.

@Mhyykol

Жыл бұрын

@@j.j8114 because on/off controls are inefficent

Nice video, I'm due to have a worcester external boiler fitted very soon My water is also 5bar 25ltr pm, what should my prv be set at taking into account the shower being fitted is a mira maxim dual Digital overhead one.

@loving-plumbing

Жыл бұрын

3 Bar is pretty standard I would say. Thanks 👍🏻

Worchester bosch don’t touch them better boilers out there