Probably one of the better installation videos out there, great job man!

I literally just installed a 6 point harness after looking everywhere for instruction and then BOOM!.....thanks mate, just confirmed my install is good. Good to note that if you have retained the sliding seat rail, best to make the angle calculations where you will be sitting in the slide position because as the seat slides back and forwards, the angles will change.

@OffBeatGarage

6 жыл бұрын

No problem my man!

surprised u didn't get purple lol

I have that same harness , IV had mine for 2 years and in glad Iv gone with it an i love that they recheck the harness , awesome service and there just some awesome guys to talk too. They walked me thrown how to set it up as well as making sure it was in right once I got it in my car

@OffBeatGarage

6 жыл бұрын

Gotta love them! Awesome company for sure :)

i think i stand with all the ogs rc devil that we are happy your back!!!!

Definitely the information and explanation I was looking for, I had to go through many others that were little to no help. Thank you!

Now that's a great install vid mate, you nailed everything, spot on.

Really appreciate the videos!!! Keep up the great work!!!

Awesome video as usual, very informative

Ironically was just searching on how to do this... now I won't kill myself when I roll!

fire af.... I feel that your level of professionalism in the car build is high.... just because u used primer 🤯

Was watching your old video! now this popped up lol

Nice, I'd never heard of Crow before this video, but I've been checking them out. I actually love that they have purple. The only other place offering purple that I know of is Pit Road M in Japan, and that is a limited color that might not be around long. Their gloves and shoes look decently priced, also. Thanks for sharing the info!

@Dudeford

6 жыл бұрын

eXite Video Magazine Cipher Auto also offers purple SFI harnesses at 150$ a piece.

@eXiteVideoMagazine

6 жыл бұрын

Brad Stepien thanks for the tip! I'll check them out as well!

This was awesome

7:10 soooooooooo genius

You should get a HANS device

Thank you this is all I need for the cam lock area to how to adjust so it is not in your crock area, it should be on your lap area? I wish there was a closer camera look at how to do that area?

Almost thought you had the engine running at the end there, very realistic sounds 😂

Hey nice video even though I haven't watched it yet lol

are your lap belts still in there using the eyebolts and washers through the floor? No problems teching that?

also to point out for 6 points sparco and schroth make there 6 point belts separate. speaking of harness belts how would I go about mounting if it's just a autocross/pdx / daily driver setup. do I do the same. people have told me I could mount the sub straps to the back part of my seat mounts. and then for the lap belt one to the oem mounting point in the b- pillar then the other to the seat mount side tab does that work, or do I still need to do it like you did.

Are you going to get a different seat? I'm not 100% sure but I thought I read about something with pro am and/or fd requiring a seat with the head and neck support, I'm not sure of the proper term for the head and neck support but you get the point haha

would it not be better for the bolts holding the harness to the floor to face up with the nuts inside the car ? That way if the car bottoms out after leaving the track the bolts wouldn't be sheared off at the floor releasing the harness. Or possibly getting hung up on something like a track barrier and pulling the harness down against the driver.

Should you go with bolt in, or wrap around

Racequip offers purple

I love the vids...its a shame u don't like Makeing em..but keep it up

When someone comments "Chris Fix Already did this" ChRIs fIx AlrEAdY diD ThiS (insert Sponge Bob chicken meme)

Make a video about your switch panel :)

I’m new to this, why would you have to recertify?

I love you

Can you do a review of Nikitas car I really want to see his VERT 😭🙏🏼

getting close to 100k...

i hear alot of ppl said Racing harness could easily stretched so its not save

i cringe every time i see that intro

What shifter is that

@NOSKIDPLATE

6 жыл бұрын

Sirch idk but the shift knob is custom I'm sure of

👍👍👍👍👍

What is the part number for the eyelit hardware used in this video?

Would you reccomend a harness bar if a full cage isnt in budget?

@louiscrespo1280

6 жыл бұрын

o Lemurs not really if you don't have a full cage then a harness bar can be dangerous or that's what the internet says

@OffBeatGarage

6 жыл бұрын

If it's a properly made harness bar then i don't see an issue with it. But the majority of harness bars that I see are really flimsy and don't tie into enough points in the car to be strong enough. So in that case I would say the stock seat belt would be safer. Hope that helps,

@harryazzole7814

6 жыл бұрын

o Lemurs if you really want a harness, at the very least take out the back seat. And get a Takata Drift belt. They're the only ones that are DOT legal (other than Schroth which is Takatas parent company) and that's for a reason. If it's a street car, stick with a Takata Drift 3 for more lateral support and use the rear seat anchor points.

cut out the cat floor pan bulge to get the seat even lower

Braum has purple

What seat is that?

@OffBeatGarage

6 жыл бұрын

+Linkcms2town Sonic Motors VS3

@Linkcms2town

6 жыл бұрын

R they certified?

@OffBeatGarage

6 жыл бұрын

Nope

Dat outro tho…

Bruh u even jdm? No takatas ;) But in all seriousness, I love your videos :D

@impulse9091

6 жыл бұрын

after the shit they running into with airbags hahhahhah

@AX-xi2pw

6 жыл бұрын

Yea RIP :/

You are really good at buying good belts but why not with a really good chair? The belts make no use unless you have a proper chair

@OffBeatGarage

6 жыл бұрын

Temporary seat that's why.

666 likes 👀

Im early

Erster