Yes... I actually said Mini SD card in the video; so beat you too it, lol!

@saltyd2137

3 жыл бұрын

It didn't work for me

@NerdGadget

3 жыл бұрын

@@saltyd2137 Make sure the micro SD card is empty before adding the .bin file.

@smilenownyc

3 жыл бұрын

@@saltyd2137 Try it again and make sure you have the correct version and you renamed to demo.bin It worked on the first try for me. Step by step worked like a charm. thanks @mobile WizTech

OMG, your explanation was way easier than the customer service tech from the wyze company itself. Thank you

@NerdGadget

3 жыл бұрын

You are very welcome. Please help me by sharing, liking, and subscribing.

THANK YOU Moblie WizTech!! You fixed my problem!! Not even the Wyze support team could help me with this and I was ready to send back my camera to them. Your instructions were super easy to follow and you talked at a nice pace (and no annoying background music)...kudos to you. One thing I ran into was I accidentally flipped on the write protection tab on my SD card adapter and it took me a few tries to finally figure out what I did wrong there. But great video, thanks!

@NerdGadget

2 жыл бұрын

Awesome and glad my video helped you. Please help me by subscribing, liking, and sharing too.

I was on the phone with Wyze for over 2 hours trying to fix this problem!! Your 7 minute video fixed it!!!

@NerdGadget

3 жыл бұрын

That's awesome and thank you very much for sharing that. I am glad my video helped you out. Please help me by subscribing, sharing, and liking my video too.

I wish that I had seen this sooner! Wyze customer service couldn’t help me and said that the camera had failed and that my only choice was to replace the camera. Your fix worked perfectly on my V2. Thanks for the instruction.

@NerdGadget

2 жыл бұрын

So happy that worked for you. Please help me by subscribing, sharing, and liking too.

A little disappointed that i threw two cameras out before i found this video but lucky still had another two laying around.The fix worked and all due to the simplicity of the explanation. Thank you so much for the information as it saved me from spending good money over bad..SUBSCRIBED!

@NerdGadget

3 жыл бұрын

I truly appreciate it and glad to help! Please share and like as well.

If I could give you more than one like, I would. Thanks a bunch, saved me from buying a replacement.

Thank you SOOOO much!!! I thought I was going to have to buy a new camera as other videos did not help me fix it. Luckily I came upon yours. It fixed it!!! You have a new subscriber and a very happy person right now. lol THANKS :)

@NerdGadget

3 жыл бұрын

That's awesome and glad to help you out. Also thank you for subscribing too. Please help me share and hit the like button if you have not already.

That worked! Thanks for posting. I was about to throw the Wyze Cam Pan away after reading the support available from Wyze. You rock!

@NerdGadget

2 жыл бұрын

Glad my video helped put. Please help Mr by subscribing liking, and sharing too.

OMG! Thank you soo much. I did exactly as you said and it took a few minutes and I was like...ugh it didn't work. Then it kicked in and we are back online. Great video.

@NerdGadget

2 жыл бұрын

So glad it worked for you. Please help me by subscribing, likinkg, and sharing as well.

Thank you for making the video. Worked like a charm for me.

@NerdGadget

4 жыл бұрын

You are very welcome and glad to help. Please help me by sharing this video, hitting like, and subscribing too. Hit that notification bell too if you don't mind. Thank you

Very good explanation, my cam v2 was offline for a long, but now it's back online. Thanks. My camera went thru red/blue blinking and straight to solid blue and had a hiccup during reconnecting, no voice prompt for -ready to connect- but finally it did connect on rebooting.

@NerdGadget

2 жыл бұрын

That's awesome that it started working and glad video helped you out. Please help me by subscribing, sharing, and liking too.

I have been trying to figure this out for weeks now. Thank you

@NerdGadget

3 жыл бұрын

You are surely welcome. Please help me by sharing this, hitting like, and subscribing too.

Had to dust off my old laptop but it worked like a charm. Thanks a bunch for the easy step by step instructions.

@NerdGadget

3 жыл бұрын

You are very welcome. Please help me by sharing, liking and subscribing too.

i bought this cam used (open box) and i could not get it connected. It turned on and eventually just died "bricked" with yellow light. I watched this video and it was right to the T.. I was able to get my cam running with no issues! Vey happy to have done this. I ware really regreting and resenting that i saved a few dollars on the camera buying it open box. FIXED and operational. Subscribed! great vid.

@NerdGadget

3 жыл бұрын

Glad my video helped you get your cam work! Thanks for the sub as well!

Great tutorial altogether... Thanks mate, you saved my cam (it's been frozen for at least a year, maybe more... Decided to give one more try by searching on youtube and found your help!)

@NerdGadget

2 жыл бұрын

You are welcome and glad my video helped. Please help me by subscribing , liking, and sharing too.

This is what KZread is all about. Excellent Information. Thank You so much for Sharing Bro.

@NerdGadget

3 жыл бұрын

You are very welcome and thank you for the positive comment. ease help me by sharing, liking and subscribing too.

After inserting the card, I had to try unplugging/plugging and pressing the setup button several times, but it eventually worked. Thanks!!

@NerdGadget

2 жыл бұрын

You are welcome. Please share, like, and subscribe too.

What a great tutorial, thank you for that!

@NerdGadget

3 жыл бұрын

You are very welcome, please help me by hitting like, share, and subscribe too!

Thanks. This was helpful. I had to format the SD card using disk utility on Mac. Just deleting all the files in the drive didn't work.

worked like a charm, ty

thanks so much this helped me tremendously! liked and subbed.

@NerdGadget

3 жыл бұрын

Thank you very much and please share as well!

You’re a good man! This worked for me brother! Thank you!!!!

@NerdGadget

3 жыл бұрын

You are very welcome and glad it helped. Please help me by sharing, liking, and subscribing too!

Worked like a charm. Thank you!

@NerdGadget

3 жыл бұрын

Awesome... please help me by sharing, liking, and subscribing too!

worked for me. other videos said to use an older firmware but this one said to use the most current firmware for the camera and it finally worked

@NerdGadget

2 жыл бұрын

So glad my ideo helped you . Please help me by subscribing, sharing, and liking as well.

Fixed my V2! Much appreciated! 🙏🏼

@NerdGadget

3 жыл бұрын

You are very welcome. Please subscribe, share, and like too.

thank you so much ! your explanation was very helpful !!!!!

@NerdGadget

3 жыл бұрын

You are very welcome. Please help me by sharing, liking, and subscribing too.

worked like a charm!! Thanks for this!!

@NerdGadget

3 жыл бұрын

You are very welcome. Please help be by liking, sharing and subscribing too.

This worked on my wyze cam v2, thanks!

@NerdGadget

3 жыл бұрын

You are very welcome and glad it worked. Please help me by sharing, liking and subscribing too!

Outstanding video of a solution, great work around and technical expertise on the subject, live long and prosper 🖖

@NerdGadget

2 жыл бұрын

So glad my video helped you. Please help me by subscribing, liking, and sharing too.

Thank you very much. It worked for me. Save me from buying another Wyze Pan Cam. Very good video.

@NerdGadget

3 жыл бұрын

You are very welcome. Please help me by subscribing, like, and share video too.

So I bought a new Cam Pan 2 and it’s had a solid red light since opening the box. Will this fox that issue?

the best video explaining how to fix the issue. Thank You!!!

@NerdGadget

2 жыл бұрын

So glad my video helped you out. Please help.me by subscribing, sharing, and liking too.

ok 8th time was the charm, working like new now. Thank you

Had this happen and wyze sent me a new one and then it happened to the new one so got a micro on the way for 8$ and once it arrives I'll have 2 working cameras. Thank you.

Worked like a charm... Once setup of the update remove the SD card to continue camera setup, thanks brother...

@NerdGadget

3 жыл бұрын

You are very welcome. Please help me by sharing liking, and subscribing too.

You are amazing! Thank you for saving my sanity.

@NerdGadget

3 жыл бұрын

Please help me by sharing, liking, and subscribing as well!

Thanks for the tip will try it tonight. 👍

@NerdGadget

Жыл бұрын

I hope it works for you! Please help me by subscribing, liking, and sharing as well.

Awesome video man... thanks, fixed me right up.

@NerdGadget

2 жыл бұрын

So glad my video help you out. Please hrlp me by sharing, liking, and sharing as well.

Wyze pan got bricked after a huge lightning storm. Turns out the card that was in it got fried, got a new card, and followed your instructions. Thanks for the fix, SAVED!

@NerdGadget

3 жыл бұрын

You are very welcome. Please help me by sharing, liking, and subscribing too.

@dougmehnert4727

2 жыл бұрын

Did you just disassemble the body of the camera to access the internal card? Was that another microsd card? I'm having a similar issue where this solution isn't helping me and i wonder if the internal card is toast. @omgedson

@omgedson42

2 жыл бұрын

@@dougmehnert4727 nope, just the common card that you pop into the slot. Confirmed it was fried, not even my computer was able to read it.

Super helpful thank you!

@NerdGadget

2 жыл бұрын

You are very welcome. Please help me by subscribing, liking, and sharing as well.

Thanks...sooo much for this tutorial. My light was constant yellow and I was totally perplexed. You are my HERO...thanks Now my cam is programmed and I have security 😂

@NerdGadget

Жыл бұрын

That is so awesome, and I'm glad my video helped you out. Please help me by subscribing, liking, and sharing as well.

Dude...your voice is incredible!

@NerdGadget

3 жыл бұрын

Very much appreciated!

I have a pan that’s has this issue. Could I use an sd card from a different pan that hasn’t been set up yet?

I had to repeat the process twice, but it worked! One I got the blue/yellow blinking lights I pressed the rest button and went through the add a cam pan process but it kept telling me it couldn't find my network. But after a few times cancelling and going through that process suddenly it says setup completed. It doesn't have to make sense if it works! And it working perfectly again. Thank you! And I did click Like.

@NerdGadget

3 жыл бұрын

You are welcome. Please help me by sharing, liking, and subscribing too.

Still got the solid yellow on my cam pan..have not been able to get this fix to work yet..!WAIT! I TRIED A 1GIG CARD BRAND NEW AND IT WORKS! THANK YOU!

@NerdGadget

2 жыл бұрын

You are welcome. Please help me by subscribing, sharing, and liking.

This worked for me!!! THANKS!

@NerdGadget

3 жыл бұрын

Awesome,; please help me by sharing, liking, and subscribing too.

God Bless, actually worked thank you so much!!!!

@NerdGadget

3 жыл бұрын

Thank you very much. Please share, like, and subscribe too!

Thanks this helped!

@NerdGadget

3 жыл бұрын

You are very welcome. Please help me by hitting like, share, and subscribe.

THANK YOU! The documentation on Wyze's website does not include renaming the .bin file. You just saved my device! :)

@NerdGadget

Жыл бұрын

So glad my video helped you out. Please help me by subscribing sharing, and liking as well.

@tgiordano

Жыл бұрын

@@NerdGadget Done!

@NerdGadget

Жыл бұрын

@@tgiordano Thanknyou very much.

Worked like a charm, much apreesh

@NerdGadget

3 жыл бұрын

You are very welcome. Please make sure to hit like, share, and subscribe too.

Thank you very much. It help fix my cam 100%.

@NerdGadget

3 жыл бұрын

You are very welcome! Please help me by subscribing, liking the video, and sharing as well!

How long are you supposed to hold the button? mine still is solid yellow

Thanks man totally worked

@NerdGadget

3 жыл бұрын

You're very welcome. Please make sure to share, like, and subscribe too!

you are smart you fixed my issue and my camera is working now thank you so much

@NerdGadget

2 жыл бұрын

You are very welcome and glad to help. Please help me by subscribing, liking, and sharing as well.

I also use 4.10.6.218 November 2020 version should I use a different version

Thank you ☺️

@NerdGadget

3 жыл бұрын

Ypu are welcome. Please help me by sharing, liking and subscribing too.

Thanks worked at the First Attempt

@NerdGadget

3 жыл бұрын

Great. Please help me by sharing, liking, and subscribing too.

Hi. Tried it. Got to the blue and yellow light but then it returned to the steady yellow light 😞

how do you like them? seems affordable yet functional!

@NerdGadget

4 жыл бұрын

Love them! Yes very affordable, reliable, awesome quality, features too!

thank u!

Thanks this fixed mine

@NerdGadget

3 жыл бұрын

Awesome! Please help me by sharing, liking, and subscribing too!

Awesome, thank you so much it worked 100%

@NerdGadget

18 күн бұрын

@@HughSchsllies I am so glad my video helped you. Please help me by subscribing, liking, and sharing as well.

you are THE BEST THANKS

@NerdGadget

2 жыл бұрын

So glad it worked for you. Please help me by subscribing, liking, and sharing as well.

Unfortunately this didnt work for me :( How long did you have to press reset for? I never get anything other than a solid yellow.. :( I tried doing with the last two firmware updates but nothing here. Any further advice appreciated. Liked video as it certainly gave me something to try. Thanks!

@NerdGadget

3 жыл бұрын

You press it for about 10 seconds or so... you should get those lights. Also make sure you start with the cam unplugged, press and hold the button, and the plug it in while still holding until both lights are flashing.

Any other recommendations to get the camera to connect. I received it today brand new and a new SD card. I’ve tried all the steps you provided and it still will not connect.

@NerdGadget

3 жыл бұрын

Try doing all the steps again and ensure nothing is on the micro SD card but the .bin file. Once you see blue and yellow lights turn off... give it a few minutes or so. If it still not connecting... do a factory reset by by pressing the "Setup" button until you hear the voice prompt for setup. Then just set it up again.

I have the latest firmware already do I still need to do this? I'm getting error 90 and solid yellow light I've tried to unplug and repower on and it's not working 😢

@NerdGadget

3 жыл бұрын

Yes, you still have to in order to unbrick it.

This vídeo safe me so much...

@NerdGadget

3 жыл бұрын

That's awesome!!! Please help me by sharing, liking, and subscribing too.

Can I do it from the computer directly?

Thanks this solve my cam

@NerdGadget

Жыл бұрын

Awesome, and glad my video helped you out. Please help me by subscribing, sharing, and liking as well.

Connection failed fixed. Thought I need to buy a new one. You save me $38. Thank you.

@NerdGadget

3 жыл бұрын

Please help me by sharing, liking, and subscribing too!

wyze should hired you you underdtand more than they do god bless you

@NerdGadget

2 жыл бұрын

I truly appreciate that and I'm glad that worked for you as well. Please help me by subscribing, liking, and sharing too.

It did not work for me unfortunately. The cam started with a solid yellow, and once have installed the firmware on the SD card, and following the steps, the cam turned on, and had a solid blue/yellow color. Left it sit for a while, and no changes. Any advice?

@NerdGadget

3 жыл бұрын

You were halfway there. I would try to go through the steps once again and see if that works. Also make sure nothing is but that file is on the Micro SD card. Also please make sure to rename the file just as mentioned in my video.

@scottborn6837

2 жыл бұрын

That is what happened to one of mine. Three worked with this, one just sat on blue/yellow. I tried many times.

Amazing

@NerdGadget

2 жыл бұрын

Please help me by subscribing, liking, and sharing.

So you have to get a blank micro SD card before you start this I take it?

@NerdGadget

3 жыл бұрын

Yes or use your existing one by temporaryly removing the content off of it.

Ty.. worked.

@NerdGadget

3 жыл бұрын

Awesome! Please help me by sharing, liking, and subscribing too.

I was about to trash this camera. Thanks for the info.

@NerdGadget

2 жыл бұрын

So glad my video saved your camera. Please help me by subscribing, sharing, and liking as well.

how long do you have to hold it down?

@NerdGadget

Жыл бұрын

For like 5 second or until you see the light flashing.

Wyze support is a joke. They told me there was no hope for my camera, and to buy a new one. This fixed mine.

@NerdGadget

2 жыл бұрын

So glad this fixed your issue and you were ae to follow the steps asxwell. Please help me by subscribing, liking, and sharing too.

I almost got it to work, but camera can't connect to the wi-fi , took a break but when i tried it again it was back to the way it was ... just the solid yellow?

@NerdGadget

3 жыл бұрын

Try doing it again and wait for the light to turn off. Once it turns off, give it a few minutes, then just do a factory reset by holding done the setup button until it says ready to pair. Then set it up again.

@migzsanmiguel

3 жыл бұрын

@@NerdGadget Will give it a try, so no need to re do the sd card?

@NerdGadget

3 жыл бұрын

@@migzsanmiguel I would check to make sure nothing but but the .bin file is on the card and the go through the whole process again. Then once the blue and yellow light turn off... do a factory reset.

@migzsanmiguel

3 жыл бұрын

@@NerdGadget Patience is the key! It finally connected! Thanks a bunch Bro!

@NerdGadget

3 жыл бұрын

@@migzsanmiguel You are surely welcome and glad it worked for you. Please help me by sharing, liking, and subscribing too!

Did what you said. Still Solid Yellow Light.

@mschroeder9556

Жыл бұрын

Me to.

@christianilles359

Жыл бұрын

@@mschroeder9556 me 3\

No yellow light still :(( also can i use my data or do i needwifi home??

@NerdGadget

2 жыл бұрын

Make sure the Micro SD card only has the file in it and nothing else. Regrading the network, I believe its going to be home Wi-Fi only but not sure.

awesome video, i followed everything to a t, proper file and rename.. no luck.. i will try with a smallwe sd i used 256 gb card. Either way.. Still not working. They stopped working after i did the firmware update

@NerdGadget

2 ай бұрын

Try letting it stay powered off for a few hours and the try again.

Hey Bruh, your hands look superb. You should definitely consider being a hand model. Peace

@NerdGadget

2 жыл бұрын

I never knew that hand models was a thing but truly appreciate your possitive comment!

So I did all this and got the blinking yellow and blue light but my camera isn't reseting?? What should I do?

@NerdGadget

3 жыл бұрын

Please make sure that the micro sd card only has the downloaded file and that you renamed that bin file correctly.

@shawnhemmingsen9515

3 жыл бұрын

@@NerdGadget damn i missed that, going to try that now. I truly appreciate the help🙏🏾🙇🏾‍♂️

@NerdGadget

3 жыл бұрын

@@shawnhemmingsen9515 You are very welcome. Please make sure to share, like, and subscribe too!

I have a doubt regarding this...can we use 8gb micro-sd card or 32gb is recommended

@NerdGadget

3 жыл бұрын

You can use an 8GB card as the file is very small. There is no need to doubt as you can see from the comments... including myself that it works.

@prathikh9194

3 жыл бұрын

@@NerdGadget Thank you ...if i have any doubts i will talk.

Im at my witts end 😅 I have tried 4 different firmwares on my wyze cam v2 and I do the process step by step and it goes to the light blue light for like a minute and then straigh back to solid yellow/orange. I don't know what else to do 😓

@Atypicalkid88

3 ай бұрын

I have tried different cables, different bricks, different firmwares and formating the microsd card onto fat32. Sigh maybe it's time to buy another one? 😢

@NerdGadget

3 ай бұрын

@Atypicalkid88 This has happened to me before as well. Try and let the cam stay powered off for about 5 to ten minutes and then try again.

Hi, still solid yellow.. Not working pls advise..

@NerdGadget

3 жыл бұрын

Please make sure your Micro SD card gas nothing but that renamed .bin file in it and then try the steps again.

I tried it a few times, and it did not work. The light went from solid yellow, to now blinking yellow. I also have the Pan version and wasn't sure if it was the v2 or not so I tried to download both on the mini SD card and try each one separately, but still no luck. Any ideas?

@NerdGadget

Жыл бұрын

Make sure that the Micro SD card does not have anything but the .bin file on it before you start.

@kelseydelanoy778

Жыл бұрын

@@NerdGadget Yes, I made sure to clear the card so it was empty. And I deleted all text so it was just demo.bin. I am wondering if I need to try to reconnect it to my Wifi? When i hold down the button, I am not getting any blue light.

@NerdGadget

Жыл бұрын

@@kelseydelanoy778 Havd you tried holding down the button a little longer.

@kelseydelanoy778

Жыл бұрын

@@NerdGadget When I hold it longer, the voice comes on saying "ready to connect"

Can you add more then 32GB?

@NerdGadget

2 жыл бұрын

I believe 32GB is the max for Pan V2, but could be wrong there.

👍🏾

Great, thanks!

@NerdGadget

3 жыл бұрын

You are very welcome. Please help me by sharing, liking and subscribing too.

I used this today on a Wyze Cam Pan that was bricked out of the box. After I called for a warranty replacement they said they didn't want the camera back so I was like "Well, if I can't get it to work its already broke." The replacement comes in a couple days and the first camera is now working

@NerdGadget

3 жыл бұрын

Awesome... that actually happened to me as well! Please help me by sharing, liking, and subscribing too.

can i use a USB stick instead of a micro sd card?

@NerdGadget

Жыл бұрын

No, it has to be a MicroSD card.

The app prompted me to do a firmware update and 2 out of my 3 cameras are now bricked. I’m not sure if I’m doing something wrong but this trick isn’t working for me. The blue light comes on, followed by the yellow light and nothing happens from there.

@NerdGadget

Жыл бұрын

Are you adding the file to the Micro SD card while it is empty. If not, backup the Micro SD card, make there is nothing on the card, go through the steps, and then see if that works. If so, you can then add the files back on the card afterward.

I’ve tried to force reset, tried flashing the firmware. Has done nothing. I’m thinking that the reset button is broken

@NerdGadget

2 жыл бұрын

Make sure you are pressing the tiny button.

Didn't work for me. I formated the sd card, downloaded pan cam firmware, rename it (demo.bin), put it in camera, power, held setup, it turns to blue/yellow light and then just stays there even after leaving it for hours. Multiple tries, different sd cards, still the same. Any ideas?

@NerdGadget

2 жыл бұрын

After going through the steps again... let it blink for few minutes... unplug it for 10 seconds and then try accessing it from the app.

@uzairsaqlain

2 жыл бұрын

@@NerdGadget It never blinks. stays solid blue/yellow

@NerdGadget

2 жыл бұрын

@Uzair Saqlain Ok see what happens after letting it sit for a few and the power off for 10 seconds and then back on.

My Cam Pan appears to be completely bricked. I have followed all steps, multiple times and I get as close as a solid yellow/blue light after a short time the blue will go out and it stay a solid yellow.

@NerdGadget

3 жыл бұрын

Please make sure your micro SD card was empty before adding the file.

@TheToddstrite

3 жыл бұрын

@@NerdGadget I have multiple brand sd cards, formatted and I even broke out a brand new unused card.

@yoelnoya

3 жыл бұрын

@@TheToddstrite the same is happening to me... :(

@TheToddstrite

3 жыл бұрын

@@yoelnoyaSorry, Good Luck

@uzairsaqlain

2 жыл бұрын

Exact same thing happening to me, stays at blue/yellow light

Hi, worked... but I had the same issue again, and went through the whole process, I have a blue light and good signal strength but but I get a "disconnected from wifi" error. Not worth the effort

@NerdGadget

2 жыл бұрын

You know may need to just do a plan factory wipe on it now since it is no longer bricked.

How do you "unzip" the file? I must be special. Also, I can't change the name 🤷🏼‍♀️... help 😫

@NerdGadget

3 жыл бұрын

You can open the zipped folder and then drag the file out of it. Once you move it out, You can right click file, click Properties, and the you will see were to rename it... just as I did in the video.