How to flush your Yamaha outboard correctly!
Автокөліктер мен көлік құралдары
Properly maintaining your Yamaha outboard motor is essential for long-lasting performance on the water!
In this video Aaron goes more in-depth on how to flush a Yamaha motor using the cold flush! The USA and the majority of the places globally use this type of fitting. Australia does not and as such us Aussies have to use an adapter. They're $4.5-$6. The cold flush fitting back fills the water gallery's throughout the head, so it gets both sides of the thermostat and then goes down with gravity through the impeller. An impeller pulls water up from the bottom when turned on, as such, whilst on cold flush do not turn the motor on as it will starve the impeller of water. It's called a cold flush for a reason! Simply attach the adapter to the flushing port, connect a garden hose, and turn on the water while the engine is off. This process helps remove salt, sand, and other debris from the water jacket, ensuring a clean and healthy motor. Give your motor the TLC it deserves and enjoy smooth motoring for years to come!
#YamahaOutboard #BoatMaintenance #flushingadapter
Пікірлер: 227
Should be on ALL outboards. Make it an industry standard.
@BrisbaneYamaha
Жыл бұрын
All yamaha do Just buy yamaha and you’ll never have a problem ever
@johnschmidt659
Жыл бұрын
Lol funny you say that cause my mercury has that except I don’t need a adapter just threads right on to the hose
@Tracker7266
Жыл бұрын
@@johnschmidt659 I have a Merc also with the hose thread port. But it doesn't flush the lower unit to my knowledge. If we're talking about the same thing. I still have to use the ear muffs to flush the motor while it's running.
@302Camaro
2 ай бұрын
But, will the water make it up into the T-Stats?
@craigsavage4969
20 күн бұрын
@@BrisbaneYamaha yamaha is deff. The best.
Couldn't be clearer. Love your emails. If you open a branch in the UK I'll be your first customer
The worlds biggest boating controversy! Love your work mate, cheers 🍻
@yourselfdotcom
Жыл бұрын
😂
@BrisbaneYamaha
Жыл бұрын
There’s a free tee shirt at brisbane yamaha for you
I hope the Yamaha people see this guy and sponsor him.👍
@fernofinity8997
Жыл бұрын
Did you see his shirt by any chance
This is too funny! I’ve always knew of this way but just thought it was a “last resort” if I don’t want to piss off my neighbors now I know I’ve been doing it wrong! Thank you man now I have to convince my grandfather 😂
@boosted2809
10 ай бұрын
Same here man, I would use this method when I get home at like 2am and don't want to start the motor that late. The next day I always still hook the ears up to make sure I can get all that salt out.
I actually flush my Yammie with the flush port and the muffs. Never had an issue with the pressure using the muffs according to the pressure gauge on the dash. Town water pressure here can hit 90-100psi though.
I add a little bit of dawn dish soap then the hose.
I actually bought my F70 yamaha because of "Boats Boats Brisbane!" and their walk around of that motor
@BrisbaneYamaha
Жыл бұрын
Free tee shirt for you
Best 2 stroke outboard yamaha 🥇
@lukawilliams4822
Ай бұрын
You wanna buy my 2010 2stroke 200hp Yamaha ?
@eskokorhonen8348
Ай бұрын
@@lukawilliams4822 Best Yamaha 2 stroke outboard V6
I just love getting back at my neighbors after they have partys every weekend last year😂🎉
@BrisbaneYamaha
6 ай бұрын
I think my neighbours hate me too
Nice. Should be made mandatory for all manufacturers.
@BrisbaneYamaha
Жыл бұрын
Would but other brand outboards are just a car engine tweaked yamaha are designed from scratch to be an outboard that’s why there the most reliable and biggest seller in world Just a fact
Just bought me a little 9.9 Yamaha. Best motor I think I’ll ever have🤷🏻♂️
@BrisbaneYamaha
Жыл бұрын
I agree Yamaha is by far the best And I’d know because I’ve sold every brand and I give warranty Yamaha every day
I was told that flush port is only good if the motor is still hot, otherwise you should use the muffs to open and flush the thermostat.
@BrisbaneYamaha
Жыл бұрын
Ideally you would alway flush your motor while still hot But yamaha want you to just use fresh water flush
@BrisbaneYamaha
Жыл бұрын
Ideally you would alway flush your motor while still hot But yamaha want you to just use fresh water flush hot or cold
@Blinkblink742
Жыл бұрын
Agree - lots of boat mechanics say not to use the flush port because of the thermostat is closed, the head doesn’t get a flush!!! Use muffs!!
@th3smurf692
Жыл бұрын
Someone told me that there can be a thermal shock if you flush immediately after use. I think its bs. But everyone tells me something else 🤷
@nevadaboy9769
11 ай бұрын
@@th3smurf692i would say it does, you dont put cold water in your car radiator when its hot so your OB is no different!
I thought this method does not allow the thermostat to open so you only flush half way.
@BrisbaneYamaha
Жыл бұрын
No flushers both sides and most yamaha thermostats gave a hole in them to allow water through It’s a yamaha
@lynchcreekmuzzy5759
10 ай бұрын
@@BrisbaneYamahaso happy to read this....new VMax175 owner. 😎👍
That looks nice
good ole Yamaha!!! 💪👏👏👏
I dunno on the outboards but in the jetboats the engine HAS to be on prior to starting the water or you run the risk of flooding it
This guy is great
@BrisbaneYamaha
4 ай бұрын
Free tee shirt waiting for you
Wifes family are very knowledgeable on motors and when we started looking at boats, they said "Do Not Buy Anything But a Yamaha".....so thats what we did. Another family member bought a Honda...locked it up, luckily under warranty.
@BrisbaneYamaha
10 ай бұрын
Never go off brand Yamaha outboards Honda push lawn mowers and generators Kubota mowers tractors eta Still chain saws Toyota cars for work Mercedes for fun Never have a bad day again
Do both can’t hurt
Lol- wonder what he hit when he chucked the earmuffs.
@BrisbaneYamaha
Жыл бұрын
One of my boats buggar
@andrekemp5059
9 ай бұрын
Sounds like cowling ding
@jordanfalcioni4745
8 ай бұрын
A mercury 😂😂
@andrekemp5059
8 ай бұрын
@@jordanfalcioni4745 😂😝😁
Brilliant!
@BrisbaneYamaha
9 ай бұрын
Your brilliant !! Free tee shirt waiting
Beautiful
@BrisbaneYamaha
Жыл бұрын
Your beautiful
Brisbane Yamaha. Thank you. Learned and recently applying this the way you explained with the hose and fitying. Happy to hear it from you. One question though: I have to do this in the marina tied to the dock. That is, boat is on the water. Motor tail comes out of the water with full up trim. Should I flush with trim up or keep tail in water for most effective operation.
@kemalettinerbatur3446
Жыл бұрын
My motor is a F130AETL.
@BrisbaneYamaha
Жыл бұрын
Either way same
Yamaha best outboard on market i love my F40FETL
@BrisbaneYamaha
10 ай бұрын
Free tee shirt waiting for you Wise man
@erikandrehoglund55
10 ай бұрын
@@BrisbaneYamaha 🇸🇪🇸🇪🇸🇪🇸🇪
Sure seems like it would help keep the water jackets clean from salt water !
@BrisbaneYamaha
Жыл бұрын
Yamaha designed it so it’s perfect
My Yamaha 130 Saltwater series has this flush port. I've been using the muffs to flush it so far. I''m curious now as to giving it a shot after running the motor in saltwater. Just checked the owners manual, and yep, should be good to go.
@BrisbaneYamaha
9 ай бұрын
Just do it I sold thousands and thousands of 130s saltwaters Great motor last forever
@jrbuch
9 ай бұрын
@@BrisbaneYamahaThat's great to hear. It absolutely hammers, plenty of power. The only draw-back is sometimes it can be hard to restart when warm, but otherwise, I keep it well-serviced and it's looked after me well.
You could have a ham and pickle sandwich while you flush the motor.
@BrisbaneYamaha
9 ай бұрын
Good idea My uncle had cheese and pickle every single day for 40 years up to the day he had a heart attack changing a truck tyre
Time for the next size up in shirts, brother.
@BrisbaneYamaha
11 ай бұрын
Done See latest
Just bought a new small boat with a Yamaha F40. The manual still talks about using the rabbit ears. Or flushing in a test tank. Is the garden hose connector equally as effective? I’ll be running mainly in saltwater and want to make this beauty last as long as possible.
@BrisbaneYamaha
10 ай бұрын
Yes you don’t need anything else Light spray of yamaha silicon Derive once a year and that little beauty will last forever
We still use rabbit ears !!!
@BrisbaneYamaha
Жыл бұрын
It’s your motor
The Mercury motors don’t require an adapter; garden hose screws right on.
@BrisbaneYamaha
Жыл бұрын
Sell the Merc while it’s still going and buy a Yamaha Don’t say you weren’t warned
I worry about this daily🤫
@BrisbaneYamaha
Жыл бұрын
I can’t believe it’s so hard But every Suzuki before 2010 has corrosion issues and they call Mercury aspirins for a reason
Good info. How about adding some salt away into the supply towards the end?
@BrisbaneYamaha
10 ай бұрын
No salt away never Yamaha don’t need any additives
I have a 2011 F115. Wondering if when I flush while boat is in the water, should the motor be tilted clear of the water or fully down? Thanks.
@BrisbaneYamaha
8 ай бұрын
Doesn’t matter either way
That’l teach ya !
Do I have to keep the outboard stand straight or I can leave it tilted while flushing ? I got my boat sitting on the Seapen.. thank you
@BrisbaneYamaha
Ай бұрын
Doesn’t matter
Yamaha lasts forever but shirts don’t. You out grow those😂
@BrisbaneYamaha
9 ай бұрын
Gone up 2 sizes And still tight
I have a new F150. Should the water flow out the pilot hose when flushing this way?
@BrisbaneYamaha
5 ай бұрын
Yes
Rabbit ears? We call them earmuffs. 😅
@BrisbaneYamaha
Жыл бұрын
I think they’re shit always get wet legs They can slip off you can forget to take off and then chew them up in prop I can’t believe so many people still use them Personally a big bucket deep enough to cover water pump is best but if you have a yamaha with fresh water flush just use it can understand why people think yamaha would make something that didn’t work or not understand their own product ?
@andrekemp5059
9 ай бұрын
I trust earMuffs mutsh more. He can sponser me that one
Can you run the engine while its connected that way?
@BrisbaneYamaha
Жыл бұрын
No No No Probably won’t wreck outboards but you shouldn’t
@andrekemp5059
9 ай бұрын
Il wil not do that! Impeller can burn. I have had a engine that the valve inside did not shut after flush and water flow bypassed presure out the side leak
I have a 2013 Yamaha F150. Same deal for me? Will this work and flush the entire engine properly even if it is not warm?
@BrisbaneYamaha
9 ай бұрын
Yes Perfectly
What year did yamaha start puttng these fittings on 4 stroke 115 outboards
@BrisbaneYamaha
Ай бұрын
We had them on our 2 strokes so always
Does this bypass the thermostat and flush the whole block? Or do you need to run the motor until the thermostat opens?
@BrisbaneYamaha
Жыл бұрын
Do not run motor it will flush both sides yamaha has designed it to work as you would expect
Is this on a 2007 yamaha 150 outboard also or is that motor too old??
@BrisbaneYamaha
22 күн бұрын
Yes it’s not new Yamaha saltwater two strokes had it in 80 s
Can you flush straight away or do you have to wait till motor cools down?
@BrisbaneYamaha
8 ай бұрын
Straight away is fine
Well I could buy about 5 of my outboards for the price of a new one
Can you idle the motor like this?
@BrisbaneYamaha
13 күн бұрын
No
We call them ear muffs. Not sure I ever heard rabbit ears since tv’s lost their antennas. Yes I know you’re Ausi.
@BrisbaneYamaha
Жыл бұрын
Maybe I made the name up I never thought about it You should move the family to Australia it’s the land of real opportunity True USA in the 20s
What if the thermostat is closed? It's not really flushing the whole motor
@BrisbaneYamaha
Ай бұрын
Wrong There a hole in thermostat It’s Yamaha it works
Can you winterize it the same way with antifreeze?
@BrisbaneYamaha
7 ай бұрын
No Winterise is a spray through air intake
This method is used to clear the engine of any salt water right and no other reason?
@BrisbaneYamaha
Жыл бұрын
Correct
that flushing method applies to what years on ?
@BrisbaneYamaha
2 ай бұрын
If outboard has a fitting started on saltwater models in the 90 s
Can you do this on tilted position?
@BrisbaneYamaha
8 ай бұрын
Yes
what if u wanted to start it up like run the motor?
@BrisbaneYamaha
11 ай бұрын
It’s your outboard do what you want
Sounds like chopper works for Yamaha now
@BrisbaneYamaha
Жыл бұрын
We know where you live Lol
Great video thanks for explaining. Quick question, when I flush my 2023 90hp Yamaha this way I get no water out of the tell tale. Tell tale pees like an 18 year old after 4 pints when its running though. Is this normal? Cheers!
@ericsharp6876
10 ай бұрын
(I mean when its running like out on the water, I'm not running it while using the flush attachment)
@BrisbaneYamaha
10 ай бұрын
Are you sure because there should be If your in qld call the team 38881727
@mr.annoying9453
9 ай бұрын
did you end up figuring this out? i get nothing from the tell tail either. 130hp 2023.
@ericsharp6876
9 ай бұрын
@@mr.annoying9453 yep it’s water pressure from the hose. Has to be pretty high to get it to come out. Make sure all hose fittings aren’t leaking etc.
@mr.annoying9453
8 ай бұрын
@@ericsharp6876 thanks man
Luv yammys
Can you do it this way using salt away flush?
@BrisbaneYamaha
Ай бұрын
Yes but your wasting your money
@jamiehurtt3530
Ай бұрын
I thought everyone uses salt away if yiure ru nong in salt water ?.
U would not of known that champ.. The sales rep told u that..
@BrisbaneYamaha
10 ай бұрын
Yamaha famous for reliability They recommend
I don't own a boat but I'm sold
@BrisbaneYamaha
Жыл бұрын
I can do finance with no deposit Lol
@DrGrinsp00n
Жыл бұрын
@@BrisbaneYamaha lmaooo appreciate ya
My evinrude etec has one
@BrisbaneYamaha
Жыл бұрын
Yes every motor brand will have one day
Is this necessary on fresh water boats
@BrisbaneYamaha
5 ай бұрын
No
Why dose it take longer to have the water come out the tell tail then the bottom it comes out but take a bit
@BrisbaneYamaha
7 ай бұрын
Water pressure Water needs to do thought engine before it gets to bottom half
@ktmdays
6 ай бұрын
Sound like my 115 is breathing heavily when at idle any idear why I don't here it when moving
does water have to come out of the tell tale?
@BrisbaneYamaha
Жыл бұрын
Yes
so 2.5yrs ago i bought my first motor yamaha 200. My repair guys say the muffs are good but this video is how i flush my motor… i tried the muffs and didn’t like em
@BrisbaneYamaha
Жыл бұрын
Follow your repair guy or yamaha Up to you
Motors are electric. Engines are combustion. Say it lmao 🤣
@BrisbaneYamaha
Жыл бұрын
Wow I didn’t know that So it outboard engine ? I’ll try and get it right
I dont trust that flush on side! Salt build up on waterpump impeller after side flush. How do I know! I stripped te gearbox off and opened the pump housing and have a Looksee salt crystels after 1 week.
@BrisbaneYamaha
9 ай бұрын
Yamaha should hire you and sack all their engineers Think about it
@andrekemp5059
9 ай бұрын
@@BrisbaneYamaha Good advice. But you cant say that Pipie on side is the best. Flush from the side pipie or from the vanes on Gearbox both good 50/50. Solang owner flush there outboards less work for us. If they dont flush the is Money to be made.
So ur saying this flushing method is better than cups u saying we don’t need to worry about saltwater buildup in the impeller ? I think if it is going to sit a few months like winter time rest u might flush with cups to get that salt out. I ran a Yamaha 20 years used both. Used cups 20 years. Motor is still running great. Just bought new sho 150 to replace it but I did cups 20 years. No problems. Just askin
@BrisbaneYamaha
3 ай бұрын
No argument if used correctly perfect Two points Lots of people don’t use cups correctly and that’s why alternative was invented Boats left in water it’s hard to use cups Don’t you think it’s eazier just plugging hose in
@tealnexttimebond8859
3 ай бұрын
@@BrisbaneYamaha Yes but the impeller isn’t turning your not cleaning the impeller and all that down in lower unit what little does get cleaned out. Yea it’s always in water course use the hose fitting.
@BrisbaneYamaha
3 ай бұрын
Yes Lack of water pressure and improper fitting of cup was the issue Yamaha wanted to fix Every year we get people with melted impellers through using cups wrong Your not one but others do
Wht tht item name mr.?
@BrisbaneYamaha
9 ай бұрын
Fresh water flush
Sound like my yamaha 115 is breathing heavily at idle is that normL
@BrisbaneYamaha
6 ай бұрын
No is the answer If your near me drop in and my guys have a look That said f115s are known for their reliability so I can’t see why you’d have an issue and I’m not sure what breathing heavy is
@ktmdays
6 ай бұрын
@@BrisbaneYamaha I was told by yamaha customerservice that it is a irc idle valvemakes a growling noise and it could be that
water pressure not enough to pump up? so yamaha s don't have water pump!
@BrisbaneYamaha
5 ай бұрын
No garden hose pressure isn’t enough to push water to impeller
I don't know what the best way is some people say run and flush others say like this. I love this guy but I'm about to buy my first boat with a Yamaha 60 I hope I can get the correct information on the other hand it Yamaha wouldn't have put it there if I didn't work properly I will always trust Japanese engineering
@BrisbaneYamaha
11 ай бұрын
Why would I lie Why wouldn’t I know this Why won’t you believe yamaha It’s not hard
@standardlife8176
11 ай бұрын
@@BrisbaneYamaha yea mate I do that's what I'm saying and I never said you lied All I was saying is I hope I can work it out before I buy my own boat and yes Yamaha would be the only motor I would trust I'm actually buying a boat from you guys so be nice hahaha have a good one mate 👍
And all this time I thought the water pump/impeller pumped the water into the motor
@brandonmizell468
Жыл бұрын
It does… against gravity… the way he is doing it is flushing from top down
@BrisbaneYamaha
Жыл бұрын
Yes but the water has to get to impeller with enough volume lots of people don’t have very good water pressure
@mikep303
Жыл бұрын
@@BrisbaneYamaha if my impeller is working correctly my earmuffs will will pull water out of a bucket with 0 water pressure if it doesn't time to replace impeller
Yeah ok. Not so angry though
@BrisbaneYamaha
Жыл бұрын
Sorry visit brisbane yamaha and get a free tee shirt
Laughs in Mercury 😂😂😂😂😂😂😂
@BrisbaneYamaha
Жыл бұрын
The old black anchor
Me just using a 100 gallon bucket to flush it
@BrisbaneYamaha
11 ай бұрын
I think that’s best way At dealership we have tanks we push up to outboard so we can run outboard
How to not wreck your motor. I'd love to have a freshwater flush. 2 strokes don't have them.
@BrisbaneYamaha
Жыл бұрын
Yamaha 115, 130 and 150hp 2 strokes did
@jimmykipper3985
10 ай бұрын
My bosses older 200 hpdi had this system
@Thunderbirds404
10 ай бұрын
Maybe it's the 9.9-90s that didn't have them
Are you serious im moving back to Solomon Islands soon im only going to use yamaha
@BrisbaneYamaha
29 күн бұрын
No other deans last in the islands it’s quick and easy
@BrisbaneYamaha
29 күн бұрын
If your using boat every day do nothing
Is it meant to pee out the top hole as well ?
@BrisbaneYamaha
5 ай бұрын
Yes
Whats an American fitting? Lol😂
@BrisbaneYamaha
Жыл бұрын
Not metric
Out of curiosity is it ok to still use the old way on a smaller outboard? Like a 25?
@BrisbaneYamaha
Жыл бұрын
Yes Best is big bucket
I locked my motor up with a water boot 😢
I really disagree. Yes you can flush the engine fine. However it is lacking on the lower unit. It’s always better to use a good set of flushing ears. Glad to see you threw away those cheap set
@BrisbaneYamaha
5 ай бұрын
If you know more than Yamaha technicians go for it It’s your outboard
mercury do the same way.
@BrisbaneYamaha
Жыл бұрын
So do yes because it’s better
i hot flush, with motor running, with ear muffs on, then cold flush with the hose outlet, This is what yamaha told me to do when i called their warranty department, so pretty sure this guy is bs. also would open cowling latches every time i flush, to keep those from seizing as well.
@BrisbaneYamaha
Жыл бұрын
Your an idiot I’ve been biggest yamaha dealer in Australia for 15 years and you think you know more I give 6 year’s warranty on Yamahas sold and serviced by brisbane yamaha that’s 2 years longer than yamaha Do what you want with your outboard and I’ve go no issues with ear muffs if used properly or even better a big bucket but why would I BS ? Just use the fresh water flush if your motor has one and you’ll never have an issue
@TripSmith
Жыл бұрын
@@BrisbaneYamaha hehehehe....
Yamaha sounds like a problem if you have to do that.
@BrisbaneYamaha
29 күн бұрын
Your an idiot
@kennanok9089
29 күн бұрын
@@BrisbaneYamahayou're the idiot.
@kennanok9089
29 күн бұрын
@@BrisbaneYamaha you're the idiot.
Suzuki has always had this feature.
@BrisbaneYamaha
10 ай бұрын
Wrong But yes now As all outboard will/ do Difference is o my yamaha are designed from ground up as an outboard Buy yamaha or buy second best Just true
It flushes like crap though!
@BrisbaneYamaha
3 ай бұрын
Yes always have been if water pressure is an issue
i got the same thing on Mercury 90hp, but dont have it on mercury 8hp
@BrisbaneYamaha
Жыл бұрын
I’m sorry
can you run it with that?
@genestrause6297
Жыл бұрын
No
@BrisbaneYamaha
7 ай бұрын
Yes but you shouldn’t
Sorry but your thermostat’s need to be open so the heads can flush 💯 percent 🙄jost keep doing it the old fashion way 👍
@BrisbaneYamaha
7 ай бұрын
Sorry your wrong do you think yamaha who pride themselves on reliability would make something that didn’t work? It’s your outboard do as you like but yamaha recommends you use fresh water flush!
@-CHeWy-
6 ай бұрын
Agree. This is not a 100% flush. People dont seem to realise this.
that only flush the engine not the leg,
@BrisbaneYamaha
Жыл бұрын
Why would yamaha do that? It flushers the entire motor including the leg and both sides of the thermostat Yamaha are the largest selling outboard in the world for a reason
It doesn’t flush the thermostat so no it bill crap the only way it will get past the thermostat is if the motor is running so if Yamaha told you the freaking sky was pink and not blue does that mean you have to believe it of course they want you to do what they want that way when it feels and have to life for the motor you have to buy another one they don’t want it to be fully taken care of because I didn’t want it give them profits run your motor and flush it out correctly
@BrisbaneYamaha
11 ай бұрын
Your an idiot Why would yamaha tell you to use a product and it not work It’s your outboard do as you like but yamaha is the world leader in outboard with a reputation and company ethos for reliability!!!!! But you know more ?????
@andrekemp5059
9 ай бұрын
I agree 101%
@andrekemp5059
9 ай бұрын
Money make people Funny.😂 How can you call him an Idiot?😅 Then all the powerboat peoples are Idoits at the wheel flying there boats over the water. Fresh water everywhere is mutch better flowing true around all places. Salt is a Eater if it gets place and time. Jes you can us that side Pipie not to piss off People whatching TV next door. But we dont Buy outboards not to hear what we are Paying for. Petrol engins Sound like Music
@Prest0h
5 ай бұрын
There is bypass holes in the thermostats to get into the cooling passages when you use the flush port