How to Get the Best Color Accuracy with Govee DreamView T1 Pro TV Backlights?
Ғылым және технология
In this video, Matt will teach you how to get the best color accuracy Govee DreamView T1 Pro correctly. #Govee #GoveeDreamView #GoveeT1Pro
Link to know more about Govee DreamView:
www.govee.com/govee-dreamview...
Пікірлер: 61
I was hoping for more tips about adjusting things within the app. This video pretty much told me not to have any other lights on near the TV/camera. The random dubbing towards the beginning and end of the video was pretty funny though.
@LDN-pup
2 жыл бұрын
Right!? This video should be called ‘How to stretch one really obvious “tip” into a three and half minute video’! I’m not a moron, I don’t have other lights affecting it… so how do I get the best now? Agreed though.. the dubs made me lol.. I wonder if this video was originally made for the Immersion (but if so, just leave the audio alone and explain in description or subtitles).
@charleyweinhardt
Жыл бұрын
this is the tutorial your looking for! kzread.info/dash/bejne/dIOn0tiIecTKc7A.html
Nicely done, Matt. These look dang neat.
Maybe an idea for the future is to have multiple (smaller) cameras, so they can cancel out each other's reflections and get the best results based on that.
@CMDR.G
Жыл бұрын
I think govee took your ideas with the T2
hahah the robo voice
Thanks for the very good info....🙏🙏🙏
Thanks, Matt! (Even though I don't have one of these ARRGH-)
Can u make a vid with your settings from the app? I am still having trouble getting accurate colors with saturation and white balance
@heribertoarias2203
Жыл бұрын
kzread.info/dash/bejne/dIOn0tiIecTKc7A.html
It would be really great if we could position the bars horizontally, so they will light under the furniture that is fixed on the wall. Great video, thank you!
@charleyweinhardt
Жыл бұрын
I've seen it done, I think I would put them behind on the sides facing out to the sides but slightly angled toward the walls
Nice to know about the camera pointing up 🤔 I've seen a few youtube videos with people having theirs like that
question : do you think that a table with reflection surface could affect the result of the light overall !!
Can you update something with Alexa or with different TVs where the Govee turns on and off when the TV it's connected to does as well.
Where do you recommend putting brightness, white balance and saturation settings? What values?
Thank you 🤗👍🤗👍
can the H6054 do multi color output during video mode? im very confused the original product seems it is not capable but there was mention of free controller box upgrade for it .... If i buy the product now, do i have this controller box upgraded already? please provide some info thank you.
Hello matt from govee can i add and sync a second set of light bars to the t1 pro kit please
I really like the idea of this product (and I have bought it, It’s arriving today). My only complaint is that the light bars are wired together. I have a built in tv cabinet setup, and don’t like exposed wiring everywhere, it would be much easier if each light bar could individually hook into the box. With both wired together I have to fish one of the light bars behind the tv cabinet to have a clear wireless look.
What about getting the Wi-Fi connected? Been through two different sets gone through all the troubleshooting and NOTHING. Bought the Govee smart fan and guess what? Connected to Wi-Fi without issue.
TL;DR: Turn off all the lights other than the backlights ...
Hi Matt can you do a video or link a shortcut if there is video to add a second strip light (2nd wall) there is a info sheet with my lights but it's not user friendly & confusing. I have T1 pro BAR/Strip on TV (gaming) & want to add & sync a 2nd strip light behind my chair & to colour match my T1 PRO system (regards in advance)
@heribertoarias2203
Жыл бұрын
kzread.info/dash/bejne/dIOn0tiIecTKc7A.html
I love Govee and have been a big supporter of them but am bummed with the T2 75in kit.
How do u seperately assign color of the light bars? Mine both show same. I want to assign one to stimulate tv’s right side colors and left one tv’s left side colors, I seen others do it but I have no option to assign colors separately per light bar, in the app(dreamview center) there is only one TUBE showing with 6 led slots, and whatever I change there, it applies it to both light bars…anyone help? I have T1 strip back light as sync center
@heribertoarias2203
Жыл бұрын
kzread.info/dash/bejne/dIOn0tiIecTKc7A.html
Yeah but how can you get them to show black AKA turn off during the dark scene?
How do I re calibrate ?
Just installed t1 and im having a hard time configuring for the camera wont pick up the colors from the bottom part of the tv?
@tevilawson6297
11 ай бұрын
Same… did you ever figure it out?
i had some serious question, is my wall where is my tv its a black wall this gonna be bad for the efect lights ?
@charleyweinhardt
Жыл бұрын
yeah you want to tack up a white sheet behind which should catch even more light than a normal wall texture
Its ok in 49" tv?
I wish theres a setting of no led is lightning when tv shows black videos
Is this upgraded from the 2020 immersion version?
@narnarbar
2 жыл бұрын
Is this one better or the same as the stranger things one?
@MrUnk0wnN
2 жыл бұрын
@@narnarbar the same one
como apaga la luz con los dedos
WARNING ! if you are going to use the 3M mounts .. use some painter tape to identifies the location you want them ..once these are on they are not coming off ..
It doesn't address the problem I had - reflection from the table. When you use wall mount and have your TV slightly tilted down camera tends to pick up light reflections from whatever is underneath the screen. The only solution I found is black cloth under the TV - damn glossy OLED screens :P Screen itself was producing enough light pollution to cause detector to loop - especially red colors. Took me few hours to figure it out - now it is fU
Why dont you Provide a Windows App like hue? This cam is a Bad solution for PC.
Good product, but easier to calibrate without those orangy blockish things
instead of blaming your mistakes on the customer, try working on a solution that doesn’t require a highly specific szenario
Turns off all lights *still purple*
this is the tutorial your looking for! kzread.info/dash/bejne/dIOn0tiIecTKc7A.html
Pretty annoying that it picks up blacks as green. They should really just go a dim cool white. 😢
What a bunch of c... I have no lights on I my room and I get a red bar all around the screen turns out Govee sent it with saturation set to maximum and the bar puts all the way to the red how is that for a company who says it has to put colour accuracy, more or less watching this video Govee is blaming me and says it all correct set up. I'm not very good at this sort of thing and it should be easy to set up and use, and for two days now, and is a complete nightmare now. And the app oh my god I go into the app to change the color so it shows white not red when white is on the screen, and I press the button for confirmation and go out see that the color still has not changed go back in and it has reset it self. Have to open up Dreamview then it keeps the changes. I regnet buying it and advice everyone not to buy it at all maybe the new version is better but since this is not good then why should the new one be. And this video was no help at all and totally useless
This video hasnt taught me anything. My color accuracy is still way off.
@MetalMetalize
2 жыл бұрын
Try to change saturation, brightness and white balance setting
@oui.monsieur
2 жыл бұрын
@@MetalMetalize that's the first thing I did
@MetalMetalize
2 жыл бұрын
@@oui.monsieur I don't know, then... hmm, I had some problems with accuracy too. What you could try too: make sure the angle of the camera sees all the screen. For me, at first, it saw only 3/4 and I had to tilt it. If that doesn't work, make sure there aren't other light or glare sources. And also try to raise the brightness of the TV itself and maybe tweak the TV white balance too
@oui.monsieur
2 жыл бұрын
@@MetalMetalize I appreciate the info but this is my 2nd Govee kit. The first one wasn't accurate ether. I have a smaller screen 55inch and it's OLED. So it's the brightest in the industry. I think for best accuracy the imagine has to come in thru HDMI and not a camera. That's why Phillips is more expensive. But there other brands that knocked off Phillips already like lytmi I think it's called.
@gregoryscottsmith84
2 жыл бұрын
Turn you saturation down to 0 and your brightness down to around 60.
Rubbish, the dark scenes are purple! It shouldnt work at all with black.
The picture quality of this video stinks. I like the Chinese communist robo voice mixed in, real professional and kinda scary. If putting the light bars to close to the tv can interfere with the camera then why does it include mounting brackets that literally stick to the back of the tv?