How to hardwire/install a Viofo A129 to a 2020 Subaru Forester

Автокөліктер мен көлік құралдары

In this video, I will be showing you how to install a dash camera into a Subaru Forester. This method can be used by any car and really, any Subaru. If you have any questions, please feel free to contact me at htxdashcams.com.
If you want to support this video, you can purchase the dash camera here, htxdashcams.com/product/viofo...

Пікірлер: 113

  • @readyreadyrolingphotograph5534
    @readyreadyrolingphotograph55344 жыл бұрын

    Wish the volume was louder. Thanks for doing that!

  • @seanverner3407
    @seanverner3407 Жыл бұрын

    I just installed the A129 into my 2020 Forester after watching this video. What you can't see in this video is the curtain airbag seen on the A-pillar continues all the way to the back of the door(under the headliner). There is also a curtain airbag over the rear passenger door. I don't recommend just tucking the wire for the rear camera up into the headliner. It may interfere with the airbags if they are deployed. I chose to run the cable down the A-pillar and under the door sills. The 6 meter cable that came with the A129 was not long enough. I had to order the 8 meter cable.

  • @moonpie817
    @moonpie8173 жыл бұрын

    I have the same model car (2019 Forester) and camera and had no prior experience hard-wiring electronics in my car, this video made it super easy to figure out. Thanks for posting!

  • @ussreeves
    @ussreeves Жыл бұрын

    Just used your video to install the wiring on my 2018 Forester. I followed your instructions and it went perfectly. I was a little nervous around the airbag but everything you did helped me get the wiring behind the airbag. Thanks for posting this video.😊

  • @ongta1265
    @ongta12654 жыл бұрын

    Nice 2020 Forester Sport bro. Your installation video is the BEST, I am glad that my family only owned Subaru and this will help a ton. Thanks! Updated after one year. This video is the best, the dash cams look beautiful in my Legacy and wife's Outback, and next would be one install for a 2011 Tribeca we just purchased for our son, Limited loaded and one owner with pristine condition, bluetooth, homelink, power seats, heated seats, backup camera, navigation work like a gem. One suggestion though, I installed the dash cam to the right of the rearview mirror so it's easier to adjust the mirror for driver's viewing!

  • @pungent007
    @pungent0074 жыл бұрын

    ?? Problem with the sound... I have external speakers, every volume setting is at max, and can barely hear a mumble. :-(

  • @MountainBikerT17
    @MountainBikerT172 жыл бұрын

    Excellent video, I'm adding my A129 into my new (to me) 2020 Outback and was wondering the best way to remove the paneling on the left, was not expecting you to show how to wire it for the rear, VERY HELPFUL. On my other car I never properly installed the rear camera as I thought I'd need to remove the headliner, never thought of just going along the outside edge.

  • @ussreeves
    @ussreeves Жыл бұрын

    I will use your video as my guide for my dashcam installation in my 2018 Forester. Thanks for sharing it. Seems like it has helped a lot of others as well.😊

  • @gittalittle3834
    @gittalittle38342 жыл бұрын

    Outstanding video. Worked for my 2020 Outback as well. Thanks for posting!

  • @fernandourrea3677
    @fernandourrea36773 жыл бұрын

    Wow thank you very much for the tutorial now I want to buy a new radio with the screen and camera so I can install it on my 2006 Subaru. This video is the one that I was looking for, it shows and explain everything especially the rooting of the cable back to the camera.

  • @klavesin

    @klavesin

    Жыл бұрын

    I thought my 2008 Forester was ancient :)

  • @heygeo
    @heygeo4 жыл бұрын

    Hey man! thank you for this. My car (Forester ‘19) is exactly like this. I followed all steps and I was able to install it. The only challenging part was removing the rubber thing at the back where you pass the usb wiring. Putting it back was a pain as the rubber separated from the plastic lock. I was able to put it back on both ends after several painful tries.

  • @infoscript8555

    @infoscript8555

    4 жыл бұрын

    hi, mind sharing which fuse panel # did you use for battery. thnks

  • @heygeo

    @heygeo

    3 жыл бұрын

    Just use the “Illum” slot as shown in the video

  • @tonywang5181
    @tonywang51813 жыл бұрын

    Thanks for the video, very detailed on each step , especially helpful to DIYer. tho sound is minimum, glad still listenable.

  • @jamiesigg3454
    @jamiesigg34543 ай бұрын

    Just installed mine. Great help. Thanks!

  • @minkuan5194
    @minkuan5194 Жыл бұрын

    Excellent vid. Many vids are shaky and not clear. Your vid is certainly going to help me install a hard-wired dashcam in my Forester this weekend. Thanks!

  • @ryanlim2104
    @ryanlim21042 жыл бұрын

    Excellent instructional video. Thanks for sharing this video

  • @barrygervais7771
    @barrygervais77713 жыл бұрын

    Volume was very low I was able to follow all the instructions, I also have a 2020 Forester and i think the same camera a VIOFO A129 Pro Duo 4K i have it running to the back hatch thank you again

  • @bradbrizzle658
    @bradbrizzle6583 жыл бұрын

    I wish you had shown how to get the wires around the eyesight😐

  • @mattmuller1353

    @mattmuller1353

    2 жыл бұрын

    This video shows it a little better kzread.info/dash/bejne/h6tmtJmGZZrAaNI.html

  • @TheDoorDashCam

    @TheDoorDashCam

    8 ай бұрын

    Right? That’s really the only part you need lol

  • @Patrick-nl6ug
    @Patrick-nl6ug9 ай бұрын

    Thanks, this video helped a lot!

  • @jeffginsburg3603
    @jeffginsburg36033 жыл бұрын

    Great tutorial!

  • @vivekpatel5500
    @vivekpatel55004 жыл бұрын

    This is great! I have a 2020 forester and the same dash cam!

  • @victortm1687

    @victortm1687

    3 жыл бұрын

    I recently bought the 2020 forester and Viofo duo dash cam

  • @frankocean7755

    @frankocean7755

    3 жыл бұрын

    Can you send me a link to your add a fuse? Mine didn't fit the fuse box

  • @jamfriday

    @jamfriday

    2 жыл бұрын

    I’m planning to buy the same dashcam. But for the placement, does it cause any issues with eyesight?

  • @geelloo76
    @geelloo76 Жыл бұрын

    Thanks for the video. Great help

  • @psiquetpgmail
    @psiquetpgmail4 жыл бұрын

    Thank you for the tutorial, one question though... why didn't you choose an empty socket for the power?

  • @maxmouche
    @maxmouche Жыл бұрын

    thank you so much for this!

  • @AmrikSaini
    @AmrikSaini2 жыл бұрын

    Great video thanks

  • @AdolfosTube
    @AdolfosTube Жыл бұрын

    Very helpful, thank you! Have you had any issues with the Viofo blocking the Subaru EyeSight system?

  • @infoscript8555
    @infoscript85554 жыл бұрын

    hi i have 19 forester, did the hard wiring as yours .. any idea why the cam dosn't stay on when the engine is turned off. in other way which is the best fuse box to use for the parking mode

  • @nopalez100
    @nopalez1006 ай бұрын

    do you take care of the side impact air bags? when routing the cable to the back camera? can you please confirm.

  • @tk45440
    @tk454402 жыл бұрын

    i know very little about fuses, do you know which fuse taps worked for this project? Thinking of jumpin on it soon

  • @castlebeowulf6294
    @castlebeowulf62944 жыл бұрын

    Good job

  • @alexyau7357
    @alexyau73572 жыл бұрын

    Hi, thanks for the tutorial, however I have some questions, I have the same car as the one in video, but when I plug the acc into the fusebox as u do, the air conditioner and the screen of the entertainment device dont work. Am I doing anything wrong?

  • @tsgt2007
    @tsgt20073 ай бұрын

    Great video. Did you ever installed a homelink rear view mirror as an upgrade on your forester?

  • @Subie-Driver
    @Subie-Driver Жыл бұрын

    Good video. One question. Getting the grommets out was easy…getting them back in the same way does not work. How did you tuck that small rubber rim back into the opening? That is a key factor in its water tightness. Key thing you left out out of your video.

  • @TonyNovation
    @TonyNovation3 жыл бұрын

    Thank you! Thank you! Thank you!

  • @michadziewiczkiewicz9774
    @michadziewiczkiewicz97748 күн бұрын

    Hi, very practice video. One question is this connection let your camera working all the time? if yes, is it drain battery a lot?

  • @c.s.i.inamerica2420
    @c.s.i.inamerica24202 жыл бұрын

    Thanks for sharing this info! It looks like you attached the rear camera to the rear window. Have you had any trouble with it popping off due to adhesive problems?

  • @charlesebyjr2925
    @charlesebyjr2925 Жыл бұрын

    Where do you live, I’ll drive to your place and you can install my rear camera, haha 😂, nice clean job, thanks 😊

  • @madarapubg9940
    @madarapubg99403 жыл бұрын

    Would the instillation be the same in a 2021 Forester sport

  • @thomashusen
    @thomashusen4 жыл бұрын

    Great video. I plan on hardwiring the A129Pro Duo in my 2018 SFxt. Do you happen to know if there is any variation between which fuses you're using compared to the 2018? Thanks!

  • @thomashusen

    @thomashusen

    4 жыл бұрын

    I used the same method, but no go. I'm not sure what the issue is, but it doesn't turn on.

  • @mangimadang130
    @mangimadang130 Жыл бұрын

    How did you get the rubber grommet in the hatch back into the slot?

  • @whitefang8329
    @whitefang83297 ай бұрын

    Thank you for Tutorial. It helps A LOT 🫡👍

  • @mikewilson58
    @mikewilson583 жыл бұрын

    Same fix works for the 2019 SJ Forester.

  • @bryanjones9696
    @bryanjones9696 Жыл бұрын

    How did you route the wires around the eyesight camera?

  • @MrMGnome
    @MrMGnome3 жыл бұрын

    Does the mount position mess up the eyesight system at all? I just got a 2020 Outback and I am trying to figure out where to mount the camera

  • @htxdashcams2127

    @htxdashcams2127

    3 жыл бұрын

    It doesn’t

  • @dwightmanne
    @dwightmanne3 ай бұрын

    3:21 I wish you could have shown you testing all the ones for hot for those that don’t have a test light.

  • @akc5247
    @akc52474 жыл бұрын

    Thanks for this video! The 2020 Forester manual says that we shouldn't install anything in the eyesight area, so wondering if have issues with the dash cam right beneath it?

  • @krazytaco

    @krazytaco

    3 жыл бұрын

    I just installed a dashcam a few days ago in the 2020 Forester Sport - eyesight hasn't had any problems at this time.

  • @kurtroth6131
    @kurtroth61314 жыл бұрын

    Very nice install, I do have a question, how did you get the cable around the eyesight cameras?

  • @htxdashcams2127

    @htxdashcams2127

    4 жыл бұрын

    Kurt Roth lift the eyesight slightly. Same force as the headliner. Then move the wires in where the eyesight is.

  • @CareyP

    @CareyP

    4 жыл бұрын

    HTX Dash Cams will that work for the eye sight console on the 2020 Ascent?

  • @gorby3274

    @gorby3274

    2 жыл бұрын

    @@htxdashcams2127 do you mean pull down the housing for the eye sight camera and run in the gap between the windshield and the eyesight housing? will that somehow interfere with the eye sight?

  • @PrimeSuperboy

    @PrimeSuperboy

    2 жыл бұрын

    @@gorby3274 The housing for the eyesight does not affect the fixed location of the cameras themselves. You should be able to separate the two.

  • @TheRcktstar
    @TheRcktstar12 күн бұрын

    i have used this video to install my dash cam for 21 forester, having issues with my car batt being drained and dying where i cant start the car. anyone else experienced this? or have any suggestions?

  • @dannyyong7221
    @dannyyong7221 Жыл бұрын

    Did you disconnect the battery before you did it?

  • @rit1chea
    @rit1chea2 жыл бұрын

    Info is great! Video (filming) is excellent. Why the background noise/music????

  • @maxperez6760
    @maxperez67602 жыл бұрын

    Do you have eyesight? Wondering if it interferes. Want to do this on my outback

  • @a.chiddarwar
    @a.chiddarwar2 жыл бұрын

    How long did it take for you to install from start to end?

  • @dargusto
    @dargusto3 ай бұрын

    I tried my best but, after realizing I had my 90 deg USB connection at the rear (cannot pass it through the grommet space) I had to reverse the rear cable and now I cannot get my A pillar back on. Brand new 2024 Forester Sport. Sigh.

  • @daniel600x1
    @daniel600x13 жыл бұрын

    Great video. Did you have to disconnect the battery before working around the airbags? Just in case.

  • @htxdashcams2127

    @htxdashcams2127

    3 жыл бұрын

    Yes I did. Forgot to show that

  • @ell1142

    @ell1142

    3 жыл бұрын

    @@htxdashcams2127 How do you do that?

  • @linkdesmondtimtrifor

    @linkdesmondtimtrifor

    3 жыл бұрын

    @@ell1142 50 seconds into this video. kzread.info/dash/bejne/dGmAr4-GfMW6mbA.html&ab_channel=MyAirbags

  • @smh0410
    @smh04102 жыл бұрын

    What kind of fuse tap did you use? I can't seem to find one low profile to fit in the box.

  • @mikecooley3361

    @mikecooley3361

    Жыл бұрын

    Autozone sells them

  • @carlitoxbro10
    @carlitoxbro102 жыл бұрын

    Hello , what is the difference between plugging this dash cam this way and plugging in the USB port? Thanks

  • @mikecooley3361

    @mikecooley3361

    Жыл бұрын

    Do you mean the lighter/power port? Wiring the Viofo like he did allows parking mode on the cam when the vehicle is turned off.

  • @KentuckyRanger
    @KentuckyRanger3 жыл бұрын

    I'm sure, but I'll ask anyway... Will this technique work with the 2015 Outback?

  • @htxdashcams2127

    @htxdashcams2127

    3 жыл бұрын

    It is very similar that you can do it

  • @KentuckyRanger

    @KentuckyRanger

    3 жыл бұрын

    @@htxdashcams2127 Installed it today, and it was almost identical. The only thing that was a little different, was the cowling on the rear hatch. While it popped off, it wouldn't completely release from the other parts, but it came down far enough to easily run the wires.

  • @frankocean7755
    @frankocean77553 жыл бұрын

    can u give me a link to your 12V add a fuse? I bought one from amazon but didn’t fit.

  • @dumbelldorkx2568

    @dumbelldorkx2568

    3 жыл бұрын

    It depends on what kind of fuse your fuse box is using. Only way to know is to pull one out from the fuse box. He’s using mini low profile fuse taps.

  • @frankocean7755

    @frankocean7755

    3 жыл бұрын

    @@dumbelldorkx2568 I have the same car and model as his. So I wanted to make sure.

  • @ivantsang2203
    @ivantsang22034 жыл бұрын

    What fuse (amp) and slot # did you use?

  • @adamlipovsky6008
    @adamlipovsky60083 жыл бұрын

    Hi. Looks great. Didn't the rear cam wire mess with side airbags?

  • @RustyBaker22

    @RustyBaker22

    3 жыл бұрын

    I also had this question. I'm doing my 2019 Outback right now and there's a side curtain airbag at each door.

  • @adamlipovsky6008

    @adamlipovsky6008

    3 жыл бұрын

    @@RustyBaker22 I finally routed the cable under the floor near doors bottom. It is harder to made it through rear seats and trunk side but this way it looks to me more safe

  • @jchanznam7270
    @jchanznam72702 жыл бұрын

    Good

  • @amir040481
    @amir0404813 жыл бұрын

    Some of the hardwire kit has only red and black wires, is that ok to use too?

  • @scottseres705

    @scottseres705

    3 жыл бұрын

    Yes that's what my kit had. Black wire is ground, and the red goes to the 7.5 ACC slot, that way the camera shuts off when you turn the car off. I'm actually not sure what the point is of having a third wire go to an 'always on' slot.

  • @mikecooley3361

    @mikecooley3361

    Жыл бұрын

    @@scottseres705 parking mode to record while parked and the vehicle is off.

  • @guoqin8005
    @guoqin80053 жыл бұрын

    Hi do you what size for that fuse?

  • @htxdashcams2127

    @htxdashcams2127

    3 жыл бұрын

    Mini fuse 5 amp

  • @SooperTim
    @SooperTim3 жыл бұрын

    Why isn't there audio

  • @GrappIer
    @GrappIer2 ай бұрын

    Still alive? re-upload this, the audio is goofed

  • @guoqin8005
    @guoqin80053 жыл бұрын

    Hi this is mini or stander or micro?

  • @htxdashcams2127

    @htxdashcams2127

    3 жыл бұрын

    Micro

  • @guoqin8005

    @guoqin8005

    3 жыл бұрын

    HTX Dash Cams thank you

  • @EricAnderson-AKA-Norwedsh
    @EricAnderson-AKA-Norwedsh3 жыл бұрын

    Whish there was audio!

  • @joez800
    @joez8002 жыл бұрын

    nice video. but I can barely hear you :)

  • @tom.hicken
    @tom.hicken Жыл бұрын

    Excludes most crucial part of installation: getting wires around eyesight. Also can't hear a thing :/

  • @JonathanDavisJJ
    @JonathanDavisJJ3 жыл бұрын

    The Subaru Eyesight Manual specifically says not not mount anything on the front windshield between the two cameras

  • @claudebykatz8720

    @claudebykatz8720

    2 жыл бұрын

    I agree. To be safe I mounted mine to the right of the right eye as high as possible on the windshield. The wide angle of the lens seems to capture enough of both sides of the road.

  • @donotchangepassword9695
    @donotchangepassword96952 жыл бұрын

    why can't i hear this?

  • @rajeshr5140
    @rajeshr51403 жыл бұрын

    My dealer said that eyesight functionality will be impacted if the dashcam is placed there

  • @beerker5131
    @beerker5131 Жыл бұрын

    Subaru forester X Brake

  • @TexasEdition
    @TexasEdition3 жыл бұрын

    cant hear you

  • @RMyly
    @RMyly2 жыл бұрын

    Can't hear anything

  • @susanspencer9538
    @susanspencer95384 жыл бұрын

    I can't hear you!!! Please redo this. Please...

  • @bereabeard
    @bereabeard3 жыл бұрын

    I can't hear it. And there's no CC option. VERY disappointing. 🥺

  • @DM235567
    @DM2355672 жыл бұрын

    Thanks for showing the easy parts of the install. How did you get the camera wire past the eye sight cameras?! Worst “how to”ever!

Келесі