Really appreciate how you take good of your machines,plus I am starting to get addicted to your very informative videos!

@TwoWheelRocco

2 жыл бұрын

Happy to help.. Thank you for watching and all your kind words Ken. Ride safe and have a great day.

Really enjoy watching your videos Rocco. You got a great way of gently talking viewers through the process.

@TwoWheelRocco

11 ай бұрын

Happy to help. Any questions just ask. Thank you for watching and all your support Dr. prepper. Ride safe and have a great day.

Always appreciate your tips and step by step how to videos

@TwoWheelRocco

2 жыл бұрын

My pleasure. Thank you for watching and your support Wayne. Ride safe and have a great day.

I just did this maint on my 2005 FLSTNI. Your video was spot on as always. Tanks Rocco!

@TwoWheelRocco

Жыл бұрын

Happy to hear all went well. Thank you for watching and your support Kim. Ride safe and have a great day.

Always watch your Harley related content. Very informative, keep them coming.

@TwoWheelRocco

2 жыл бұрын

Happy to help. Any questions just ask. Thank you for watching and your support Lukasz. Ride Safe and have a great day.

@donmorris9124

2 жыл бұрын

Hey lukasz what is a hammerfor

Good to see you back making content!

@TwoWheelRocco

2 жыл бұрын

Thank you my friend for all your support. I am feeling a lot better. Ride safe and have a great day

Thank you for sharing the knowledge. I like your number one rule: "Don't get crazy"

@TwoWheelRocco

2 жыл бұрын

My pleasure. Thank you for watching and your support Abe. I learned the hard way believe me when I was a kid. But as we get older, patients. Ride safe and have a great day

Great Video as always 👏🏼👏🏼👏🏼👏🏼👏🏼, keep it up Roco✌🏼✌🏼

@TwoWheelRocco

2 жыл бұрын

Happy to help. Any questions just ask. Thank you for watching and your sub Mohamed. Ride safe and have a great day.

Well sir, another wonderful video. Thank you for sharing. I like your channel b'c you seem to work on Road Kings of the ilk I have. I purchased my 1st RKC (2006 Inj. w/38,000mi) from an original owner in 2021 (early Fall). The bike was great looking and mostly mechanically sound. The speedo didn't work but I wanted to replace it w/ the new version 600 LED light scheme & tack speedo anyway. I changed the speed sensor as well and she's working fine now. The gas gauge didn't work and I tried the pump assm. but, although the schematic shows the float included, it didn't come in the kit and had to send it back. I replaced the caps w/ the Blue LED Harley version and although the LED's do come on, they all register at ignition and turn off one by one , leaving only one of 5 on perpetually. Even when the tank is 1/2 or full. I have a fuel sensor unit on order but it's been on back-order for 3 months now and the new ETA is May sometime. :( I did several preventative maintenance actions (oil, trans fluid, new gangster whitewall tires & balance, LED Headlights & Fogs, new windshield & tinted the lower 1/2. Lastly, a brand new 1-1/4 diameter Lindby Magnumbar) w/ the help of many of your video's !! Thanks BTW !! :) I'm glad to see the care needed for the air cleaner in this video as well. But, I sent it in for a for a 40k service to Cowboy's HD (Beaumont, TX.) Great dealer btw. I'm actually a Louisiana boy in Leesville, LA. and Taboo HD in Alexandria, LA. is only and hour away. But, I wouldn't send my worst enemy there. I like Cajun HD in Lafayette, LA. but they are 10 min farther than Cowboys so , there's that. I do business w/ both and happy they are w/in 2 hours of me. Anyway, Cowboy's thought it was a wonderful bike that was taken care of well. They confirmed the guy I bought it from was the original owner, complimented me on the up-grades I made and gave me a T-shirt & a couple of poker chips for me and my riding partner (Doc, w/ his new, used but only 1 owner 2017 Street Gliude) He's a 21 yr Ranger medic vet w/ 9 combat tours. One tough hombre and president of our III % riding club. However, they did find the clutch plates were shot. I had an idea they might be b'c after riding about 6 mi the bike would try to seize or bog down and struggle to move when letting out the clutch. It would change gears but struggle to move. The plate were getting hot and seizing to each other. Once cooled I could drive it a bit again. WE CHANGED THE CLUTCH PLATE ASSY. and been on several small 3 or so hour trips w/ zero issues. I'm one happy camper as they say :) If you have a t-shirt, and /or can get me any white longsleeve XXL t-shirt w/ colorful logo from a dealer near you and their poker chip, I'd love to send you the fee :) Just a thought and don't think twice if it's too much trouble :) Thanks again, Sincerely ........................ Steph P.S. You're welcome to message me on FB for correspondence here : Steph Boeker tinyurl.com/2p95ae6h

@TwoWheelRocco

2 жыл бұрын

Happy to Help, sorry I don't have no T-shirts. But I do appreciate all your kind words. Thank you for watching and your support Steph. Ride safe and have a great day

Excellent video, thanks for the good information.

@TwoWheelRocco

7 ай бұрын

Happy to help. Any questions just ask. Thank you for watching and all your support John. Ride safe and have a great day.

Hey Rocco, top tips as usual. I have a base gasket to do on my sporty, and cam tensioners on my Dyna, if I get in a clinch I will tap you up. Cheers Rocco.

@TwoWheelRocco

2 жыл бұрын

Happy to Help. Any questions just ask. Thank you for watching and your support Simon. Ride safe and have a great day

Nice job...beautiful bike. Thanks for sharing 👍

@TwoWheelRocco

2 жыл бұрын

Happy to help. Any questions just ask. Thank you for watching and your sub Rick. Ride safe and have a great day.

Great vid. Vented the heads to a catch can and everything is much cleaner in the air box

@TwoWheelRocco

2 жыл бұрын

I Agree. It's a customers bike. I think it's gorgeous. It runs great but you definitely gotta keep an eye on that air filter. I was surprised. Thank you for watching and all your support. Ride safe and have a great day.

That’s my “Blue Bird” I have a 16’ Road King “Cosmic Blue” I get complements everyday I ride which in Houston area,, I’m able to ride 9 out of 10 days,, hot, but sunny. Thank you Rocco!

@TwoWheelRocco

2 жыл бұрын

Happy to help. Great Bike. Thank you for watching and your sub BBS. Ride safe and have a great day.

Love it rocco!

@TwoWheelRocco

4 ай бұрын

Happy to help. Thank you for watching all your support boxkev. Drive safe. Have a great day.

Nice. Just encountered the same issue on my 2010 Electra

@TwoWheelRocco

2 жыл бұрын

Happy to help. Let us know how it works out. You will be happy.. Thank you for watching and your sub Jens. Ride safe and have a great day.

Might be better practice to blow compressed air from the inside (as best you can) of the air filter. Blowing from the outside will typically jam dirt further into the element.

@TwoWheelRocco

2 жыл бұрын

Thank you for the comment and all your support Len.. Ride safe and have a great day.

BEST PERIOD.

@TwoWheelRocco

2 жыл бұрын

Happy to help. Thank you for watching and your sub MD. Ride safe and have a great day.

I see that Vet sneaking in the background 😎👍🏼

@TwoWheelRocco

2 жыл бұрын

I Love that Car.. Owned her 40 years. Thank you for watching...

Love the video’s too

@TwoWheelRocco

2 жыл бұрын

Thank You..

Thank you 😊

@TwoWheelRocco

2 жыл бұрын

My pleasure Larry. Ride safe and have a great day.

Thank you for this! I’m noticing some hesitation in throttle response here and there w/ my Road King…I’ll try this first before taking more extreme measures. 👍🏼👍🏼

@TwoWheelRocco

2 жыл бұрын

Happy to read all went well. Thank you for watching and your sub Andy. Any questions just ask. Ride safe and have a great day.

@bikersoncall

Жыл бұрын

Did it help Andy, what did you use? My '09 Electra Glide is running just a bit rough, not terrible, not perfect.

@bikersoncall

Жыл бұрын

@@TwoWheelRocco How do you know it 'went well' ?

@andygalushko2695

Жыл бұрын

@@bikersoncall yes, noticeably better. I used the same product he used in the video. Hesitation and popping 95% gone…I’m thinking a new air filter may fix it completely 👍🏼👍🏼

@bikersoncall

Жыл бұрын

@@andygalushko2695 Thanks man, I'll try that, and clean the filter as well.

Thanks!!

@TwoWheelRocco

2 жыл бұрын

My pleasure. Thank you for all your support. Ride safe and have a great day Redstripe.

Cool content 👌 😎 👍.

@TwoWheelRocco

2 жыл бұрын

Happy to help. Thank you for watching and your support Theone. Ride safe and have a great day.

as always very helpful thanks. one question your opinion on an external breather kit

@TwoWheelRocco

2 жыл бұрын

Happy to help. I like OEM or Screamin eagle products keep everything tight to the motor. That's just my preference. Thank you for watching and your sub Theo. Ride safe and have a great day.

More preventive maintenance for longevity and avoidance of breakdowns . Thanks Roc

@TwoWheelRocco

2 жыл бұрын

Happy to help. Thank you for watching and your sub Dan. Ride safe and have a great day.

Nice Bike !

@TwoWheelRocco

Жыл бұрын

Thank you she is sweet. Drive safe and have a great day.

What is the difference between Berryman B-12 Chem Tool Throttle Body Cleaner and Berryman B-12 Professional Chem Tool Throttle Body Cleaner? Love your videos. Keep 'em coming.

@TwoWheelRocco

2 жыл бұрын

Happy to help. Good question I don't know the difference. I believe it's just an advertisement trick.. Thank you for watching and your sub CCP. Ride safe and have a great day.

I swapped out air cleaners and when I pulled the old one there was oil on the breather bolts and oil on the screws that hold the a/c onto the throttle body. I'm gonna used q tips to clean the threads before I install the new a/c with blue loctite. Could I use something else or soap n water w q tips? Thanks much. Your channel is awesome. Common sense and explained perfectly.

@TwoWheelRocco

2 жыл бұрын

Happy to help. I use brake cleaner. Make sure the oil level is halfway on the dipstick. if you're filter is oil soaked at the bottom there's a good chance you have too much oil in your motor. Thank you for watching and your support Sgt Rock. Ride safe and have a great day.

Beautiful Bike.

@TwoWheelRocco

Жыл бұрын

Thank you for watching and your sub BikeOC. Ride safe and have a great day. Let us know how it works out.

@bikersoncall

Жыл бұрын

@@TwoWheelRocco Thanks man, you be safe out there too!

Open the throttle with bike off and use a brass brush with the spray to clean butterfly area...! .....Nice ride"

@TwoWheelRocco

5 ай бұрын

Happy to help. Thank you for your advice and all your support Mike. Ride safe and have a great day.

My 2003 883 air filter seems to drip some stuff out on to the exhaust bar under it. What would cause it to do that???? Is it running to high or something???

@TwoWheelRocco

2 жыл бұрын

Happy to help. Too much oil in your bike. Sportster's like the oil to be halfway between the two marks on your dipstick. clean the filter and check your oil. Let us know how it works out. Run halfway on the dipstick. Thank you for watching and your support Scotty.. Ride safe and have a great day.

Do you have to pull the map sensor to clean it . Thank's for your time.

@TwoWheelRocco

Жыл бұрын

Happy to help. You can clean the map sensor as best as possible through the throat of the carburator. Thank you for watching and all your support 69littletoy. Ride safe and have a great day. Throttle body cleaner will handle the job.

my 2010 883 sportster runs good, idles good. But, even after riding an hour, I can stop for 15-20 minutes and when I start it up it will idle at 12-1300 rpms for 2-3 minutes before it settles down to normal idle. I have replaced the temperature sensor on the rear head. It shows no error codes. have also cleaned the the throttlebody and IAC.

@TwoWheelRocco

Жыл бұрын

Happy to help. That will be the IAC sensor clean and re-clean. Common problem which isn't really a big problem like you stated. But can be a little annoying, Any questions just ask. Thank you for watching and your sub Woody. Ride safe and have a great day.

I can do this also on carb with the spray?

@TwoWheelRocco

Жыл бұрын

Happy to help. Yes, you can use this on your carburetor.It works well.Thank you for watching and all your support Joe. Ride safe and have a great day.

How about that C2 Corvette in the background? What year is that and what engine is under the hood?? Also, beautiful Roadie. I have a Heritage now but want to get me a newer Roadie in the future.

@TwoWheelRocco

Жыл бұрын

1965, 396/425HP. L78. Original motor. I've owned this car since 1981 Road Kings are great bikes. I love them, I've had that one for years. Ride safe and have a great day and thank you for watching and all your support boosted Mayham.

@BoostedMayhem

Жыл бұрын

@@TwoWheelRocco 1965 L78 Stingray... You had me at L78...LOL. I LOVE C2s!! Any videos of that beast?!?! Be safe and have a great day yourself, Rocco!!

@TwoWheelRocco

Жыл бұрын

@@BoostedMayhem Watch the whole video. I pull a nice whole shot at the end. And thank you for watching. .kzread.info/dash/bejne/dHh4mJOBfcu3lqg.html. Let me know what you think. I love this car.

Should you remove spark plugs after and clean or replace them

@TwoWheelRocco

Жыл бұрын

Happy to help. No, you do not have to. Thank you for watching and your support Manuel. Let us know how it works out. Ride safe and have a great day.

Revving the engine and opening the throttle body with out the cover on is safe for the engine? Granted I noticed you didn’t crack it wide open.

@TwoWheelRocco

2 жыл бұрын

Happy to help. I'm not comfortable with cracking throttle wide open. Not good for your motor. Thank you for watching and your sub Bo. Ride safe and have a great day.

Hey Rocco love your videos !! I was hooding you can give me some advice. I have a problem with 98 dyna wide glide, let me start from the beginning I had a petcock swapped out because I had small drip and ignition sensor pick up changed out and went from screaming eagles to Vance and home pipes bike was stored at Harley dealer ship over winter and they did the work picked it up in April took it straight home but didn’t ride it till a week later I live 10 mins from dealership the first time I took it out for a long ride 2 weeks later it stalled out start popping from exhaust island I hear like a clicking or also sounds like a shortage sound coming from throttle or from carb area some times like a clicking noise and never fails to stall out always after 20 mins to 25 mins of riding then I got to wait 15 to 20 mins to restart please help here’s what I done so far a buddy of mine told me to do I changed ignition coil , I bought a new gas cap , and rejected the carb to a 45 from 42 he said since I put Vance and Hines I had to go up on jet ?

@TwoWheelRocco

2 жыл бұрын

Happy to Help, How long did you own this bike? Did it ever run right? Sounds like bad float needle jet in carburetor. Thank you for watching and your sub Steve . Ride safe and have a great day.

@stevegutierrez8926

2 жыл бұрын

@@TwoWheelRocco I owned it since august 2021 and it did run just perfect at at first until I picked it up from storage Harley dealer ship is the float needle different than the main jet I know they went up from a 42 to a 45 they re jetted it

@TwoWheelRocco

2 жыл бұрын

@@stevegutierrez8926 yes it is different. Do you see gas on the floor? Does that Carb have an overflow hose? Is it damp with some fuel? Take a look at this video, kzread.info/dash/bejne/poeTj69tgti9k5c.html. Let us know what you think.

@stevegutierrez8926

2 жыл бұрын

@@TwoWheelRocco I don’t see gas on floor and it does have over flow hose not sure how to check if damp ? And will bad float needle cause bike to stall after 20 mins of riding? And exhaust popping ? And for some reason I hear a popping clicking noise coming from air filter / carb area every time it’s stAll out and then I wait 10 to 15 mi s to restart it and ride home ? Are those symptoms bad float needle?

@TwoWheelRocco

2 жыл бұрын

@@stevegutierrez8926 No you do not have a bad float needle. I would test your Petcock for a vacuum leak in your Diaphragm, this will cause the shut down this will cause the air that's causing the Poppinga detonation sound. Check all vacuum hoses. how does she idle? It sounds like you're getting starved of gas and the popping is air. For what you have told me that's where I would start, Petcock. I will send a video. Test it. kzread.info/dash/bejne/aXqjm7NyY7KwiKw.html. Let us know..

Go K/N Air Filter that you wash, re oil, and re use. Do the oil to the breather bypass with the catch can, stop sending that oil to your breather and engine. DK Customs offer these, or you can make your own. At least look into it. I love mine, and it's easily concealed. Only you will know, and no more mess!

@TwoWheelRocco

11 ай бұрын

Thank you for your tip. And all your support. thangknows. Ride safe and have a great day.

Can we use WD 40 for cleaning iac system

@TwoWheelRocco

Жыл бұрын

Happy to help. I don't think so. Try it and let us know. I don't think I'll be promising my opinion. Thank you for watching and your sub.Rajesh. Ride safe and have a great day.

Is it best to do it cold ? Or warm it up first ?

@TwoWheelRocco

2 жыл бұрын

Happy to help. I don't think it matters warm or cold. You might have to do this a few times to clean the sensors. Thank you for watching and all your support Michael. Let us know how it works out. Ride safe and have a great day.

Run the crankcase breather to a catch can or to the ground so simple air cleaner will be clean forever

@TwoWheelRocco

7 ай бұрын

Thank you for your insight and all your support Pan Heads forever. Ride safe and have a great day.

Can those filters be washed?

@TwoWheelRocco

Ай бұрын

Happy to help if it's a reusable filter it will be made out of a cloth. If it's a paper and bedding filter that's cannot be cleaned. They need to be replaced with a KN filter. Do not put there oil on the filter. run it dry, filter last longer. compressed, air to clean, reinstall, thank you for watching, and all your support. silver bullit. Ride safe and have a great day

I’ve got a question I hope someone can help me out with I have a 2011 Dyna street bob that does not idle right I’ve changed the spark plugs, cleaned out the throttle body, cleaned the filter and checked the throttle wires Everything seems fine but still sounds like it’s going to boggle out then the rpm’s shoot back up. Tps maybe? Thank you in advance

@TwoWheelRocco

Жыл бұрын

Happy to try to help. What type of pipe are you running on this 2011 Dyna?

@Jay_Hernandez96

Жыл бұрын

@@TwoWheelRocco I highly appreciate the quick response! I just have Vance and Hines slip ons

@TwoWheelRocco

Жыл бұрын

@@Jay_Hernandez96 Fuel management system to straighten out your problem. Put the stock slip on pipes back on. See if it runs well. Let us know how it works out.

@Jay_Hernandez96

Жыл бұрын

@@TwoWheelRocco unfortunately I do not have the originals. I bought the bike four years ago with the slip ons already installed. It never gave me a problem until just last week could it maybe be something else? I just purchased a tps and will install tonight I’m hoping the sensor is the issue

@TwoWheelRocco

Жыл бұрын

@@Jay_Hernandez96 With that piece of information, that would be the best place to start and probably will resolve your problem. Let us know how it works out.

Never use compressed air on the air filter, and you clean it from the inside out, not outside in. He's only pushing the bad stuff deeper into the filter.

@TwoWheelRocco

Ай бұрын

You're taking things too serious Ken, really next you will be telling people how to brush their teeth. You are right, but come on now. Ride safe and have a great day.

It'd be a good idea to fix your crankcase breather, it's going right into your throttle body.

@TwoWheelRocco

10 ай бұрын

Happy to help. I'm a big OEM guy. This is the way it was designed. I try not to create problems. If I want something that's high-performance. I'll get into my. GSXR territory. As for my Harley. I don't get tickets and that's why I love the bike. my little shopper.. Thank you for watching and all your sup, Great SRT. Love those mopar. Ride safe and have a great day.

@goodinsrt8

10 ай бұрын

@@TwoWheelRocco pumping oil through your throttle body is a problem.

@panheadsforever74

7 ай бұрын

​@@TwoWheelRoccoit's designed that way because of EPA told them to

@TwoWheelRocco

7 ай бұрын

I agree. Ride safe and have a great day.@@panheadsforever74

@panheadsforever74

7 ай бұрын

​@@TwoWheelRoccoyou see those 2 rubber hoses coming off ur crankcase breather? Buy a tee and 2foot of hose run it to the ground. cost bout 10 bucks ur throttle body will suck in nothing but cold,clean,air

That sure is a small air filter for such a big engine! Looks like it could use a bigger air box and filter like maybe a big sucker or something!

@TwoWheelRocco

2 жыл бұрын

Happy to help. I'll leave that up to the engineers at Harley Davidson. I like clean running motorcycles. I'm not one for reinventing the wheel. Been there done that. stressful I just wanna ride. Thank you for watching and your support. Ride safe and have a great day

Is this a injected model

@TwoWheelRocco

2 жыл бұрын

Happy to help. Yes it is injected model. Thank you for watching and your sub Joshua. Ride safe and have a Great Day.

Oh boy…. I guess I should change mine. It’s black

@TwoWheelRocco

2 жыл бұрын

I agree, thank you for watching and your support local liquid. Any questions just ask. Change that air filter. Ride safe and have a great day.

Too much oil in the engine ( DOES NOT) cause blow by . Only 1 thing causes blow by >> COMPRESSION leaking by the piston rings to the inside of the engine , in other words the cylinders need bored and/or honed and new piston rings . The other thing is , when the pistons travel up and down the cylinder , on the down stroke it creates a pressure threw the engine , on the up stroke it creates a vacume >> this is normal engine ventilation for any piston engine . Harley chose to use the very low profile head breathers inside the valve covers , the breathers are not tall enough to allow enough room (not tall enough) to allow proper separation of the oil and air before it goes to the air cleaner , now add piston rings leaking to that (actual blow by)and you have a real oily air cleaner problem , its that simple . A donaldson oil bath air filter is a good example of what Im talking about , the air comes threw the oil in the bottom and up threw the tall metal mesh wire where it separates the oil from the air and then the air goes into the intake . You might be surprised how many harleys are running around with leaking cylinders and scuffed/scored cylinders , it only takes about a cheap 10.00 dollar bore scope from ebay that works with a phone and/or lap top , down threw the spark plug holes looking at the front and rear of each cylinder for scuffing/scoring . Or check the compression , anyone having EZ start cams can not check their compression . A oil build up on the Tmap sensor from the above can ruin your engine , it controls the injectors and amount of fuel (rich or lean) along with the temp sensor . Now do what ever you want , you paid for it .........

@TwoWheelRocco

Жыл бұрын

Only trying to help. I have noticed a lot of people put too much oil in their motors. What happens I believe is the check valve bleeds and then people put more oil in the motor thinking that it's low on oil. A lot of people let their bikes sit for weeks and months on end. And this allows the oil to bleed pass check valve. This give you a false oil dipstick reading. Thank you for watching in your comment. You are right on the money but sometimes, other things that go into the equation. Ride safe and have a great day. Looking to hear from you again.

@charlesmccormick4443

Жыл бұрын

@@TwoWheelRocco You said ( A lot of people let their bikes sit for weeks and months on end. And this allows the oil to bleed pass check valve. This give you a false oil dipstick reading.) Thats true , my 06 1200C sumps like that all the time , any bike that the oil tank sets up high on it will do that , and your suppose to run the bike some then check the oil , but , that has nothing to do with what I explained earlier , concerning blow by , ventilation of the engine and the head breathers . Like I said before , you might be suprised how many are running around with the rings leaking compression into the engine block , unstable jugs that even distort when torqued down and that includes using torque plates , also running around with oil pump returns not working correctly causing oil sumping in the engine block and causing the engine to run extremely hot and that type of sumping includes bikes like my ultra that has the oil tank on the bottom of the transmission .

@TwoWheelRocco

Жыл бұрын

@@charlesmccormick4443 Harley Davison you got a love them. Thank you for watching and sharing.

You lost me at Blowing inside shop and cleaning air filter with compressed air???

@TwoWheelRocco

Жыл бұрын

Sorry to hear that. Just trying to help. Thank you for watching and your comment. Ride safe and have a great day.