How To: Frigidaire/Electrolux Igniter Switch Assembly 316580611
How To Replace: Frigidaire/Electrolux Igniter Switch Assembly 316580611 www.appliancepa...
Symptoms: spark module does not spark when one or more control knobs are turned on.
Tools: 3/16" nut driver, 1/4" nut driver, Phillips screwdriver, flathead screwdriver.
This Frigidaire/Electrolux made Range Igniter Switch Assembly replaces the following older part numbers on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, Sears, and Kenmore Ranges: 1793845.
Buy the new Range Igniter Switch Assembly 316580611 here: www.appliancepa...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepa.... We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros
Пікірлер: 21
I finally tackled this project as was able to complete it in about 25 minutes. This video helped immensely. Thank you. PS: if I can do this anyone can do it!
So to replace that knob wire harness I need to disassemble half my range and then put it back together? It would be easier and much more satisfying if you give the home address of the wiring designer for this unit so I can go kick him in the balls.
@servenet299
2 жыл бұрын
C´mon, guy, itś not that complicated. Be thankful you got a video that EXACTLY replicates your problem and walks you through the MAX...half-hour easy fix. Gotta be THANKFUL, my dude.
This one is really odd...I used 3/16¨ socket for THREE BURNERS - no problem. I go to remove the front left burner...and the 3/16¨ is too big. I try 4mm...too small. I have to try a 4.5 mm nut driver I have to order online. How does such a thing happen? The hex heads were not rounded, The 3/16¨ was simply (slightly) too large. This is the kind of thing that makes your ¨why me¨ mentality go ballistic.
Make sure you use PB blaster on the burner screws and screws below the burner. The most used burner will have really rusted screws.
Very helpful video. Thanks. This also shows just how poorly designed this range is. Why couldn't they have designed this to be accessible with the ONE front panel removed and all the wire connections for this right in the front along with the assembly. Tearing apart most of the stove to hook up two wires is just plain bad designing.
@SteveAddabbo
3 жыл бұрын
I agree ... I have one burner that isn't igniting and I have to take apart half of the stove..??? I found just turning on another jet at the same time ignites the burner I am TRYING to use. I have one bad switch and I have to replace all four??..Really bad design...I'm not very happy with my Frigidaire Side by side Fridge either..Ice dispenser stopped working, part of the fridge freezes by the cheese drawer and the cold water dispenser gives a full glass of room temp water before it gets cold..it even admits it in the owners manual... That's it..no more Frigidaire anything for me....
@venubhatia4149
Жыл бұрын
Excellent solution. Many thanks !
Three of my four burners make the “clicking” sound when turning the knob to the lite position. One does not make this sound. The problem burner does produce a spark at the igniter when any other knob is turned. I hear gas when the problem knob is turned. Would it be most likely that it’s the harness that needs replacing? Any other issue it could be instead of the harness?
Nice in depth video
Joseph Fung's tip (below) is essential to read & understand. Those little hex head screws that hold the burners tight to the top are really flimsy. If not prepared ahead of time, you will break a lot of them off at the head, EVEN IF YOU ARE CAREFUL! SIMON: please cut in a warning about this. You made it look like those screws jump off with only fingertip pressure. I was careful. applied heat to the screws to help loosen and with all that broke off 6 of 8 heads. Tough in me. Would have been an easy job elsewhys.
@rjsophia3712
4 ай бұрын
I will use PB Blaster on the screws. Seems like heat on the screws would weaken them. I’m a 57 yr old SUPER handy woman and I’m fixing this issue in a rental unit we own. Thank you for making these awesome videos. I’ve fixed everything from front loading washer motor control board to converting a high end slide in range from propane back to natural gas (purchased a 3 yr old $3,000 model for $166 at Habitat for Humanity Restore). I’d be totally lost without Appliance Parts Pros.
Boy, do I have one hell of a project ahead of me
Excellent videp
I have a Samsung Range and the spark ignition switch has three wires,black red and blue,how can I test it to be able to know that it is working.
@appliancepartspros
5 ай бұрын
What is the model number of your range?
It's only one igniter that won't shut off. All other switches on the assembly are functional. Can I just replace the one module? Part# WB22K5083?
@stephenleete6269
4 ай бұрын
I found a video on how to take one switch apart, and clean the contacts inside it to get it working again. It’s easy with a utility knife. In my case, one of the contacts is broken. Trying to find a replacement to the small metal contact!
How do you know if it's a bad spark module instead of a spark ignitor switch?
@SteveAddabbo
3 жыл бұрын
Chances are if none of the switches work the module is bad not the switch harness...
cool