How To Get The PERFECT Miter Angle On Baseboard EVERY TIME! Tool Every DIYer NEEDS!
Тәжірибелік нұсқаулар және стиль
ITEMS I USED ON THIS VIDEO:
- Miter Protractor (SAKER) - amzn.to/3P2Vmz3
- Miter Protractor (LEXIVON) - amzn.to/3FoTD2r
- Baseboard Super Glue With Activator - amzn.to/3P5IeJg
- 2P-10 Super Glue - amzn.to/3MXGYpM
- Miter Saw - amzn.to/3vRgpwV
SHOP MY ONLINE AMAZON STORE AND CHECK OUT ALL THE TOOLS I USE! www.amazon.com/shop/genevo9
On this episode I'm going to show you How To Get The PERFECT Miter Angle On Baseboard EVERY TIME! You’ll get that flush Professional fit every time! This works with crown mouldings too! This tool every DIYer NEEDS!
DO YOU HAVE QUESTIONS ON YOUR HOME REPAIR OR DIY PROJECT? GET TIPS, ADVICE AND ANSWERS! BECOME A FIX THIS HOUSE MEMBER!
Become a FIX THIS HOUSE Member by clicking on this link: / fixthishouse
Please Subscribe To Our Channel! / fixthishouse
FOR BUSINESS INQUIRES SEND TO:
FIX THIS HOUSE
P.O. BOX 2511
BREMERTON, WA 98310
UNITED STATES
FOR BUSINESS INQUIRES EMAIL ME AT:
fixthishouse1@yahoo.com
DISCLAIMER:
Videos produced by Fix This House are provided for informational, educational and entertainment purposes only. Please use SAFETY precautions when following the tutorials on these videos. Viewers doing projects at their own home are doing it at their own risk and Fix This House cannot be held liable if they cause damage to their homes or injury. Fix This House cannot claim liability with all applicable laws, rules, codes and regulations for a project. Always stay informed of your local building codes! Happy and SAFE renovating!
DISCLAIMER: This video contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.
#Baseboard #Miters #Crownmoulding
Пікірлер: 216
I am about to do this in hallway, love how easy you make it. Gonna go buy the tool asap before project . Thank you
@FixThisHouse
2 жыл бұрын
I’m glad I could be of help! 🙏🏽😊
@lzs19860610
Жыл бұрын
Great video
@ryannewton1511
Жыл бұрын
@@lzs19860610 l
A pro tip I learned years ago, if you add +0.5-+1 degree to your outside cuts and -0.5-1on inside cuts, this will allow the points to meet first and with some pressure, they'll flex into a perfectly flush fit. You will also want to calibrate your mitre saw's mitre gauge using that protractor as your reference since most saws aren't perfectly calibrated/square either. Always best to stick to one measuring tool unless you're dealing with precision instruments
@matthewstrange3778
Жыл бұрын
That's ok with timber, MDF is a completely different story 😜
I am doing my baseboards for the first time this summer and this tool will help greatly! thank you!
Thanks man for making this video I just came across your page, as I'm 1st year Carpenter apprentice in high rise and its been a challenge with these miter cuts, I will look into the tools that you mentioned. Have a great one!
You are the bomb my friend! Easy to follow instructions. Crystal clear. You make it so easy
One of the best videos I've ever watched. Very practical, good explanation. Thanks.
Awesome tool. Thanks for showcasing it.
Just finished a project and needed this tool. Thank you for the excellent video(s) as it is most helpful.
This is a grate product and makes your job alot easier, I truly appreciate your videos they are great and very helpful,thank you so much you are a excellent teacher.
Awesome video, easy to understand, clear and to the point.
Thank you for explaining very well
Looks great and I love the Saker miter gauge too as it would make cutting miters so much easier!👍
Awesome video. Thank you for your time spend on explaining this awesome tool
Awesome instructions! Thank you... Now, I'm ready to install my baseboards.
You are an amazing teacher! Keep it coming...
This is beautiful the way you use that tool to get an accurate inside and outside cut, and thanks for demonstrating and sharing how to use this tool.
@FixThisHouse
2 жыл бұрын
Thank you so much for the feedback! 🙏🏽😊
This was a great explanation…I am putting in new baseboards and will follow this.
Excellent video. Very helpful.
Thanks .. looks easy with the right tool
Thanks, this has been of great assistance
Thank you, Sir, for the lesson!!
Thanks for the video!
Extremely helpful!
Amazing! I wish I watched your video before I struggled with molding miter cuts, got disgusted and started caulking the open seams! I’m getting this tool!
Yeah, I always overlook that particular scale. It does make it easier.
Thanks. I love your clear tips to make DIY easier for us.
@FixThisHouse
2 жыл бұрын
Thank you so much! 🙏🏽😊
Great Channel thanks for all the great tips👍👍
Excellent video! You put instructions In laymen terms, easy to understand with excellent results. Cheers.
@FixThisHouse
Жыл бұрын
Thank you Jonathan for the feedback! Means a lot! 🙏🏽😊👍🏽
Thanks that was awesome info, God Bless!
Thank you very usefull tools
Thanks, this makes it easier for a beginner Diy'er like myself.👍🇺🇸🙏👌
Great video. 🙌🏻
My friend this is good job you did .
best video on this product.. you show how we all assume 90' and how off they are... then try to tweak and waste boards. great vid on how to use!
I just shared on my fb, post too , I read about that miter protractor it’s got great reviews and high quality aluminum with engraved writings so they stay on to read. Thanks for this great detailed video on moulding
Great video man!
I like the storage shelves you had behind you in the garage at the end.
Awesome review man
Ez breeze explanation! wow simple. I've watched tons of videos and nobody nailed it like you did. THANKX!
@FixThisHouse
Жыл бұрын
Thank you so much Rick! Means a lot! 🙏🏽😊
Got the lexivon one, really great for any angle measurement work.
Fantastic video. Thanks for posting.
@FixThisHouse
Жыл бұрын
Thank you too!
Great job brother!!! 💪👍🙂
The carpenter God put your video in my feed 🙌🏾🙌🏾🙌🏾🙌🏾🙌🏾!
Awesome.
Well done
Thank you
Perfect!
Quick little pro tip for ya. I like what I see just if you are using the saw for a lot of cuts try to not flip the baseboard to the back side. Doing this can chip out the outter spot of the baseboard. Instead flip it upside down.
@206Nish
Жыл бұрын
My miter only goes to 45, how am I supposed to do the cuts when the tool says 49?
@Grunttamer
Жыл бұрын
@@206Nish what i would do is cut a piece of wood to like 10 then put that against the fence and then put the board against that and cut it at 39 indicated. if you put the piece in the right spot on the fence you should have your angle.
@206Nish
Жыл бұрын
@@Grunttamer thanks, I just watched a video where a guy does exactly that
@FreePal23
Жыл бұрын
@@206Nishcan your the link please
Great video!! Thanks so much.
@FixThisHouse
2 жыл бұрын
Thank you for watching! 🙏🏽😊
Great video, great tool ...
Excellent video! Extremely helpful!
@FixThisHouse
2 жыл бұрын
Thank you for watching! 🙏🏽😊
Great tutorial. Thank you so much 👍👍
@FixThisHouse
3 ай бұрын
Thank you for watching! 🙏🏽😊
Pretty cool
Good tips. My added tip... make sure your miter saw is adjusted and working properly before you rely on the angle scale & detents, as well as cutting perfect 90 degrees horizontal & vertical when returned to its "home" position. It will and does get knocked out of position, especially portable saws.
Thank you very much new subscriber
Ty! Just learning!
@FixThisHouse
Жыл бұрын
I’m glad I could be of help! 🙏🏽😊
Good stuff. Thanks for this video.
@FixThisHouse
Жыл бұрын
It was my pleasure! 🙏🏽😊
Great video as always 👍🏽Would love to see a video on different types of CA glues and when to use which types. Keep up the great content.
@FixThisHouse
2 жыл бұрын
Thank you so much! You fave me another video idea! Thank you! I’ll do one soon! 👍🏽🙏🏽😊
Thanks for the great video.
@FixThisHouse
2 жыл бұрын
Thank you for the love and support! 🙏🏽😊
Good job! You made it easy to learn. I can't wait to try it out
@FixThisHouse
2 жыл бұрын
Thank you! It’s super easy and you’ll be making those miter cuts like a pro in no time! 👍🏽😊
You're the best.
Thanks.
LOVE THIS!! Getting ready to do a house myself and all your tips are awesome!!! TY
@FixThisHouse
2 жыл бұрын
Thank you so much!
@FixThisHouse
2 жыл бұрын
Hello Mr. Peters! Great news you have won this videos Giveaway! The other subscriber did not respond so you are next in line to be the winner! Congrats! Please email me to claim your product! Here is my email : Fixthishouse1@yahoo.com . You have 3 days to claim 👍🏽😊
@sandypeters2017
2 жыл бұрын
@@FixThisHouse sent you an email 😁
I sudb because of this one video alone thank you
Great video as usual!ty
@FixThisHouse
2 жыл бұрын
Thank you 🙏🏽!
Nice!
Exellent thank you.from florida.
@FixThisHouse
Жыл бұрын
You are very welcome Roberto! It was my pleasure to help! 🙏🏽😊
Your so awesome thanks for showing us this video
@FixThisHouse
Жыл бұрын
Thank you for the love and support! 🙏🏽😊
Cool!
So good thanks
@FixThisHouse
2 жыл бұрын
Thank you!
Great tip thanks 👍
@FixThisHouse
2 жыл бұрын
Thank you! 🙏🏽😊
This video was perfect for me where have you been Thank you so much ❤❤❤❤
@FixThisHouse
Жыл бұрын
I’m glad I could be of help Margaret! 🙏🏽😊
Awesome!
@FixThisHouse
2 жыл бұрын
Thank you 🙏🏽
Awesome 😎
@FixThisHouse
2 жыл бұрын
Thank you 🙏🏽!
Dude, thank you for showing this tool. I bought one and it save me a lot of guessing. Thanks again man
@FixThisHouse
Жыл бұрын
I’m glad I could be of help Pao! 🙏🏽😊
Thank you so much for the video this really helped me a lot I like the way you explain everything I never have a question after I watch one of your videos awesome work brother thanks
@FixThisHouse
2 жыл бұрын
Thank you so much for the love and support! Your feedback just made my day! 🙏🏽😊
great job
@FixThisHouse
Жыл бұрын
Thank you! 🙏🏽😊
Nice video as always
@FixThisHouse
2 жыл бұрын
Thank you 🙏🏽!
Nice video strait to the point.
@FixThisHouse
2 жыл бұрын
Thank you so much! 🙏🏽😊
I think you are perhaps the best DIY'ER that I have come across. Your demonstrations and explanations are clear and concise (ideal). Than you!
@FixThisHouse
2 жыл бұрын
Thank you so much! Really means alot! 🙏🏽😭
You’re the best!!!
@FixThisHouse
Жыл бұрын
Thank you so much for the love and support! 🙏🏽😊
Awesome way of doing mitres although I always scribe my internal mitres.
Found this video while trying to figure out how to cut an aluminum channel for some LED strips, this is exactly the tool I need for an weird angle I have in a room!
This product is awesome! So many tools, such few money xD Thanks for the presentation again!
@FixThisHouse
2 жыл бұрын
Thank you brotha! Don’t worry I’ll be doing more giveaways! 🙏🏽😊👍🏽
@hayitsj21
2 жыл бұрын
@@FixThisHouse You're helping a lot of people with these giveaways. Great idea and much respect to you bro!
I have a Hitachi C10FSHC 10" and I'm trying to miter cut 5.5" wide boards...but the boards don't fit in the upright placement (flat against the fence) that you're cutting yours. On top of that, the saw maxes out at 45 degrees when tilted. Great video, tho. I looked at many others and yours was straight to the point! Thnx!
Nice video 👍👌. Now I’m gonna try do it my self
@FixThisHouse
2 жыл бұрын
Thank you! 🙏🏽😊
Thank you thank you you videoo is awenson
This guy is awesome
@FixThisHouse
Жыл бұрын
Thank you Jackie! 🙏🏽😊
I own this tool! Makes me look like I know what I’m doing haha
Dude, you're awesome! And I'm a handyman.
@FixThisHouse
Жыл бұрын
Thank you so much George! 🙏🏽😊
I need to install over 400 linear feet of 5½" square baseboards. Finish carpenters are quoting $70-$80 per hour to install. I've installed baseboards before but the miter cuts have always caused me trouble. Now I see why. Thanks for the video tips fo this DIYer!
Yup like a glove!
Ayos tol
Yep, I was doing 45°, after 4 tries I gave up and resorted to You Tube; thank you, really helpful video! 👍
This video is aces! Thank you. I think you just saved me from 10 Tylenol pills tomorrow lol
@FixThisHouse
Жыл бұрын
Lol! Thank you so much! I’m glad I could be of help and not make you take 💊! 🙏🏽😊👍🏽
Aha! So that's how it works. The miter angle on that tool is used any time two pieces are joined together. I like that it's made out of aluminum rather than breakable plastic.
He is a good teachers unlike those who come with 30 experience and long talks in the end do not say nothing. 👍
@FixThisHouse
22 күн бұрын
Thank you so much for the love and support! 🙏🏽😊
Would that tool work well with cutting miters on quarter round for baseboards?
@fix this house Do you have a video for crown molding using this technique?
will this method work on shoe trim as well?