When I made my first head, lining was my worst enemy but now with more practice and watching videos like this one, I now master lining and my fursuit making skills have improved significantly.

Thank you for sharing this! It is very helpful for making my daughter's first fursuit. I do have one trick to share for you to quickly turn the whiskers right side out. Pin a string to one end of the whisker fabric before sewing. Attach a string to the pin that you will sew inside of the whisker tube. Use the string to pull the pinned end through the tube to turn it right side out.

THANK YOUU! This is literally what I’ve been searching for for a long time now! :)

Thats a beautiful fursuit head! You're so talented!

I usually watch these for preparation.

Your videos are so helpful and informative, thanks for doing what you do! Would you ever do this tutorial but on a 3d base with a moving jaw?

@MugiwaraCosplay

8 ай бұрын

I have this (I used stretchy fur tho) kzread.info/dash/bejne/dX2DurmrorzAp7A.html

I'm new to all this but I really want to make a Bluey Mascot costume to surprise my 5 year old daughter. Would you be able to recommend any of your videos that could possibly guide me to accomplish this?

FINALLY ive been looking for the whiskers tutorial for so long, tysm!!

This is exactly the info I needed to get my project going, thanks so much!

You make it look so easy!

Omg I’m planning to make my very first 3D printed fursuit and this video really REALLY helped a lot and your fursuits are amazing. Thank you so much for the tutorial :)

I wanna thank you so much, I'd bought some of your patterns on your etsy, so helpful, Thank you.

I might not be using this for a 3d printed one but this helped with me knowing how to make the other part of the head

Thus video is very helpful. I'll consider using this method if I do make a fursuit. Thanks for the info. Can't wait for your next video. Keep up the great job.

Nice video very helpful.

I just bought your kemono 3d file, and it's printing now!! My fursona is all the same color minus the eyebrows, would the process of taping then drawing it out on the fur be the same?

thanks a lot for this tutorial I will try to create my 1 fursuit

what kind of stitch did you use on the face? also great video, it‘s really helpful! ❤️

Can you make a digi foot paw tutorial video

@MugiwaraCosplay

9 ай бұрын

I already did, here: kzread.info/dash/bejne/nISLupadmZCymM4.html

hi! i don’t own a mannequin head. What else could i use?

@thebestbud

15 күн бұрын

I'd just save up and buy a mannequin head. They aren't very pricey. If you can't afford it than maybe wait to start on your suit.

@kaitheradical

2 күн бұрын

@@thebestbuddo you know a good one? i don’t wanna buy the 100 dollar one since that’s too much for me, know any cheaper options?

@thebestbud

2 күн бұрын

@@kaitheradical Any mannequin head would do just fine actually if you're just planning on making them for yourself or a few friends! My friend makes AMAZING fursuit heads and she just uses a cheap foam one that has been kicked, tossed, and drawn all over throughout the years. However make sure to use a measurer to get YOUR face measurements (Mainly height, bottom of chin to start of head. If you rely on a mannequin for this it most likely won't fit your chin) and make sure to try your head on and off mannnnny times BEFORE FURRING to make sure it fits you snuggly.👍 The main struggle is just a 3$ one is light, so it makes it difficult to work on without proper weight plus obviously it won't last forever. But thats not hard of a workaround, just takes a bit more persistence.If you want it a bit easier you could get a harder plastic one that has more weight for a bit more money.

@kaitheradical

2 күн бұрын

@@thebestbud ah, alright i'll get one, tysmmm!!

@thebestbud

Күн бұрын

@@kaitheradical Good luck!!

This video is fantastic. 🎉

I really hope you make it to 900,988,900,988 Subs❤❤❤🎉🎉🎉😊😊😊

I’m useing fabric for everything because my fursona is a animatronic wolf (I have more animatronic ocs/fursona s but im doing flix First)

this was really helpful! though its gonna be a bit confusing for me because my base has a back piece so im not so sure what to do

@echoless3474

2 ай бұрын

Probably the same steps as here but just skip making the straps

I need to rebuild my foam part what would be the most secure way to extend ( modofy )it to fit a larger size ?

@MugiwaraCosplay

9 ай бұрын

Maybe longer elastic bands

I have a question what is the lining material made out of and where do you get it from?

@echoless3474

2 ай бұрын

It's in the description

Do you have a template for the lining on the inside of the head?

Maybe you can make a kemono fursuit lining tutorial

@MugiwaraCosplay

9 ай бұрын

The lining method is the same as other fursuits

How short do you usually shave the fur on the head? I cant really find any information on that online and I dont want to mess it up!

@MugiwaraCosplay

3 ай бұрын

I don't really know, I just shave until I like it and without seeing backing

I was wondering how you make the eyes for the fur head. Do you buy them that way? If not, how do you make them? Thank you for your time. I really enjoyed the video.

@MugiwaraCosplay

2 ай бұрын

I make them, I show here how: kzread.info/dash/bejne/d6Cru8p6qtXMoLw.html

@inkberryinfusion

2 ай бұрын

@@MugiwaraCosplay Awesome! Thank you very much.

Question! Do you have to do the lining on the inside of the mask? Why?

@bark-infestation

3 ай бұрын

It's not necessary, but it's a lot more comfortable. And it seems like it makes the mouth easier!

@angelcakes7103

2 ай бұрын

It also helps a lot with keeping the foam clean from sweat, ofc you can’t always protect the suit but lining dies definitely help with that :3

Can we do this with no lineig fabric in side?

@MugiwaraCosplay

9 ай бұрын

Funny enough that question was just discussed by fursuit makers on Twitter yesterday. The conclusion seemed to be technically only on the foam padding (You don't want raw foam to touch your face, It's not comfy at all). Personally I want to try out partial lining on the next 3d printed head and see how it looks and feels like

May i ask how strong is the magnets are and are can fall out?

@MugiwaraCosplay

9 ай бұрын

Pretty strong, they don't go anywhere

What 3d printer do you use to print the headbase?

@MugiwaraCosplay

8 ай бұрын

Creality cr-10 max

Is it possible to skip the linen and just use balaclava?

@MugiwaraCosplay

9 ай бұрын

I still highly recommend lining the padding because raw foam on your skin is not comfy

What kind of software is for making head? if its fine to ask

@MugiwaraCosplay

6 ай бұрын

Blender

Where did you get the strap for the back of the head or if you made it how did you make it?

@Pinkmedusa13

6 күн бұрын

😮

@MugiwaraCosplay

6 күн бұрын

The strap is just elastic bands sewn together

Can you just add fur to the 3d printed base without foam?

@MugiwaraCosplay

7 ай бұрын

No, without foam padding you are not able to wear it

can these same steps apply to a non static jaw? i want to make sure i dont make a mistake and then the jaw wont open

@MugiwaraCosplay

5 ай бұрын

Mostly. You will need to leave the jaw open while patterning for fur

@scenekhal

5 ай бұрын

@@MugiwaraCosplay what does that do?

@MugiwaraCosplay

5 ай бұрын

To make sure the jaw will open after it's furred. Normal fake fur is not stretchy

@scenekhal

5 ай бұрын

@@MugiwaraCosplay ohh okay thanks

Does the tape not get stuck to the base?

@echoless3474

2 ай бұрын

You use cling film to wrap it in first so you can tape on top of it

how would i put fabric teeth in a base like this?

@MugiwaraCosplay

26 күн бұрын

You can sew them on the mouth lining

Do you caver the whole head or just the side

@MugiwaraCosplay

3 күн бұрын

When making the tape pattern? If the design is symmetrical, just half of it

@TherianSisters-K8MJ

3 күн бұрын

@@MugiwaraCosplay I meant like on the manaquan head

@MugiwaraCosplay

2 күн бұрын

What do you mean?

@TherianSisters-K8MJ

Күн бұрын

@@MugiwaraCosplay do I cover the while thing in duct tape

@TherianSisters-K8MJ

Күн бұрын

Whole I meant

what happens if a non-static head keeps moving while you move your mouth Did I make a mistake on the size?

@MugiwaraCosplay

6 ай бұрын

You mean a moving jaw head or?

@browniepelt

6 ай бұрын

moving jaw@@MugiwaraCosplay

@MugiwaraCosplay

6 ай бұрын

A moving jaw head is suppose to move the jaw when you move your mouth. As long as the head is not too tight fitting it's fine

@browniepelt

6 ай бұрын

thanks@@MugiwaraCosplay

four :D

anyone know what the brush is called used here?? 4:52

@echoless3474

2 ай бұрын

A slicker brush you can find them in pet stores

@BloodTheTea

2 ай бұрын

@@echoless3474 hehe all good! I figured it out and got one from Amazon x3 thanks though! ❤️

@echoless3474

2 ай бұрын

@@BloodTheTea I'm glad you found it good luck on your projects:3!

woooo

First here

First

Reverse funkytown

@Nuclear_Biscuit

9 ай бұрын

Why?

@ryliiiiiiii

9 ай бұрын

@@Nuclear_Biscuit Best you don’t know

( ha we declare war)

@MugiwaraCosplay

9 ай бұрын

?

I was about to watch a video, but right after I clicked the thumbnail, block of two 15s unskippable ads showed up. As a creator myself, I know, the choice of ads’ length is not up to you, but the time when they display actually is. You could choose the first ad to be played after 10-15 seconds of your video, but you checked the “on the beginning” option instead. Pro tip: First 10 seconds of a video are criticality important to keep your viewer’s attention. Well, maybe next time. Have a nice day.

@bark-infestation

3 ай бұрын

most videos have ads play right at the beginning

@BeastRacid

3 ай бұрын

​@@bark-infestation Yes, most creators do shitty thing, so let's leave it as it is. :P It's their watch time tho.