HOW TO GET THE PERFECT TENSION ON YOUR BROTHER SE600 MACHINE
Ойын-сауық
Materials Used:
🚩AFFILIATE LINKS🚩
_______________________________
BROTHER SE600 SEWING/EMBROIDERY MACHINE amzn.to/3o5h9Y3
EMBROIDERY THREAD amzn.to/3iFCUN5
THREAD HOLDER amzn.to/2XZvBGH
🚩🚩 As An Amazon Affiliate I Will Receive A Small Commission On Qualifying Purchases (At No Cost To You) 😩
_______________________________________
3. Fabric-Hobby Lobby
In This Tutorial I’ll Be Showing You How To Do A Tension Check On Your Sewing/Embroidery Machine. After You Watch My Video You Should Be Able To Find The Tension That’s Perfect For Your Machine. The Machine I Used In This Video Was My Brother SE600, For Sewing & Embroidery😍
Would You Like To Donate To My Channel🌹 CashApp-$ChellesWayFam
CONNECT WITH ME ON INSTAGRAM chelles.way...
#BrotherSE600 #EmbroideryMachine #TensionCheck
Пікірлер: 52
This was the most helpful video ever, so thorough & well taught - really understood everything by the way you beautifully explained & carried me thru the logic ❤ 🇺🇸
Thanks for this video, it really helped me to get my machine working properly
5 is the winner! And Ty for showing me how to do this test myself!
this is such a good idea! thank you for sharing this
I want to thank you so much for coming out with this video because I’ve been having problems with my machine will be getting tangled in the bottom inches scrunching up at the top I’ve ripped a lot of new shirts it’s a learning progress and I think that’s a perfect idea to have a tension test Which I’m going to do now thank you again
@chellesway2270
2 жыл бұрын
Any Time🙏🏾
Thank you so much!! I thought I needed MORE tension, but I really needed less!! I have my tension at 1! I was so surprised😅
@chellesway2270
4 ай бұрын
You're so very welcome 🤗 Glad I could help!!
This was very helpful for me
Very helpful!
Great tutorial, thank you!
@chellesway2270
2 жыл бұрын
Thanks for watching 😘
This was super helpful! Thanks so much!!
@chellesway2270
10 ай бұрын
Glad I could help✨ Thanks for watching ‼️
Thank you so much!!
Very Helpful info
@chellesway2270
3 жыл бұрын
Thanks For Watching ❣️
PSA: Brother machines are notorious for ignoring your tension settings if the bobbin isn't set "just right"... I noticed everything on lettering was real good for a moment, ran outta thread and put new ones (bobbin included). The bottom thread started appearing on top. I fought with the machine for a few hours... turns out, taking the bobbin out and redoing it (tugging on the thread before putting it through the little cutter) was enough to get it working again. Just to test it, I rethreaded the bobbin once more (without tugging) and it was messy again... did the little tug before cutting, and it worked. I have the se600, i consider it a garbage quality machine. I've at least made enough in product to cover the cost. Will be throwing it in the trash one of these days and hopefully get a Viking -_-
Hi and thanks for posting this. I usually do a similar check when straight or zigzag sewing. I didn't realize this technique existed. I enjoyed your teaching process, you seem to be a natural.
The random one or the perfect one is 4 or 4.5 And each tension has a use for exemple the 9 you use it on denim If u do 4 on denim the motifs will be ugly and not good so its depends on what you te using
@chellesway2270
3 жыл бұрын
Thanks For That Info❤️
Can you do a video on the +- button ?
Thanks For Tuning In C.Way Fam🌹 Which Tension Did You Choose? Be sure to Follow on All social platforms 🌹Instagram instagram.com/chelles.way/?next=%2F 🌹TikTok www.tiktok.com/@chelles.way?_t=8ZUi1WHpvdS&_r=1
6 is best
5.5
a lil off topic, but is the carriage supposed to have slight wobble? example, if you find the little rubber wheel at the end of the carriage arm where it rolls on the surface of the carriage unit, are you able to slightly lift? or is it supposed to be completely stiff?
@chellesway2270
2 жыл бұрын
Mine Is A Little Stiff, But It Could Depend On How Often You Use Your Machine.
I like 5
I have a Brother Disney machine and have trouble stitching the letter L it does fine on the long side but loops on the bottom of the L any advice?
@chellesway2270
2 ай бұрын
Hey Nancy 👋🏾 there could be a number of reasons. Check your needle & make sure it is not damaged. You can try different tension settings. Also check your top threading and bobbin threading, make sure they are correct 🫶🏾 Let me know if this was helpful.
hey ! So are you just showing how each number tension is ?
@chellesway2270
3 жыл бұрын
Yes That’s Correct! This Is Just A Technique You Can Use To See Which Tension Is Best For The Fabric You Are Using.
I like 6
Hi I've been having problems lately with my brother se600....it would be doing my embroidery pattern nice but them when it get to a particular area the needle sink into the fabric and start to stich under the fabric then when you stop and remove the hoop all the thread is bundle up between the metal plate....what's the problem there?
@chellesway2270
3 жыл бұрын
Sounds Like Your Tension May Be Off (As In Loose) On Top and/or Bottom You Have To Readjust Your Tension Every So Often Depending On The Material You Are Using.
@onezshul
2 жыл бұрын
Your backing paper is too weak. For the brother se 600 try using mid to heavy weight tear away stabilizer
@thecomorbiditycurator8018
Жыл бұрын
@@onezshul On a SE625, I use a mid weight tear away and every single tension setting does the bunching under the plate. I've tries different weight fabrics, different thread count fabrics, different stabilizers, changing my needle, different weight thread, iron on stab, adhesive spray, pinning. nothing works.
@JoseFernandez-kk9zn
Жыл бұрын
@@thecomorbiditycurator8018 hey I have the same problem by any chance have you gotten it right by now ?
@francdesbons560
Жыл бұрын
@@thecomorbiditycurator8018 I had that problem but solved it. I solved it by adjusting the bobbin thread. I saw a video on KZread, and the guy shows a unique way of knowing (testing) if your tension on the bobbin is at its proper setting. He taped 5 quarters wrapped in a small piece of scotch tape, attached the tape to the bobbin's bottom (closed end). Then grab hold of the bobbin thread while letting the bobbin swing (hanging) freely. If the bobbin lowers quickly your tension on bobbin is too loose, if the bobbin doesn't move or if it moves downward too slowly or it doesn't lower down at all, your bobbin tension is too tight. TO ADJUST BOBBIN TENSION > to adj. the bobbin thread (I'm referring to Brothers SE-600 & Brothers PE-800) METAL BOBBIN-CASE! there is a tiny flathead screw with-a-slit for a tiny flathead screwdriver (I used an eye-glasses screwdriver). In order to TIGHTEN the bobbin tension, turn that screw CLOCKWISE 1/4 turn (some folk turn 1/2). Think of this simply as CLOCKWISE-TIGHTENS/ COUNTER-CLOCKWISE LOOSENS. Now that you've turned 1/4 turn to tighten, pause. I say pause because now is a good time to rerun the same bobbin tension test as mentioned above. It should drop slowly. For a bobbin that drops too quickly that means it's too loose. So, turn screw 1/4 turn COUNTER-CLOCKWISE (loosens) then as I stated this a good time to rerun the same bobbin tension test as mentioned above. There is another bobbin test on KZread called "Bobbin Tension Drop Test". Hope this helped.
Great Video! Can it sew Leather?
@chellesway2270
Жыл бұрын
Thank you💕 It may, depending on the thickness. Honestly, In my opinion I would avoid it on this type of sewing machine.
@Fredhobby
Жыл бұрын
@@chellesway2270 thanks for the reply ❤️ so maybe the singer 6800c heavy duty will work better on leather? Thanks again
From a novice I’d pick 5
@chellesway2270
2 жыл бұрын
Gr8 Choice!!
why would the back of my piece look like half and half top thread and half bobbin thread?
@chellesway2270
3 жыл бұрын
It Could Be Your Tension
The material used and stabilizer? Is it different for tshirt material?
@chellesway2270
2 жыл бұрын
I believe this was just a piece of satin I had cut and the stab is from Amazon the link should be in the bio
I like 0 its pretty on both sides
456
My Like is no 300