How to install 360 degree cameras in car? Long video from carsanbo
The car: LEXUS 2015 ES200
360 degree camera supplier: Guangzhou carsanbo technology limited
Installation spend time:About 3 hours
Installation cost in China :99USD
The screen use: OEM factory radio screen
Interface for LEXUS :Yes,Sample car using CVBS channel .New version support VGA channel
Tools need prepare:
1. Plastic skid tools, wrenches, scissors, etc
2. Automobile electric pen, electrical glue
3.1 meter long hard wire, a bottle of butter spray
00:08:Remove the left door trim panel and mirror
01:08:Remove the right door trim panel and mirror
01:24:Remove the rearview camera
02:02:Remove the front camera
02:40:Disassemble the car mirror
04:24:Drilling hole at mirror
05:50:The wire how to through small hole
06:37:Install the mirror back
08:23:How to find trigger wire(The turning light should turn on)
10:16:How to through rear camera wire to front site
10:51:Install front camera
11:20:How to through front camera wire to front site
12:53:Connect the host and interface
13:36:Install the door trim panel back
14:06:Install the side mirror glass
15:56:About calibration tips
We have 3 version chips ,blow is the link from our store .
CR2053 Chips 1080P
www.aliexpress.com/item/10050...
SONY225 chips 720P
www.aliexpress.com/item/10050...
SONY307 chips 1080P
www.aliexpress.com/item/10050...
and SONY225 chips for VAN design camera
www.aliexpress.com/item/10050...
We also have 360 system for bus .the link as below
www.aliexpress.com/item/10050...
Пікірлер: 101
I'm doing a 360 degree both side views and front and back soon , no installation video but after it's done , I'll post the finished video when it's all done.
@carsanbo
Жыл бұрын
You are very kind 😊,let help more people know 360 system installation
@Hasan0698
11 ай бұрын
How'd the install go?
@windolite
9 ай бұрын
@@Hasan0698he never did it
Very informative video! Thank you!
@carsanbo
6 ай бұрын
you are welcome .so glad we can help
Great clean job
Mastery at its best he did not need to keep on testing to see if it's working in between the process 👌
@carsanbo
9 ай бұрын
we advice test the device before installation so we can sure one-stop install
Great workmanship.
@carsanbo
3 ай бұрын
thanks ,hope this video can help
Thank you for your help. All the installation was completed perfectly. I did it by myself whenever I had time, and it took about 5 days. It took at least 3 to 5 hours a day. It took a long time because I did it alone, but I am proud.
@carsanbo
7 ай бұрын
Congratulations,so glad we can help
Very professional and clean job. No scratches and very neat wiring work. Congratulations, I just hope you're in the Philippines 🇵🇭
@carsanbo
Жыл бұрын
Thanks ❤
很好👍🏻
暑そうw でもよく見ると意外と丁寧な仕事で感心。カーサンボのアラウンドビュー製品買うよ!
@carsanbo
Жыл бұрын
Yes,its hot when making installation,not a easy job,just contact us if any question,thanks 😊
@user-hj7kx1hq1y
Жыл бұрын
@@carsanbo My car is a right-hand drive car with a total length of only 3.4 meters. Will your product work?
@carsanbo
Жыл бұрын
@@user-hj7kx1hq1y yes ,it works
Very nice
@carsanbo
6 ай бұрын
thanks
muchas gracias por el video, tenia la duda si la señal de giro funcionaba al parpadear pero con este video demuestra que si la reconoce.
@carsanbo
6 ай бұрын
De nada, el parpadeo del semáforo no afectará la función de activación.
First of all, thank you very much for sharing your video. I just have one question; How should I adjust the orientation when connecting right and left cameras? Is there a sensitive setting I should pay attention to?
@carsanbo
6 ай бұрын
Hello sir ,the right and left camera view image have 1/3 or 1/4 show car body ,You can watch the video on 360 panoramic calibration on our channel, which contains photos of the viewing angle
Thanks for the video. Where should I wire the 2 side cameras if my side mirrors don’t have signal lights? Thanks
@carsanbo
6 ай бұрын
hello ,you can get this signal at car fuse box
Can this be connected to multple screens at once to display panoramic
Hi. I bought this set from you but I don't know how to connect the UART 1 cable. There are two pins. Do you need to provide TX and RX signal from canbus there?
@carsanbo
Жыл бұрын
Hello UART1 is for trajectory host,you need to buy this host alone
@robertzakrzewski1642
Жыл бұрын
And what signal must be sent to the module to read the speed of the car? Will the module disconnect the transmission of the image from the cameras after turning off the reverse gear or will the image remain for a while when driving forward?
@carsanbo
Жыл бұрын
@@robertzakrzewski1642 the trajectory host coming with kind of canbus device ,it can read the car data,like speed ,radar ,door open ,the trajectory line of car ,when finish reverse,the video of 360 system can be set keeping display or screen saver model ,the 360 system always working after car starts
Need to ask one question about the side mirror that If we hole in side mirror, it void warranty?
@carsanbo
4 ай бұрын
We not quite sure about this ,but many new car installed 360 system after sell
Will it work if I just connect the power without connecting the detection wire? Can I use it without connecting the rear left and right blinker wires?
@carsanbo
6 ай бұрын
hello ,of course .you can operate by a remote control
Good afternoon . Please tell me I lost the remote from the device a long time ago. yesterday my system stopped being controlled through the screen. how do i do a factory reset? without the remote and pressing the screen. Thank you
@carsanbo
Жыл бұрын
Hello pls order one more remote ,without remote can not doing any setting
Will this camera record when parked or driving? Kind of like a dash cam?
@carsanbo
7 ай бұрын
yes ,sure .when play at PC .it's split screen with 4 camera video
One small question where do you connect rear camera trigger wire you are showing the connection but not saying any description of it
@carsanbo
3 ай бұрын
Hello rear view camera trigger wire need to connect with reverse lamp +
So on the radio end of the camera wires, where did you wire the red wires to?? You never showed that. I know the camera end red wires go to turn singles hot wires and the rear goes to back up light hot wire but what about the other red wires? thanks.
@carsanbo
10 ай бұрын
Hello ,the other red wire need to connect with radio reverse trigger
@feisal6120
8 ай бұрын
For side cam, the red wire to turn signal then how about the other, where should i connect
@carsanbo
8 ай бұрын
@@feisal6120 hey ,for rear camera ,it connected with reverse lamp + ,I mean the rear camera trigger wire
can you also show how to connect from the camera box to the original screen?
@carsanbo
10 ай бұрын
It need a interface device
@truongkimson
10 ай бұрын
@@carsanbo do you have interface device for ford ranger?
Just curious - for what do you need the left/right signal triggers? My Mirror do not have signals and i don't know if it is neccesary to get the signal somewhere else...
@carsanbo
Ай бұрын
hello sir ,the left and right signal is from car right or left turning light 12V+.not from your mirror screen
@TheOtherArea
Ай бұрын
@@carsanbo Yes i know but do i need the signal, when i need the Camera only for parking mode? I think this signal is only needed during driving?
@carsanbo
Ай бұрын
@@TheOtherArea if you need only for car reverse purpose ,i am advise you just take a reverse system with back up camera only
I'm trying to connect the 360 Bird View product to a monitor that only supports HDMI without navigation. Is there anything else I need besides the monitor?
@carsanbo
8 ай бұрын
you can using HDMI cable to connect with your monitor ,but first you need a AV monitor to do 360 bird view video output setting to HDMI output ,since default output is CVBS and AHD .
What do I do if my vehicle doesn’t come with a stereo system to view or monitor the cameras?
@carsanbo
Жыл бұрын
Hello sir ,you need to buy a monitor alone ,better with ahd pixel ,our store have stand alone type or mirror type if you don’t like the radio android
hello. I am planning to purchase and install a 360 Bird View product and connect ACC to power with a fuse. Should I connect to a 10 amp, 15 amp, 20 amp or 30 amp fuse?
@carsanbo
8 ай бұрын
hello sir ,10amp is enought
6:03 what did he spray for? lubricant?
@carsanbo
2 ай бұрын
yes ,you are right .
你好,美版2017 ES350需要刷机吧?原车屏跟你视频一样小
@carsanbo
Жыл бұрын
你好,需要加解码器才能跟360全景连接
What is the name of the unit and where can i buy it.. i hope you can help😊
@carsanbo
5 ай бұрын
hello,you can order this unit at here www.aliexpress.com/item/1005004410841053.html?spm=a2g0o.store_pc_groupList.8148356.11.16557935pk0xQY&pdp_npi=4%40dis%21USD%21US%20%24389.43%21US%20%24260.92%21%21%21389.43%21260.92%21%40212c01e917028930489887113e99ce%2112000029086528971%21sh%21KR%21235089132%21
But can this process also work on a Mercedes Benz w204 2013 ???
@saucyiwnl
4 ай бұрын
yes
@yahayasojaabubakar7999
4 ай бұрын
@@saucyiwnl do I have to chnage the screen to an after market one or the follow come screen can work perfectly, just need to buy the cameras ???
@saucyiwnl
4 ай бұрын
@@yahayasojaabubakar7999 you need a headunit that has the 360 system support because it is a chip they need to install into the screen
@saucyiwnl
4 ай бұрын
@@yahayasojaabubakar7999 aliexpress has the cheapest ones I would look for a nice looking 360 display that doesnt leave a corner of ur car not seen
which apps used ?
@carsanbo
Жыл бұрын
Hello sir ,our system not using app ,it can not connect with phone
How to connect the infrared receiver to the box?
@carsanbo
17 күн бұрын
Hello by VGA cable
@RashdanBb-eq6nj
13 күн бұрын
@@carsanbo thank you. You are the best. Just plug and play right,
@carsanbo
8 күн бұрын
@@RashdanBb-eq6nj you need to go to video output setting choose VGA output
大哥 左右的电线接了门那里 然后进去车里面的红色左右电线还需要接哪里
@carsanbo
Ай бұрын
是接转向灯的正极,这个是转向视角触发线
how i can add 360 view in my sienna 2021 original oem radio
@carsanbo
7 ай бұрын
Pls check if OEM radio support cvbs input or not ,if yes ,then okay ,and the second option is add the interface
@user-gf7lg4lf8l
7 ай бұрын
oem radio has 3 28 pin harness i don't knw which is for video middle, side by speaker wire or the last one please reply me thank u@@carsanbo
how to get the video footage out of the system ?
@carsanbo
Жыл бұрын
There are have a usb memory card for recording video
Does it fit tucson 2023
@carsanbo
Жыл бұрын
Hello sir ,our item is universal,only your radio need support ahd or cvbs signal input
@aleajactaest4975
11 ай бұрын
@@carsanbo Καλησπέρα φίλε μου. Το Pioneer AVH-Z7200dab μπορεί να υποστηρίξει αυτά τα συστήματα καμερών.;; Ευχαριστώ εκ των προτέρων.
Tôi đã mua camera của các bạn nhưng không có interface kết nối. Giúp tôi với
@carsanbo
6 ай бұрын
which connector you dont have ?it coming with AHD and CVBS RCA output
Why do you need this on a small car
@carsanbo
Ай бұрын
there are have some blind spot there
I was thinking of adding cameras to my car but never mind it’s a lot of work and probably expensive to hire someone
@carsanbo
Жыл бұрын
Yes,it need some shop who have experience doing this ,normally need to take 2-3 hours
This is so time consuming and required at least 2 skilled professional workers to get the job done properly.
@carsanbo
6 ай бұрын
if the first time install .it take times to doing this
terrible wiring job, none of it was soldered or securely connected together
@carsanbo
5 ай бұрын
Yes ,I am agree with you,if he wraps the connection with a heat shrink tubing ,it will be great
is bird view is virtual
@carsanbo
17 күн бұрын
Yes ,you can see more our video know about 3D bird view
Location nyo sir? ano contact number nyo po
@carsanbo
Жыл бұрын
hello sir .we are in Baiyun Guangzhou .please send your inquiry to info@carsanbo.com