Followed your advice on painting flush doors. Really pleased with the results. Great video, thanks.

"I normally put a sheet down but not today as I don't have one"... the way your using that roller, you'd need to mask off the whole room!! Ceiling an' all!!

@entirecosmos4335

4 жыл бұрын

Wtf that looks like a emulsion roller lol. He must have shit load splashes on his face

@paulotheman8734

4 жыл бұрын

well, he said it was faster, he never said it was a perfect job, so kudos to him.

@elsolitarioangelito

4 жыл бұрын

🤣🤣😂

@cosminlichi6789

3 жыл бұрын

You re all crazy.This guy it s a pro.Too good.

@miguelraymond6518

3 жыл бұрын

pro tip: watch series at KaldroStream. Been using them for watching a lot of movies these days.

Just say someone used high gloss on a door that already had a 10 year old gloss paint on it and the old paint started bleeding through, how do you fix this problem? Do you have to sand the interior flat surfaced door until all gloss is off and then use primer first before the fresh coat of high gloss?

Of the door os already glossed, how much do you sand off ?

Good old candleman gonna try that the wkends,can you recommend a good oil based gloss to get a good finish.. And what's the best brush. Hamiltons perfection or purdy Cheers pal

What color is that? Base white paint without added any color or added light color to base white paint?

The smaller sponge roller would be better than a fleece roller even if there made for gloss or any oil based paints as you still get little bits of the fleece come off so sponge is better just lay it off the same way

@BigButtocks967

2 жыл бұрын

Nah oil paint breaks down the sponge and leaves bits in the paint. Can’t beat a good quality fleece roller. But hey each to their own.

Is that paint spots on the floor or buttons ? Do you make your own booze ?

one thing I just wanted to ask you is do I do a second coat of gloss after its dried or is it best to just done coat ?

@wallingtonfilming

3 жыл бұрын

It’s entirely up to you, you can give it five coats of gloss if you want 😂🕯🚬☕️🎅🏻

@daveogmiles6152

3 жыл бұрын

@@wallingtonfilming no its cus I just glossed my doors an frames an just wondered if I just paint strait on top of the first coat after its dried or do I sand it I dont think it would need sanding again

@Sam-gw5pl

Жыл бұрын

@@daveogmiles6152 a light sand to remove any bits of dust stuck to it and to help key the following layer on should help.

Candle man. Really struggle with brush marks in my gloss any tips. Also what are your thoughts on a angled brush for cutting in?? Thanks

@wallingtonfilming

8 жыл бұрын

Try thinning your paint, angle your own brushes

@tjjones2258

6 жыл бұрын

Even better after cutting in with a brush get a mini gloss foam roller and go over the whole door with that the brush marks will not be visible then and it'll leave a brush mark free smooth surface. Thinning the paint will only increase the chance of drips so don't do that unless a miscoat is being applied to bare plaster

Hi Mark - thanks for the videos - very useful and entertaining. Apologies if you have already got a video on this subject but could you go through the best order to decorate a room using emulsion on walls. I have seen conflicting advice on emulsioning the walls before undercoat and gloss or vice versa?

@wallingtonfilming

8 жыл бұрын

Preparation, cup of☕️ emulsion, cup of☕️u/coat, cup of ☕️, gloss job done☕️☕️☕️☕️☕️

Morning sweet cheeks! Is there any last minute glossing planned for this week? 👍👎👍

Hello. I have question what rooler you used to gloss paint . Thanks

@woozijihoon6723

7 жыл бұрын

Pawel Mroczek go

3/4" sleeve Leaves a nice stipple finish

@patrickhemus8102

4 жыл бұрын

Dean Dicrescenzo hahaha i know! Stucco door!

@gort3969

3 жыл бұрын

Doesnt matter the roller if hes tipping it off

Mate you are a pro, great video

why aint the paint flicking all up your arm ....it does with me

why do you choose the long pile roller? I've been using a foam roller for the last 10 years or so. am i missing out?

@wallingtonfilming

7 жыл бұрын

Dan Bennetto Long pile roller puts more paint 🎨 on the door 🚪 hence faster no brainier

@wallingtonfilming

7 жыл бұрын

Dan Bennetto The video tell u why speed

I only use foam roller and purdy brush after. no particles leave .....

Takes me less than 60 seconds to do a door side was it water based paint or oil based 🤔

Thanks..Great video

Brilliant mate 👍

You should have used a 9x3/8 shed resistant roller. Strained the paint. And laid it off from bottom to top in one direction.Also should have used a drop cloth even if it doesnt matter. Paint everywhere and sugarfooting it around is not acceptable.

must be a council house, great video thanks

@MellowCee

6 жыл бұрын

Looks like it

Used to use a 12" Mohair roller and a 4" brush.. Bosh!

Do you get paid for doing this?

mini skuttle?

i use a foam roller,,usually,what type of roller are you using?,,,,thats the way i like to paint doors!...spot on!

@Rachael121

3 жыл бұрын

Thank you for that as Ive just bought some foam rollers & was wondering if they were ok to use for this 👍⭐

Is that water based gloss or oil, the gloss rollers here are made of sponge do dulux do a different one.

@wallingtonfilming

8 жыл бұрын

Oil

@wallingtonfilming

7 жыл бұрын

Peter Miller , oil mate why would anyone us a foam roller they are crap

@wallingtonfilming

7 жыл бұрын

Peter Miller , oil mate why would anyone us a foam roller they are crap

@azarhussain1520

7 жыл бұрын

wallingtonfilming The Candle man

@MrPaulie1234

7 жыл бұрын

when do you second coat a gloss door, ? when it looks transparent first coated ! should I put a Base coat on first? with something else

I use roller sometimes to paint door. Once some idiot kept why use roller that size etc who was even a painter in return told the person who I know stick to your own trade

what about the door edges?

@davidskeeterskeeter1835

6 жыл бұрын

Che Monro keep up dumbo,,he said he did them prior to the video,! 😂😂😂

@gmajorspresents

5 жыл бұрын

You use the door edges to scratch your back. You do those last.

I have been painting for 40 years and this is the type of rubbish I have to put rite all the time no trades person would use a roller like that .this is a demonstration of how not to do it

@johnhunter929

6 жыл бұрын

Lee Gingell ...you need to move with the times mate,there's money to be made out there,it's far quicker and easier to roll the door and lay it up like Wallington demonstrated

@Clan501-Scotland

5 жыл бұрын

Some say it's not possible to rape a door....

@jackesworthy9081

5 жыл бұрын

But the Candle man can !

@perrybailey5565

5 жыл бұрын

I agree, wrong type of roller for a start and not properly laying it off

4 жыл бұрын

@@Clan501-Scotland lol

Paint flying everywhere boii.. bulk overspray

I know everyone is saying he’s rolling too fast etc, but the house looks like a council one, carpet will be going down over splatters, and the paint is oil-based so will settle down to be much smoother before it dries.

@patrickhemus8102

2 жыл бұрын

@67psych3 Ah, the desperate attempt to promote one’s silly British “class”. the statement about it being a council house is not that the council built it. I think council houses are rock solid. The statement is conditional: since it looks like it’s a government-subsidised house, that means that painter isn’t working for a private client who lives in the home, but the local council who pay him to blast out work, so the quality does not need to be the same as a private, residential client-who may or may not live in a council-built home. If it is for a private client, it still stands that carpet will be going down so spray doesn’t matter.

Excellent.

Thank you for sharing your video

Hey men you forgot to mask the floor. Or may the floor going to be painted too in 5 minutes..

Lmao......I guarantee you there is paint splattered on the wall and floor.....velocity is a helluva drug.....slow your roll.....literally

Candle man don’t you supposed to use a short pile roller for glossing? Is that oil/water based gloss? 🕯🚬🍺🍩

@wallingtonfilming

3 жыл бұрын

The shorter the pile the more you have to keep reloading it, Self explanatory and commonsense prevails 🤣🕯☕️🚬

@ertaszorlu4756

3 жыл бұрын

@@wallingtonfilming so what do you use a short pile roller for? What is the advantage, is better for oil based gloss? There must be trade secret other than what you describe as reloading more often... 🕯🍺🚬🧠

Should have protection for the floor down and i would rather use a foam roller. Other then that not too bad

👍👍👍👍👍👍

Well done

Is that waterbase?

@wallingtonfilming

7 жыл бұрын

gezzabell no

@jamiecunningham1565

7 жыл бұрын

wallingtonfilming The Candle man can you do this with water based as I've got 10 flush doors to gloss. More than 1 coat I imagine??

40 year ago did they have rollers 2 do the coalmans homes

Ok,but you need to do the brush stroke all the way ,not stopping and starting in the middle.

Sprayer works a lot better than that duster you tipped that door of f with.

Looks bit heavy pile on the roller sleeve, maybe a shorter pile roller

@wallingtonfilming

7 жыл бұрын

Sandra Clay, no chance gets more paint on the door

You’ve taken your inspiration from the karate kid.

Ah, you do lay it off with a brush. Nice.

does this guy know how to paper hang or is he just a brush hand?

Shame we can’t see the finish with a glancing light , can’t tell if there brush marks.

Wooden floor knackered

omg

Damn he was putting alot of pressure on roller it sounded real rough mate.

I’d be fuming if that was my door pal... may aswell just chucking the tin over the door 😂

Masonary roller on a door!?!? 🙃

Why use such a small roller? A 230 or 270mm would have that done twice as fast

Hi mi God.!!!!!

If you're going to roll it Mohair

JAJAJAJA PAINTING CONTRACTOR OF AMERICA. THAT'S WHY MAKE AMERICA GREAT AGAIN.

I need a roller sleeves like this one that roll so fast and splash paint all over the place

Seen less lines at a railway station

Isn’t the whole point of a roller to eliminate brush marks?😂

@Kennycheeseman

2 жыл бұрын

No, some people want a brush finish.

@achilles2095

2 жыл бұрын

@@Kennycheeseman on a gloss door? Can tell your a handy man not a decorator

@Kennycheeseman

2 жыл бұрын

@@achilles2095 im not a decorator your right but when i used to do refurbes i said to the painter, why you rolling the door then using a brush and he said because the clients want a brush finish 🤷🏼‍♂️

3 mins to do a door, It took me 40 mins and still got 10 more to go. Wonder if this guy could travel to the West highlands and bail me out,

@jarpar3414

3 жыл бұрын

Guessing you just finished the doors mate 👍🏻

what did i just watch here? how can this be titled "how to gloss a door very fast"? if you use a 270mm roller, roll the entire door and then tip off from bottom to top with a nice wide brush u can do it in less then half the time. a door like this shouldnt take more then 10 minutes both sides including cutting in the edges

@damiensmith8351

6 жыл бұрын

Well it's a 3min 33sec video and he's done one side while talking etc. So it would be under 10 mins wouldn't it champ?

Understand why USA is going down...

A blind man could hear the orange peel on that door.

Proper cowboy.

This come up on suggestions and the People commenting about the floor 😂house bashing no floor laid get job don’t quick more money it’s a different ball game to private jobs some people are clueless

Rolls it on then put brush strokes all throught it??? 🤦‍♂️

Voice not clear

trust me ive seen a lot worse... 9 inch roller please next time.

Ruhe!! ist nichts für anfänger Augen

If that is gloss you're applying why are you using a mini emulsion roller, a foam gloss roller should be used, and why on earth did you brush the door after you had already rolled it

@Clan501-Scotland

5 жыл бұрын

I agree foam roller. The brush was used to lay off the paint and prevent orange peel. Lay it on lay it off. That should also be done after a foam roller though.

@lpl1781

5 жыл бұрын

@@Clan501-Scotland You don't have a clue, stop acting like you do

i think you should be called the plot basher

needs subtitals

That job looks completly messy lads. Do you call yourself painter's... sad to see trades men take short cuts

A lot of people must watch this, brim full of confidence, then advertise themselves as "painters" ! I can do better than this - and I'm an electrician !

Jajajaja this lunatic Is to dangeros.

Dodgy painter:))

how can this guy make money he spends more time making video's and giving the wrong advice than he does working

What a joker

Rough as fuck. No wonder you're on sites.

Absolute amateur.

Takes too much time

do this if you want the shit look!😂

Cringe