Sorry but the blue wire is the remote turn on it should be attached behind the radio there will be a corresponding wire especially that you have an aftermarket head unit , it is very important because when you turn your radio off your sub will still be on if you have the key on and when you driving with the radio off you might get road noise , otherwise good video 👍

@RCS_716

9 ай бұрын

Thanks I appreciate the comment, this will come in handy for anyone scrolling through the comments 🙏

@WalshyCSGO

5 ай бұрын

I personally never drive with the radio off so that wouldnt be a bad thing for me to just connected the remote wire to ignition power source?

@johntrataris8731

5 ай бұрын

@@WalshyCSGO to each their own I just said that because it's the rite way of doing it end of the day everyone can do what they want in their own cars

@IOAN2ER

4 ай бұрын

Yoo, nice tip. I was thinking" man i don't like that i have to tap into the other wires" 😅

@UmitMaraslioglu

4 ай бұрын

Yes, the light is on. It means there is no problem with the connection, right? However, I never turned the controls on or off. I'll try this and let you know if it responds.

Small but mighty!!!! "Alright"

Very good video bredrin. Nice install. Looking to get one for my Honda crv this month.

@RCS_716

Жыл бұрын

Thanks 👊

Hi mate what head unit is that? Looks mega compared to standard one I want one for my 6r😅

@RCS_716

Жыл бұрын

It's from a company called EONON if you type this into ebay you'll see some " For VW Passat Golf V VI Caddy RCD330 Android 10 Sat Nav Car Stereo 9" 8-Core 3GB " they come with wireless and wired apple car play and android auto built in.

what made you go with this sub? I've got a small yaris, so this would most probably be perfect

@RCS_716

Жыл бұрын

I've got a small car so I didn't want something too big, I also wanted an active sub so that everything is in the one box so it looks neat and clean and I also wanted to be able to take it out easily if I needed more space in the boot the carry something. So I watched a few videos about it and felt like it would be perfect for me and it didn't seem too hard to install so I went with it and I'm still loving it.

What infotainment system you got?

@RCS_716

2 жыл бұрын

I've got the Eonon Q53Pro I'll have an install video up soon on it, just need to edit the video.

Hi are you using the OEM speakers with the sub or have you upgraded speakers?

@RCS_716

2 ай бұрын

Still the OEM speakers

Remoute cabel 😂 This is control from the radio so that the subwoofer only works when the radio is on. Or you can jumper from "+" to the remoute, and it will be as you did. Only the battery will discharge.

@RCS_716

Жыл бұрын

Ngl I'm not sure what part your talking about. Could you add a timestamp pls

@oleksandr8937

Жыл бұрын

11min.

Hi. Nice video. I dont have rca in my radio and I think I make mistake. I connect signal to front speaker but sub not work is no sound 😔 maybe you can help. And how many volts must be in this ignition blue cable?

@RCS_716

9 ай бұрын

There is an rca cable included with the subwoofer. ( it has rca on one side and the other side is stripped ) You have to splice the stripped end into your rear speakers and then you can plug the other end with the male rca cables into the subwoofer. You need 12v for the blue cable, you can either tap the blue cable into your fuse box or you can splice the blue cable into another wire that already has a 12v ( make sure its a wire that gets power only when you turn on your ignition ) And double check that you have a good grounds connection.

@przemokbh8079

9 ай бұрын

@@RCS_716 thanks so much boss

@RCS_716

9 ай бұрын

No worries 😁

@przemokbh8079

9 ай бұрын

@@RCS_716 I have buy today fuse adapter and think to stolen some 12v from fuse box from fx cigarette lighter. It's OK?

@RCS_716

9 ай бұрын

Yes, you can fuse tap the cigarette lighter fuse and it will work 👍

Hello. I had the same product installed on my vehicle yesterday. However, it is so ineffective that the blowers barely move at all. It's like there is no sub. What would be the reason? By the way the sub is working. Don't think it doesn't work at all. But vaguely. And no 12v power was entered into the system. I watched.

@RCS_716

4 ай бұрын

You'll definitely need it to be connected to a 12v power source for it to work correctly. Also it's a very small sub so it's not going to be super loud and booming. But that being said it should still be noticeable. When you turn the sub on and off with the remote do you hear any difference in the bass ?

@UmitMaraslioglu

4 ай бұрын

@@RCS_716 Thanks for responding. Yes, I don't have high expectations. However, in your video the bellows are visibly moving. When I hold it, I get vibration, but it's as loud as a simple speaker. It's like it doesn't have any bass power. The lights of the controls are on, but the person who made the connection set both buttons to maximum and said that this is the maximum power it gives. I never touched the controls. Would you like me to try?

@RCS_716

4 ай бұрын

Yes, if its the same remote as mine then set the gain to "max" and set the LP filter to "50hz" and put the phase switch to "norm" What I'll do is I'll make a shorts video at some point tomorrow and I'll show how much my sub is moving while playing a certain song, then you can play the same song on yours and see if yours moves as much as mine is moving That way we'll know if something is wrong

@UmitMaraslioglu

4 ай бұрын

@@RCS_716 Thanks a lot. I will be waiting. In the meantime, I will test the remote control.

@RCS_716

4 ай бұрын

Also, try switching between min and max gain on the remote to see if there is a noticeable difference between the two of them because min gain essentially turns off the sub