If there was an award to win for thee Best All Time Tutorial Video Online, YOU would Win It! “If you can't explain it to a six-year-old, then you don't understand it yourself” Albert Einstein You Nailed It! Kudos! Thank u Ever So Kindly! 🤗🤗

This video was very helpful and my machine was fixed within minutes after watching your video. Thank you so much. I have a Juki DDL 8700 but the parts were the same. Thanks again.

Thank you for this wonderful video! I was intimidated to take off all of the pieces surrounding the bobbin, but this video gave me the courage to go for it. Thank you!

The Best video I've seen on how to fix stuck thread. I was apprehensive on doing it. Feel more confident after watching this. Fantastic help.

Thank you from a new 1181 owner. This video was very helpful and I agree the better you understand your machine the quicker you can get back to work.

Thank you Dina! This video was a lifesaver for me! I was able to fix my Sailrite fabricator. Genius idea with the magnetic bowl!

hi I am so grateful to you sharing your video , it enabled me to fix my machine and save a call out .i live in South Africa and would give you the biggest hug if i could thank you again

What a great idea to use the magnetic bowl. I can’t tell you how many times I dropped a screw and spent way too much time looking for them. Eventually I did but what a PITA! Ty for making this. It was very helpful.

@gergemall

Жыл бұрын

Agreed . Thank you ❤

Thanks a zillion! It worked on my Juki DDL-8700!💃Mine was jammed from a broken needle; the very end got stuck somehow. Wasted hours watching videos how to fix it with no luck! Now I only have to figure out why my needle isn't picking up the bobbin thread.

Thank you so much! My son just fixed my machine. Great video!

Thank you so much for this video! I've had to unjam my 1181 twice now and this video is a life saver!

Thank you for having this video. It save my life. Please this video up.

Thank you! My machine is a needle-feed Jocky, but very similar to yours. I started taking apart the bobbin case and hook area without a clue what I was doing, taking pictures as I went. After so far though I started getting worried that I was getting in too deep... so I looked for a video and watched a few that didn't seem to help. Then I found this one. Machine is de-jammed 😊 and put back together and working... no going on the hunt to find a local repair shop willing to take it on (been tough in the past), hauling it in, and paying well over $200. It was very nice of you to post this video for our benefit. Heaven bless you!

I cannot thank you enough for making this video. We go it fixed and it's stitching great.

I was having problem with my Juki TL 2000q with the thread jammed underneath. I tried to fix it and had given up. I saw your video and it really helped me to fix my machine. I want to thank you so much for your knowledge and expertise. My machine is operating good. Thank you.

Thank you so much for making this video! My machine jammed like this for the first time ever, after 12 years of sewing, and I would never have been able to figure this out on my own.

God bless you for this😭😭😭 you have no idea how much i needed this right now

Thank you, thank you, thank you! I have a project due tomorrow. I just spent two hours screwing around with it.

Thanks SO much! I’ve been sewing professionally for too many years to count. My thread got jammed this morning just like your video. I have a Juki ddl -8700 so almost identical. You saved my day, I would have had to travel 150 miles and who knows how much money to get it repaired without you. Now on to my next job… 💪🏻

@dinastevensmamamonarchdesi8823

2 жыл бұрын

You are so welcome!

Thank you so much for your video. I had the same problem with my Juki sewing machine and was devastated by the thought that I had to spend hundreds of euro on repair but now my husband was able to fix it. Very detailed and very helpful video. Thank you

Brilliant! Thank you so much for your really helpful video. I panicked when the machine jammed in the middle of a UK Bank Holiday! You explained each move so clearly that when it didn’t work first time, I rewatched and listened to the video, realised I’d missed a detail, persevered and Bingo! Success on the second rebuild. You method worked perfectly on my Juki DDL-8100e. Thank you!

Thank you so much I was able to fix my DDL 8700 H using this video I didn’t know what was going on a locked up on me and I followed the instructions and I was able to use my machine. Thank you.

The best video I found for fixing my frozen machine. A needle broke and jammed itself inside the bobbin casing, and I was very much afraid to take anything apart. I have a Consew industrial machine and (fortunately) all the working parts in the bobbin casing were the same as the Juki that you were working on. Thank you so much for taking the time to video, explain, and post this video. Also, thank you for the tip regarding magnetism for screwdrivers. 😊

Dina Stevens, your video on how to remove stuck thread in bobbin on Juki sewing machine is a NO-Nonsence video. This is how a video is supposed to be. I fixed my thread stuck issue watching your video. Dina Stevens thanks a million.

Thank you so much for sharing it It saved my life today This was the second time i opened this but my baby brain was not working at all Appreciate it 😊

I wanted to thank you so much for your video yesterday I had this problem on my Juki ddl 8700. First thing I thought was “it will cost me $300” to repair. I watched your video twice to get familiar with the pieces and zasss I did it. It worked wonderful. Thank you so much again.

Thank you for this video.. My machine got jammed and I was able to get it back up and running without tension issues.

You are a life saver, thank you! I used this video the first time on Friday and it just did it again and I watched again. Thank you!

@dinastevensmamamonarchdesi8823

3 жыл бұрын

You are very welcome!

You were soo brave to do this it’s scary my machine is so stuck, the bobbin won’t even come out at all! Gonna watch your video over and over hope I can do this! Thank you soo much!

Thank you so much for making this video, I haven't had this problem yet, but you just never know when you will need this information.

Thank you so much! I was ready to give up before I watched your video. You explained it so well that I was able to figure it out. I'm so happy I didn't have to take the lever bar off all the way like another video suggested.

Yay!! Thanks for the video - I teach sewing on industrial machines and always have this problem at the beginning of the year. Fixed one this morning with this video - different model I have but works the same way!

I’m so glad I saved this video! I just used it to fix my Juki DU-1181N. Your a lifesaver 💕

Thanks so much for your video, Thanks for the close ups. It's amazing what a tiny piece of thread can do. I suggest people do not force the wheel, they may end up with the machine out of time. We watched the other guys too, but seen your video coming up so we watched it too. And, we're glad we did, we could see better and we are glad we left the bar on like you did. It went well. The thread that came out of there was only about 4 inches long max. THANKS AGAIN

Thank you for this. I have a zoje and we were able to follow your instructions and remove the wayward thread.

Oh My Goodness! Best video. I have a DDL8700 so very close. I almost started to take it apart on my own but thought I better see if I can find a walk through video. You nailed it and saved me a trip and money...yay. These beast are heavy to so when hubby is not around what a chore. Thank you I sure did appreciate this.

Dina, thank you thank you thank you. You saved my husband's life. I have a spanking brand new machine and as he was putting everything together he managed to jam the machine with thread. Thank you 😊 💓 ☺️

You are the best!!! Fixed my Juki 1181 with your help!!!

THANK YOU, thank you! I fully understand now how to fix my machine! I hope to be able to get to it as soon as I get my hubby to loosen that first screw that holds the bobbin case in! You have saved me much worry and a trip to Chicago to get it repaired! Thank you for taking the time to actually video when you had the stuck thread! It made it so much more legit! You've just became my new best friend!

@dinastevensmamamonarchdesi8823

3 жыл бұрын

You are so welcome! That screw is tough. I make sure I tighten it well but not too tight that I can’t get it off again.

I dont often put comments on this type of videos. But madam you really helped me out. Thank you!

@dinastevensmamamonarchdesi8823

3 жыл бұрын

You are very welcome!

Your video was exactly what I was looking for! Thank you so much for the up close detail! You are my new hero! Thank you, thank you, thank you!!!!!

Thanks for this video, I don’t know why I didn’t think of doing it this way. I maintain all of my machines so I’m really comfortable taking apart, cleaning, and oiling them. Up to this point I just cut my needles and worked from the top. Doing it your way you will want to check your timing and feed dogs are still centered after loosening these screws that hold the needle basket in place that has been moved to remove the bobbin casing.

Thank you very very much your video has helped us to repear our loved Juki

Thank you so much for this video! Last time I had to depend on my husband’s muscle to twist the turn wheel to unjam it. Next time, I’m going to attempt to fix it myself!

You are awesome!! Thank you so very much for this video, it helped me so much, now I know how to take the thread out my yuki when it get stuck. 👏👏👏

Thank you so much for this instruction, Dina! My husband was able to fix this very same problem on my Seiko industrial machine which appears to be very similar to the Juki. Hope you video some more fix-it scenarios 😀

OMG I love you! I was pulling my hair out and had to have my husband come and help me and your video helped him fix it !

Thank you so much, your video helped me to fix my machine.

Thank you so so much for this video. I have a jooklook and it is basically the same as yours. I had the exact problem and thanks to you I unscrewed them all and found the little thread and fixed my machine… it took me a long time but otherwise I would have had to wait for a mechanic and he could come next week… I was lost and you saved me. Thank you thank you thank you ❤ ❤❤

This helped me so much. Thank you for sharing.

Thank you, Thank you, without your video on this I would have been totally loss. It’s not much information or instructions on these machines, I’m grateful you recorded this.😊 I was able to fix the needle jam.

@dinastevensmamamonarchdesi8823

3 жыл бұрын

You are so very welcome

Thank you so much for your video. It helped lots! Mine was stuck so I used Cable Ties / Zip Ties and weaved them to the holes which made it much easier get to get it moving. Much appreciated.

@dinastevensmamamonarchdesi8823

3 жыл бұрын

Smart idea!

You just saved me so much time effort and money... Seriously thank you so much!!!!!!

@wyd2937

3 ай бұрын

One thing to note when removing the tiny screws make sure when putting them back be very careful you don't strip them!

Thank you for doing this. this was so helpful!

Thank you so much, you have just helped me mend my Juki.

Thank you for your video, it really helps me so much ☺️

Thank you so much for this video I have a brother industrial and couldn’t find any other vids that helped but yours was brill 👍🏾👍🏾👍🏾

Thanku for the video I don't have the same machine but the machenics are the same you saved me calling someone in to fix it ..and Ur rite those tiny little screws had a dish underneath still dropped 2 on the floor..they are so hard to find thankyou again ..

You saved my day. Thank you

Thank you so much for making this video. We have a Juki 8700 and I think this is the same issue.

Hi! I just found your channel and subscribed. This video was very helpful. Thank you!

Thanks for your great training and it helped me ❤❤❤❤❤

Good video! I was afraid I would break it but the wheel finally freed up

Dina, thank you for having the fore-thought to record this when it happened!!!!!! I went to bed at 1am last night trying to get this thread out of my machine and someone on the juki1181 group directed me to your video. You are a life saver. On my way now to open my machine. Thanks again!!!

@ruthallen712

3 жыл бұрын

Hey Dina, if you happen to read this today 4/10/21 by any chance I have a question. I have been trying for the last 2 hours to get the tiny itty bitty screws out and so far only 2 came out. They are super tight and my juki tiny screwdriver is bent at the tip. any suggestions on getting them looser or any tips to get them out? Just wondering. The edge of my fingers are raw so I'm taking a little break. TIA

@scoker267

3 жыл бұрын

I had to use a tiny flat head...the width is about 1/8"...not sure where I got it, but it was the only one that worked.

Exactly what I needed! Thanks muchly!

@SueC56

3 жыл бұрын

But I should have kept my screws in order and/or viewed the entire video to find out that they aren't all the same size! I couldn't imagine that they were different. But it is all back together and working. Thank you SO much for doing a 1181 specific video.

Amaizing 😊 really helpful thank you for this

I loved your video. I could not get the basket out. I pried with a screwdriver in several spots. It was stuck. And then I chose the wrong spot to pry, and yes, I broke it! Ordering another hook assembly part. I can still see the piece of thread that is jamming the machine. I guess I will have to take the new part and the machine to get it serviced. Just bought it. First project. 😢

@dinastevensmamamonarchdesi8823

3 жыл бұрын

Oh no! I’m so sorry. Sometimes adding a little oil around the bobbin casing helps. If it is still stuck reach out to me and I’ll walk you through it. I jam thread enough that I’m good at it now so I’m happy to help. Couple of things to avoid that are don’t load your bobbin completely full and make sure it’s wound tightly so it doesn’t spin loosely and nest on the bobbin. Unfortunately that is a flaw to this model but those two tips will help immensely.

@judyslonestarshop

3 жыл бұрын

@@dinastevensmamamonarchdesi8823 Thank you for your quick reply. I’m too spooked now to proceed. Even if I somehow I got that last piece of thread out, I can’t use the machine with the crack on the basket edge. But I appreciate you being willing to help me. Thanks. 😊

Thank you soo much! I’m still scared of my new Juki DU 1181n and this helped us so much!

@dinastevensmamamonarchdesi8823

3 жыл бұрын

You are welcome. I was scared too. Having to fix it a few times made me so much more comfortable and I love it even more now.

@mskweenie860

3 жыл бұрын

@@dinastevensmamamonarchdesi8823 hi dina please which screw driver did you use

Thank you so much for this video!!

Thank you so much you are a life saver.

Thank you Thank you and Thank you for this video ,it was a life saver for me ,God bless you XXX

Thank you so much for sharing this! But... Do you have any idea what to do if the hand wheel is jammed in a position where I can't remove the bobbin casing? 😭 Just my luck...

@dinastevensmamamonarchdesi8823

3 жыл бұрын

Hi Kathryn. When I have thread stuck between the bobbin casing and the machine it will cause the hand wheel to seize up. That’s the only time the hand wheel ever seizes. In my experience trying to loosen it with oil and getting the bobbin casing to spin and removing the stuck thread or if you can’t then follow the steps in the video.

@kathrynvannuland9559

3 жыл бұрын

@@dinastevensmamamonarchdesi8823 you are truly a savior 🥰 thank you so much!!

@mskweenie860

3 жыл бұрын

@@dinastevensmamamonarchdesi8823 please which screwdriver did you use

Thank you SO much for this! We followed your amazing video but now my needle is hitting the bobbin case and breaking. I'm wondering if we put the bobbin case holder thing back in correctly, do you have any tips or experience with incorrectly aligning it and this happening? I have a brand new Juki DDL 8700 and have no experience with industrials and no industrial repair service nearby ugh. Figured I'd ask since you clearly know your way around these things!

thank you so much for this video😊

Hello this video is such a blessing. I am unfortunately having a really tough time putting the bobbin basket in so it hooks onto the tooth of that side bar I loosened. I did manage to free the half needle that got stuck. I've been worried all night about fixing this. there doesn't seem to be a lot of industrial sewing repair people here in New Bedford MA. And this machine has been such a great help in bagmaking. Again I thank you no matter how this turns out. I may have to lay on my back to line it up correctly. I will let you know how I make out. thanks again!

@dinastevensmamamonarchdesi8823

3 жыл бұрын

Melinda Matos. I hope you are able to fix it. I know how frustrating this can be. I had this issue before and it was because my needle was in the down position causing the bottom fed plate to be low. I only needed to rotate the hand wheel a little moving the bottom feed dog to the up position. I hope that helps. Good luck!❤️

@Mellie726

3 жыл бұрын

@@dinastevensmamamonarchdesi8823 Hi Dina, I followed your directions about the tooth from the side bar positioned into that space in the hook. My soninlaw tightened the screw for me and it worked. But only one thing every now and then if you happen to put the needle down in the feeddog bed without fabric in between it hits something. other than that with fabric under it it sews perfectly. may have to look into getting someone here just to be on the safe side. Not sure b/c of Covid 19 if they're doing house calls but we'll see. Again thanks so so much. Without your video I would be absolutely nowhere. Have a great weekend!

@Mellie726

3 жыл бұрын

Hi Dina could I trouble you to answer one question, but you have to lift your machine. Would you be able to tell me if the position finger that holds the bobbin basket in that little oval circle, (that you show in your video) flush against it or does it drop a little, it seems like mine falls a little and then I sew and then the finger is out. (the screw is tight) thank you in advance!

@dinastevensmamamonarchdesi8823

3 жыл бұрын

Melinda Matos it does drop down a little. It sits flush with the surroundings. Did you fix your needle issue? You might want to check and make sure your needle timing is correct. You can find me on Facebook and add me if you have more questions. That way I can send you pictures. There’s an easy to follow video out from Steve at sewing gold on how to check your needle bar timing. Before you take the face plate off look and see if it needs to be timed. You also might want to put a new needle in to see if that fixes your issue.

@Mellie726

3 жыл бұрын

@@dinastevensmamamonarchdesi8823 thank you Dina, I responded on Mama Monarch Designs, thanks so much again!

I did exactly as you described worked perfectly, but I dropped a couple of the screws and can't seem to find replacements, do you know what the technical term for them are? I ordered some but they didn't fit.

Thank you so so much, I have a DL 8700 but it’s pretty much the same process.

@mskweenie860

3 жыл бұрын

please did you do it and which type of screwdriver did you use

@mskweenie860

3 жыл бұрын

for the 8700 please

Great very useful video

❤ thanks alot you've really help

You are a life saver thank yoi so mich

Wow! I conquered my fear! I have been really scared to do the big UNJAM since the 1st time it happened to me but with your video, I was successful in getting it apart and then back together again! I have a Consew P1206rb-1 and it's exactly the same as your machine, just a different label. THANK YOU! Do you have a video on adjusting the timing??

I greatly enjoyed your video and learned a lot from it. Thanks! PS: 1. You can buy a simple, inexpensive tool to magnetize and demagnetize your screwdrivers. 2. Would it be advisable to use a removable thread-lock compound on those tiny screws that must not work loose? E.g. Loctite Medium Strength Threadlocker (Blue 242). Both may be found at your local Ace Hardware and online.

My needle and hand wheel wont move. Do you think this could be the problem? I did notice I had 3 strings of thread on the bottom when I pulled the material off. Now it won't move 😒 new machine 😒

Thank you I'm so glad I found this video. We didn't know how to fix the machine and no dealer support but with your help we are back up and running and have learned exactly to resolve this issue. Take a bow.

@dinastevensmamamonarchdesi8823

2 жыл бұрын

ImThat is awesome. I was in that same position.

Any tips on getting some of the screws out? Even my husband can’t get a couple out 😩

Thank you,very much.

The only good video was spoken in another language than my own. Videos are so helpful

What do you do when your screw driver breaks, but the little screws don’t budge?

Hello, my needle on my DU1181n is hitting the bobbin casing and breaking the needle. Can you tell me how to fix this please. My machine is brand new and started sewing but then this happened. Many thanks,

Life saver.

Thank you very much.

Thank you so very much 🙂

Rotate the machine in reverse, using a screwdriver through the handwheel if very tight, no need for loosening or removing any parts. There is a video on “Oz commercial sewing machines”

Thank you so much. But, I cannot get my bobbin case out to try and fix this jam

Thank you!

What do you think causes this problem? Do you think that the bobbin backlashes, and wonder if so, would a spacer in the bobbin help.

@marsanhe

2 жыл бұрын

Please respond to this question, somebody?

Thank you so much 💓 💗 💛 💖

Thanks for the video, everything lined upp correctly but it looks like the last cover with the tiny screw keeps obstructing the needle. Any ideas what i can do

@dinastevensmamamonarchdesi8823

3 жыл бұрын

Can you send me a picture? Mama_Monarch @outlook.com

I finally got it back together but something isn’t sitting right. Stitches 4-5 then the needle hits something and breaks. Help!

thank you very much for the vdo. but after fix it all there is a weird sound coming from inside. why 😢